Carefull, if Nand's head gets any bigger, it won't fit into his picture frame ...

They do come up on eBay every so often... You may have to be patient...

Keep in mind, that if this mod. radio is read by ANY other RSS software other then the one YOU have modified, ...POOF!! your radio will read to "them" as a 2 channel only. :oops:

Keep a back-up of your software in a safe place. At the very least, print off the page that details how to do the mod ...

... Don't point him to things like toolkit unless it's clear it was hacked, which I haven't seen any evidence of yet.

Todd

Sound's like everyone else on this board is saying it may inded have been hacked...

Of course the only way we might know for sure is by the radio's model number. Unless ...

As most have stated here... I would stay away from the SP50. I work part time as a Paramedic at Canwest Global Park (baseball) during the summer and they use SP50's. Not a day goes by that some sort of problem with them comes up (I use my own GP300). Some of the problems that have occurred include ...

This "might" help... If the radios have been hacked, try getting ahold of Tool Kit (mentioned on BatLabs, but you will have to find it on your own). I've used it and have been able to convert many P110 (4 and 6 channels) to 16 Channel. This was needed in order to gain the scan feature. :wink:

If ...

What was the Question????

I work for a rural Ambulance and at any one time I have on my belt a VHF (we use for communications between crews), a Fleetnet radio (800MHz) for communication with Dispatch and other agencies and a cell phone (Motorola MicroTAC) with no problems. Almost all (if not all) the hospitals in Winnipeg ...

Well, check it out...

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 1740430995

It sold for $290.00US (a lot lower then I thought !!)

We'll see what the future holds for this latest /\/\ product...

I purchased one of these about 4 months ago and it's an all-in-one type unit. :D With this you don't need anything else (except a computer and the RSS software of course :wink: ) and the price is not bad.

Check it out. He sells a lot of these on e-bay and there is one up for "auction" every few ...

Hey,

Check out the following eBay link.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 1359554161

This is the same unit I have and it programs my TK270G , TK3102 with NO problems!!

"Add a wire from the 7.5 volt point on the programming adaptor
to pin 12 on the RIB connector and that will also power your
RIB from the same source as the radio gets it's 7.5 volts. ..."

Will it work in reverse? (i.e. Power from the RIB to the radio via pin 12). :)

Which model of Kenwood are you attempting to program... (i.e. TK 270, TK370G, etc)

Well, lets see... The Minitor II goes for about $100.00 to $140.00US on ebay, the Minitor III tends to go for around $250.00 to $300.00 US ...

So my guess is that the Minitor IV should go for approx. $800.00US :wink: ... or more. :roll:

May make more sense to buy a GP300 with QCII. At least you ...

Well, it has landed...

http://cgi.ebay.com/ws/eBayISAPI.dll?Mf ... 1740430995+

Check it out!!

Top this... a few weeks back I came across a GP300 user manual (the one you get WITH the radio) sell for $39.00US!!!!! :o

I just wished I had 50 of them. :wink:

Of an interesting note... I purchased the exact same user manual for $3.00US last year. :D

Add in people selling the battery clip ...

I seem to have "resolved " the issue.

Thanks to all that posted your comments, they were very helpfull.

THANKS!!

I am using Windows 2000 (Ver 5.00.2195) SP1 on one computer and Windows XP Pro (build 2600) and have had no problems with ver 3.1 on any of the systems that I have had it on (I prefer the XP based system). A friend of mine also had it running on NT (SP6?) with no problems as well.

You may have to ...

Susan,

Thanks for the offer... The guy I purchased it from took it back and has since replaced it with a HMN1033 and it seems to be working just fine.

Again THANKS for the offer!!!!!

Well, If the only option that you are left with is the FRS radios (gag!!), and if the convoy is spread out over 1 to 2 mile distance, they may work. If the car in the front is trying to reach the car in the rear, you may have to have the car in the middle relay the message...

In theroy, the basic ...

I got to find that room full of old /\/\ equipment and put it up on eBay....

What did old Pete Barnum say... "...there's a sucker born every minute..."!

That's not a bad idea... I am getting tired of finding a good used /\/\ hand held (like a GP300) and people on eBay (usually a new commer) getting a real bad case of "bidding fever"!! :evil: The net result is over inflated prices.

The radios MAY be worth it, but when you look at the exchange rate ...

Does anyone know if the HT1000 or P200 can have a scan mode/channel set in it?

The guy I bought it from on eBay exchanged the mike and the one he sent me for one that does work.

It turns out that the "original" mike he sent me is worth more then $400.00 CDN! I hope he will get more then the $50.00 US I paid for it!!!!

Post from: Susan157

> "When u did the upgrade did u put it on the service monitor to > see the change.This is a must when u are doing a good job."

When I did the mod on a friends SM120 with ver.1 of the RSS, I only "lowered" the band split from 150-170 to 140-170. for the most part going down (or ...

Sorry Jay, your options are limited...

Part of the problem is /\/\ wants to protect its dealer channel :evil: and that can't be done if it was an easy matter for you (or any one for that matter) to get your hands on the RSS. As a result, /\/\ puts a few road blocks in the way for the "average ...

I just completted a "out of band" mod on a friends SM120 VHF (150-170) and lowered it into the 140 range and he reports that it works just fine.

It was a PAIN trying to get the checksum to match back up again (it took about an hour worth of tinkering).

Give it another try, JUST REMEMBER to make a ...

Please see new "problem"

********* Original Post**********
HELP!! How do I (or can I) get a DTMF mike to work on a SM120.


********** New Post************

The Mike I have is a "HMN 1014ASP01"...

Turns out this Mike is for a Syntor X line of Mobile Radios. NOT the SM120, GM300, etc. :evil:

The question I have is:

1 ...

Sorry about that.... the Model number is P94YQS20G2AA I chalk it up to too little sleep...

Thanks for the reply,

This radio looks just like a SP50 just the front plate says SP50+, its about 1/4 smaller (but identical in all other respects).

The model number is P94YQS20GAA. The radio is a 10 Ch. UHF and other then the fact it looks like a shrunk down version of an SP50, its the same ...

Hi all you Moto fans!!

I have come accross a SP50+ Motorola radio (UHF) does anyone know what RSS software is used to program it?

I know it does not use the SP50 RSS software.

Hope some one is able to help me!!

THANKS!!

Grenadiers