Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Search found 36 matches

by citylink_uk
Tue May 21, 2013 4:29 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CM series ignores PL/DPL
Replies: 6
Views: 2172

Re: CM series ignores PL/DPL

when the setting is enabled the radio will be monitoring the channel in CSQ when the mic is not hung up. try grounding the clip on the back of the mic and see if your problem goes away. I will also see if I can find were in the cps the setting is. let me know what you find out I appreciate your hel...
by citylink_uk
Tue May 14, 2013 1:49 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CM series ignores PL/DPL
Replies: 6
Views: 2172

Re: CM series ignores PL/DPL

Rich, Can you tell us a little more about your problem? by ignore do you mean it does not unmute? or does it unmute for everything? perhaps it is monitor when mic off hook setting? Basically it will unmute on any signal received, rather than unmute on receipt of the CTCSS tone. Not sure about the m...
by citylink_uk
Sun May 12, 2013 7:13 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CM series ignores PL/DPL
Replies: 6
Views: 2172

CM series ignores PL/DPL

Hello all,

I have a CM series mobile that seems to ignore all programming for PL/DPL on RX.

Does anyone have any experience of this or any advice?

Thanks.
Rich
by citylink_uk
Sun Feb 03, 2013 12:03 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CM360 as repeater - pin problem?
Replies: 3
Views: 647

Re: CM360 as repeater - pin problem?

The only ones I can change are #3,4,8,9,12,14.

Of those all are set to disabled apart from.

RX Radio - Pin 8 : Car Audio Mute
TX Radio - Pin 8 : Voice PTT
by citylink_uk
Sun Feb 03, 2013 11:43 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CM360 as repeater - pin problem?
Replies: 3
Views: 647

Re: CM360 as repeater - pin problem?

Also noticed that the radio will only pass audio when VOX is ticked in the personality.
by citylink_uk
Fri Feb 01, 2013 4:17 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CM360 as repeater - pin problem?
Replies: 3
Views: 647

CM360 as repeater - pin problem?

I'm setting up a small repeater using two CM360 mobiles, using one of those cheap ebay cables to connect the radios. The setup does "work", but there is an issue. The TX radio transmits audio from the RX, but is only TX'ing when audio is received and not on receipt of the carrier. If I sto...
by citylink_uk
Thu Sep 20, 2012 5:20 am
Forum: Base Stations, Repeaters, General Infrastructure
Topic: Eurobase M1000 controller?
Replies: 0
Views: 194

Eurobase M1000 controller?

I have a Eurobase repeater that has a controller marked M1000. I'm looking for info on how to program the repeater hangtime. It's the same unit as show here > http://img832.imageshack.us/img832/5682/img0134es.jpg But with M1000 in place of the Motorola logo. Can anyone assist? Thanks Rich
by citylink_uk
Tue Jan 31, 2012 4:04 pm
Forum: MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
Topic: Harris enters DMR/TRBO market
Replies: 5
Views: 771

Re: Harris enters DMR/TRBO market

wiscomm wrote:(sorry if off-topic)

Looks like Harris will be entering the DMR (TRBO) market with the new "Momentum" line, which appears to be made by Hytera.

http://www.pspc.harris.com/solution/momentum.asp

Announcement due at IWCE 2012 in February.

Craig


Isn't this just rebadged Hytera kit?....
by citylink_uk
Wed Jul 14, 2010 12:40 pm
Forum: Radio Programming
Topic: MTS2000 - Error when reading
Replies: 9
Views: 845

Re: MTS2000 - Error when reading

Hi, I don't actually have the M2100 RSS at the moment, but i'm looking for it.

Rich
by citylink_uk
Sun Jul 11, 2010 8:46 am
Forum: Radio Programming
Topic: MTS2000 - Error when reading
Replies: 9
Views: 845

Re: MTS2000 - Error when reading

I guess I'll have to try and find a later version of the CPS then, as I only have 2.00.01

It looks like someone may have either re-cased or re flashed it. It has the typical MTS2000 label, but with ABC toggle and a two position rotary switch.

Thanks,
Rich
by citylink_uk
Mon Jul 05, 2010 3:18 am
Forum: Radio Programming
Topic: MTS2000 - Error when reading
Replies: 9
Views: 845

Re: MTS2000 - Error when reading

Looking at the label, I think this may be a Spanish or Portuguese radio. http://img714.imageshack.us/img714/366/05072010114copy.jpg Uploaded with ImageShack.us Service info says: 826400 7x01 H01RDD9AN5AN 432IXW2734 - As the model numbers don't match, perhaps it's been reflashed? Thanks, Rich
by citylink_uk
Sun Jun 27, 2010 10:00 am
Forum: Radio Programming
Topic: MTS2000 - Error when reading
Replies: 9
Views: 845

Re: MTS2000 - Error when reading

Is there any way to tell without actually reading the radio? I can get it to show the Service info on the top display, but not sure what i'd be looking for.

Sorry, it's been a while since I last looked at an MTS!

Thanks,
Rich
by citylink_uk
Sun Jun 27, 2010 2:27 am
Forum: Radio Programming
Topic: MTS2000 - Error when reading
Replies: 9
Views: 845

MTS2000 - Error when reading

Hi all,

I'm getting a "Error reading from image when attempting to unpack unblock Radio Wide Unpack failed" when trying to read the radio. I'm using R02.00.01.

Does anyone know what this is?

Thanks,
Rich
by citylink_uk
Sat Mar 27, 2010 12:50 pm
Forum: MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
Topic: Vertex MotoTrbo radios
Replies: 13
Views: 1682

Re: Vertex MotoTrbo radios

Vertex will be releasing TDMA radios late 2010. Press release : http://www.prnewswire.com/news-releases/vertex-standard-announces-digital-radio-launch-plans-87114862.html Not MotoTRBO, but still two-slot TDMA to the ESTI standard. In theory they should be interoperable with MotoTRBO and other manufa...
by citylink_uk
Tue Mar 17, 2009 3:42 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Ideas on submersible portable radios
Replies: 12
Views: 851

Re: Ideas on submersible portable radios

It might be a bit of an unknown here and I'm not sure what outlets they have in the USA, but here in the UK we use Entel HT700 radios which are fully submersible IP68 rating. They are also available in five bands from 30Mhz through to 530Mhz. The UK fire services have ordered over 15,000 of these af...
by citylink_uk
Tue Oct 21, 2008 4:07 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Radio to PC interface?
Replies: 2
Views: 329

Re: Radio to PC interface?

Thanks for confirming that it can be done. Does anyone have any details on interfaces etc?
by citylink_uk
Tue Oct 21, 2008 8:50 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Radio to PC interface?
Replies: 2
Views: 329

Radio to PC interface?

Hi all,

I'm looking at trying to link a PC into a GM300 to use a tone generator and Headset. Does anyone know if this is possible and what kind of hardware I would need?

Thanks,
Rich
by citylink_uk
Tue Jun 17, 2008 12:56 pm
Forum: Radio Programming
Topic: CM series programming cable
Replies: 5
Views: 962

Re: CM series programming cable

Thanks for the advice.

My friend lent me his ribless cable and that's worked for the program this time.
by citylink_uk
Mon Jun 09, 2008 9:25 am
Forum: Radio Programming
Topic: CM series prog problems..yes i've used search!
Replies: 3
Views: 576

Re: CM series prog problems..yes i've used search!

Hi, thanks

What else will I need to update the Firmware? I've currently got the R05.05 CPS.
by citylink_uk
Mon Jun 09, 2008 3:42 am
Forum: Radio Programming
Topic: CM series prog problems..yes i've used search!
Replies: 3
Views: 576

CM series prog problems..yes i've used search!

Hello, I've just got in two CM series mobile radios that I need to get up and running. Unfortunately someone has password protected the CPS when you try and read the radio. I've found articles in the search but none of them seemed to solve the problem. Hex editor was mentioned but the string about g...
by citylink_uk
Fri May 16, 2008 5:15 am
Forum: Radio Programming
Topic: CM series programming cable
Replies: 5
Views: 962

Re: CM series programming cable

Ok thanks,

Rich
by citylink_uk
Wed May 14, 2008 11:18 pm
Forum: Radio Programming
Topic: CM series programming cable
Replies: 5
Views: 962

CM series programming cable

Hi all,

I've tried to read my CM140 radio from a multi-cable but I just an "Error 512" message.

Is there a specific cable needed for programming?

Thanks
by citylink_uk
Sun May 11, 2008 5:22 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Is this Euro PS spkr/mic compatible with an XTS radio?
Replies: 14
Views: 1280

Re: Is this Euro PS spkr/mic compatible with an XTS radio?

I had a few NOS ones a couple years ago. They were pretty neat, but I "modded" (aka removed the RF pins and metal plunger) so that it could be used as a regular RSM. They looked cool, but I recall that the coil cord screwed with the RF. I think I gave one of mine to Seth. Most that were d...
by citylink_uk
Tue May 06, 2008 3:06 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Is this Euro PS spkr/mic compatible with an XTS radio?
Replies: 14
Views: 1280

Re: Is this Euro PS spkr/mic compatible with an XTS radio?

FireCpt809 wrote:Alex,

I think I saw something about that with the coil cord. The Brits used these for years. I dont know why M didn't offer that style here.


We've had these for a long time now they were issued along with the MT6000E's & MTS2000's in the mid 90's. They seem to work well.

Rich
(uk)
by citylink_uk
Tue Apr 08, 2008 4:05 pm
Forum: Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
Topic: XTS4000 Availability
Replies: 42
Views: 2853

Re: XTS4000 Availability

I still see some of them (at least from pics) with those oddball jedi speaker mic. I guess not EVERYONE has went TETRA yet across the pond? ALL England, Wales & Scotland Police are on the national TETRA system, including the Met Police in London. Those Jedi Mics with the UHF antennas were for t...
by citylink_uk
Wed Apr 02, 2008 9:33 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: What Moto Radio is this? (European?)
Replies: 6
Views: 803

Re: What Moto Radio is this? (European?)

Yes as long as its authorised to roam onto that network. The good thing about the Europe Public Safety band is that ALL TETRA users are on the same frequency bands enabling roaming if it was ever needed accross a massive scale. Most non Europe TETRA users also user this band for PS comms. We use the...
by citylink_uk
Wed Apr 02, 2008 9:11 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: MTS2k..what can you tell me about this?
Replies: 11
Views: 490

Re: MTS2k..what can you tell me about this?

Hi 'fire32njetta' , what country are you in?

Reason I ask is that there are have been a few MTS2000's in VHF around at the moment with that flashcode in the UK market.

I've got a Model 1 version in 99% condition (Reserve issue I think) and I use R02.00.01 Windows and it programs fine.
by citylink_uk
Sat Jan 26, 2008 4:27 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Motorola HT750/GP340 charger?
Replies: 0
Views: 191

Motorola HT750/GP340 charger?

Hi all, I've just bought a Motorola GP340 recently and wondered if the charger that came with it is the right one for the battery. The batteries I have are both Lithium-Ion. One number HNN9013CR and one HNN9013B and the charger has the number HNN9000B on it. Don't want to put the batteries on the wr...
by citylink_uk
Sun Dec 16, 2007 11:07 am
Forum: Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
Topic: Li-ion XTS2500 Batteries? Slim line?
Replies: 17
Views: 1084

Re: Li-ion XTS2500 Batteries? Slim line?

Anyone heard anything on Li-ion batteries being released for the XTS2500?

Rich
by citylink_uk
Fri Oct 12, 2007 3:19 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: TETRA handset question
Replies: 4
Views: 524

Re: TETRA handset question

Hi,

This might be what you are looking for:

http://www.selex-comms.com/en/wp-content/uploads/2006/12/PumaT3_English.pdf

Seems 50 conventional channels are available with CTCSS, no mention of DCS.

Rich
by citylink_uk
Sun Sep 02, 2007 4:16 pm
Forum: Base Stations, Repeaters, General Infrastructure
Topic: Low Band Trunking (ASTRO)?
Replies: 13
Views: 890

Re: Low Band Trunking (ASTRO)?

Hi, In the late 1980's the French national military police setup a national TETRAPOL system called RUBIS installed that ran in the 80mhz region which is classed as lowband in Europe earning it the title of the first national digital network in the world. Indeed it it still operating today and has ju...
by citylink_uk
Wed Sep 27, 2006 8:43 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Motorola P210 model number?
Replies: 2
Views: 504

Thanks

Richard
by citylink_uk
Thu Sep 21, 2006 7:22 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Motorola P210 model number?
Replies: 2
Views: 504

Motorola P210 model number?

Hi all.

Can someone give me the breakdown of the Model number for this Motorola P210.? MDH43RFU9580


Also for a Ht800 Model number MDH43SNU9520

Thanks
rich

Go to advanced search