Batboard

I have 2 identical HT1250/GP380's.

Having programmed around 200 channels into one radio, I would like to just use the same "fully loaded" codeplug and write it to the other radio.

I THINK this should be OK and will NOT result in the tuning values of the 1st radio being loaded into the 2nd radio.

However, I want to make sure that its OK!!! I know with Jedi stuff that you need to be careful in using codeplugs from other radios as you might load the wrong tuning values. The Waris radios have completely separate tuning software so I don't think the codeplug carries any tuning data?

Any views?

Thanks

No, cloning the radio won't clone the tuning partition. Typically, you only have to worry about this with old analog Sabers, and when playing with non-standard RSS tools.

Thanks tvsjr

HT750/1250's won't handle 200 channels

My "HT1250" is actually a European GP380 which is physically identical but has different firmware.

The Euro firmware has 255 channels!!!