Page 1 of 1
VHF Astro Spectra IMBE issue
Posted: Mon Sep 26, 2011 5:05 am
by glock318
I recently Flashed a astro ready 1meg 12.5 VHF astro spectra 110w for IMBE operation. I saved all the tuning data and it seems that I have an issue receiving and transmitting any digital signal. It transmits and receives analog fine. But from what I under stood it may need tuning for the tx side but I shouldn't have an issue receiving correct as for there is nothing to tune on the rx side. Any suggestion to check? Thanks Josh
Re: VHF Astro Spectra IMBE issue
Posted: Mon Sep 26, 2011 9:29 am
by jmr061
What did it start out with for host/dsp and flashcode and what are the same things now?
Jason
Re: VHF Astro Spectra IMBE issue
Posted: Mon Sep 26, 2011 2:05 pm
by d119
glock318 wrote:I recently Flashed a astro ready 1meg 12.5 VHF astro spectra 110w for IMBE operation. I saved all the tuning data and it seems that I have an issue receiving and transmitting any digital signal. It transmits and receives analog fine. But from what I under stood it may need tuning for the tx side but I shouldn't have an issue receiving correct as for there is nothing to tune on the rx side. Any suggestion to check? Thanks Josh
This isn't the one I sent you, is it?