Batboard

citylink_uk

This is not a definitive answer, but I would suspect the radio is first expecting to receive an active talk unit or group ID from the outbound channel of the DMR infrastructure, and the software times out after 3 seconds of 'DMR network not found.' You say that your radio is programmed on simplex o...

citylink_uk

Hi all, I have a DM4400e mobile that I have reprogrammed in the past with no issues, however after making some channel changes it now has an odd issue in DMR mode only. The radio is only programmed with simplex channels but when I key up the LED TX light comes on and then after three seconds I get t...

citylink_uk

when the setting is enabled the radio will be monitoring the channel in CSQ when the mic is not hung up. try grounding the clip on the back of the mic and see if your problem goes away. I will also see if I can find were in the cps the setting is. let me know what you find out I appreciate your hel...

citylink_uk

Rich, Can you tell us a little more about your problem? by ignore do you mean it does not unmute? or does it unmute for everything? perhaps it is monitor when mic off hook setting? Basically it will unmute on any signal received, rather than unmute on receipt of the CTCSS tone. Not sure about the m...

citylink_uk

Hello all,

I have a CM series mobile that seems to ignore all programming for PL/DPL on RX.

Does anyone have any experience of this or any advice?

Thanks.
Rich

citylink_uk

The only ones I can change are #3,4,8,9,12,14.

Of those all are set to disabled apart from.

RX Radio - Pin 8 : Car Audio Mute
TX Radio - Pin 8 : Voice PTT

citylink_uk

Also noticed that the radio will only pass audio when VOX is ticked in the personality.

citylink_uk

I'm setting up a small repeater using two CM360 mobiles, using one of those cheap ebay cables to connect the radios. The setup does "work", but there is an issue. The TX radio transmits audio from the RX, but is only TX'ing when audio is received and not on receipt of the carrier. If I sto...

citylink_uk

I have a Eurobase repeater that has a controller marked M1000. I'm looking for info on how to program the repeater hangtime.

It's the same unit as show here >

But with M1000 in place of the Motorola logo.

Can anyone assist?
Thanks
Rich

citylink_uk

wiscomm wrote:(sorry if off-topic)

Looks like Harris will be entering the DMR (TRBO) market with the new "Momentum" line, which appears to be made by Hytera.

http://www.pspc.harris.com/solution/momentum.asp

Announcement due at IWCE 2012 in February.

Craig

Isn't this just rebadged Hytera kit?....

citylink_uk

http://www.vertexstandard.com/lmr/Digital

There for all to see now...

citylink_uk

Hi, I don't actually have the M2100 RSS at the moment, but i'm looking for it.

Rich

citylink_uk

I guess I'll have to try and find a later version of the CPS then, as I only have 2.00.01

It looks like someone may have either re-cased or re flashed it. It has the typical MTS2000 label, but with ABC toggle and a two position rotary switch.

Thanks,
Rich

citylink_uk

Looking at the label, I think this may be a Spanish or Portuguese radio.

Uploaded with ImageShack.us

Service info says: 826400 7x01 H01RDD9AN5AN 432IXW2734 - As the model numbers don't match, perhaps it's been reflashed?

Thanks,
Rich

citylink_uk

Is there any way to tell without actually reading the radio? I can get it to show the Service info on the top display, but not sure what i'd be looking for.

Sorry, it's been a while since I last looked at an MTS!

Thanks,
Rich

citylink_uk

Hi all,

I'm getting a "Error reading from image when attempting to unpack unblock Radio Wide Unpack failed" when trying to read the radio. I'm using R02.00.01.

Does anyone know what this is?

Thanks,
Rich

citylink_uk

Vertex will be releasing TDMA radios late 2010. Press release : http://www.prnewswire.com/news-releases/vertex-standard-announces-digital-radio-launch-plans-87114862.html Not MotoTRBO, but still two-slot TDMA to the ESTI standard. In theory they should be interoperable with MotoTRBO and other manufa...

citylink_uk

It might be a bit of an unknown here and I'm not sure what outlets they have in the USA, but here in the UK we use Entel HT700 radios which are fully submersible IP68 rating. They are also available in five bands from 30Mhz through to 530Mhz. The UK fire services have ordered over 15,000 of these af...

citylink_uk

Thanks for confirming that it can be done. Does anyone have any details on interfaces etc?

citylink_uk

Hi all,

I'm looking at trying to link a PC into a GM300 to use a tone generator and Headset. Does anyone know if this is possible and what kind of hardware I would need?

Thanks,
Rich

citylink_uk

http://nexedge.kenwood.com/

That should give you some info.

Rich

citylink_uk

Thanks for the advice.

My friend lent me his ribless cable and that's worked for the program this time.

citylink_uk

Hi, thanks

What else will I need to update the Firmware? I've currently got the R05.05 CPS.

citylink_uk

Hello, I've just got in two CM series mobile radios that I need to get up and running. Unfortunately someone has password protected the CPS when you try and read the radio. I've found articles in the search but none of them seemed to solve the problem. Hex editor was mentioned but the string about g...

citylink_uk

Ok thanks,

Rich

citylink_uk

Hi all,

I've tried to read my CM140 radio from a multi-cable but I just an "Error 512" message.

Is there a specific cable needed for programming?

Thanks

citylink_uk

I had a few NOS ones a couple years ago. They were pretty neat, but I "modded" (aka removed the RF pins and metal plunger) so that it could be used as a regular RSM. They looked cool, but I recall that the coil cord screwed with the RF. I think I gave one of mine to Seth. Most that were d...

citylink_uk

FireCpt809 wrote:Alex,

I think I saw something about that with the coil cord. The Brits used these for years. I dont know why M didn't offer that style here.

We've had these for a long time now they were issued along with the MT6000E's & MTS2000's in the mid 90's. They seem to work well.

Rich
(uk)

citylink_uk

I still see some of them (at least from pics) with those oddball jedi speaker mic. I guess not EVERYONE has went TETRA yet across the pond? ALL England, Wales & Scotland Police are on the national TETRA system, including the Met Police in London. Those Jedi Mics with the UHF antennas were for t...

citylink_uk

Yes as long as its authorised to roam onto that network. The good thing about the Europe Public Safety band is that ALL TETRA users are on the same frequency bands enabling roaming if it was ever needed accross a massive scale. Most non Europe TETRA users also user this band for PS comms. We use the...

citylink_uk

Hi 'fire32njetta' , what country are you in?

Reason I ask is that there are have been a few MTS2000's in VHF around at the moment with that flashcode in the UK market.

I've got a Model 1 version in 99% condition (Reserve issue I think) and I use R02.00.01 Windows and it programs fine.

citylink_uk

A very good and free program:

http://www.cplus.org/rmw/english1.html

citylink_uk

Hi all, I've just bought a Motorola GP340 recently and wondered if the charger that came with it is the right one for the battery. The batteries I have are both Lithium-Ion. One number HNN9013CR and one HNN9013B and the charger has the number HNN9000B on it. Don't want to put the batteries on the wr...

citylink_uk

Anyone heard anything on Li-ion batteries being released for the XTS2500?

Rich

citylink_uk

Hi,

This might be what you are looking for:

http://www.selex-comms.com/en/wp-conten ... nglish.pdf

Seems 50 conventional channels are available with CTCSS, no mention of DCS.

Rich

citylink_uk

Hi, In the late 1980's the French national military police setup a national TETRAPOL system called RUBIS installed that ran in the 80mhz region which is classed as lowband in Europe earning it the title of the first national digital network in the world. Indeed it it still operating today and has ju...

citylink_uk

Thanks

Richard

citylink_uk

Hi all.

Can someone give me the breakdown of the Model number for this Motorola P210.? MDH43RFU9580

Also for a Ht800 Model number MDH43SNU9520

Thanks
rich

Search found 38 matches

Re: DM4400e mobile 3 second TX delay on keyup?

DM4400e mobile 3 second TX delay on keyup?

Re: CM series ignores PL/DPL

Re: CM series ignores PL/DPL

CM series ignores PL/DPL

Re: CM360 as repeater - pin problem?

Re: CM360 as repeater - pin problem?

CM360 as repeater - pin problem?

Eurobase M1000 controller?

Re: Harris enters DMR/TRBO market

Re: Vertex MotoTrbo radios

Re: MTS2000 - Error when reading

Re: MTS2000 - Error when reading

Re: MTS2000 - Error when reading

Re: MTS2000 - Error when reading

MTS2000 - Error when reading

Re: Vertex MotoTrbo radios

Re: Ideas on submersible portable radios

Re: Radio to PC interface?

Radio to PC interface?

Re: New System, Mototrbo, nexedge ????

Re: CM series programming cable

Re: CM series prog problems..yes i've used search!

CM series prog problems..yes i've used search!

Re: CM series programming cable

CM series programming cable

Re: Is this Euro PS spkr/mic compatible with an XTS radio?

Re: Is this Euro PS spkr/mic compatible with an XTS radio?

Re: XTS4000 Availability

Re: What Moto Radio is this? (European?)

Re: MTS2k..what can you tell me about this?

Re: Calculating radio tx range ?

Motorola HT750/GP340 charger?

Re: Li-ion XTS2500 Batteries? Slim line?

Re: TETRA handset question

Re: Low Band Trunking (ASTRO)?

Motorola P210 model number?