Batboard

gopher

Has anyone tried loading windows 10 on a 810? Driver issues?

gopher

I have a bunch of mw810s that randomly change the boot order causing the unit not to boot. Normally we have "windows boot manager" as the first device, but sometimes, we get the physical hard drive is the first device, causing a "no boot device found" Its a quick and easy fix, bu...

gopher

That's why i assumed it was a bad board, most devices the mac address is burned into the hardware.. Looks like Motorola does it via software..

gopher

I bought it knowing the Bluetooth didn't work, was hoping It was just a faulty module...

gopher

Hi Guys,
Is it possible to do a firmware flash on the Bluetooth option board? My board is showing all 00s for the board serial, BT hw address, and Wi-Fi address.. If not, suggestions on how to go about getting a replacement?

gopher

confirmed - its hashed with SHA256 ..

gopher

i have a few outdoor metal equipment enclosures loaded with computers. we keep them from freezing by installing ceramic heater like these. they screw in to a normal ceramic light bulb socket http://www.tempco.com/Catalog/Section%207-pdf/Edison%20Bulb.pdf its on a themostat so it shuts off when its u...

gopher

On the portables, there is 1 wire dallas chip in the cable that tells the radio "hello im a cable" Not sure how your cable is, sounds like maybe your has the same thing? not sure. You can chop the end off a USB cable and crimp this connector on it and you got a 5 dollar mobile / repeater p...

gopher

wont work. The trbo CPS communicates with the radio via a usb rndis network adapter

gopher

If you use Capacity plus in your radio You CAN request and get a Capacity plus compliant ID (<65535) from the DMR-MARC. Just put it in the comments that your a radio tech and need one.

gopher

or this: http://i.imgur.com/yhr0S.jpg

gopher

There is actually a motorola program u can load on a in car laptop, connect to a GPS Turbo, and map out the actual coverage as u might see on propigation prediction map.

gopher

We have a bi directional patch from a 14 repeater analog network to a 10 repeater DMR network. All done with an asterisk box w/URIx connected to a xpr4550. Works very well. Cost is very cheap / but very DIY solution. There were a few times where there 4550 would not key up due to not getting a chan...

gopher

We have a bi directional patch from a 14 repeater analog network to a 10 repeater DMR network. All done with an asterisk box w/URIx connected to a xpr4550. Works very well. Cost is very cheap / but very DIY solution. There were a few times where there 4550 would not key up due to not getting a chane...

gopher

friends post from another list
"PMKN4012A has been upgraded to PMKN4012B. "A" version will not work with newest radio's like XPR7550. The "B" version is the only cable available now from Motorola."
that really sucks...

gopher

possible 7550 7350 3500 3300 radios are the same radio with different housings?

gopher

I think trunking wins over fpp if u upgrade the firmware.. using newer cps to read write I think your ok

gopher

well i had a few system sabers - but cleared them out - so basically just dos RSS for maxtrac gtx and dos mtsx lab for astro saber and xts3000.

gopher

etsi spec says.. In direct mode, (talkaround )the transmitting MS (mobile station) shall establish the timing reference. Any MS wishing to send RC (reverse channel) signalling back to the source shall synchronize to the forward path and shall base their RC timing on the forward path timing. Once the...

gopher

got old computer goin for old dos serial port CPS.. works great. Would like to install astro saber cps. sys requrements shows windows NT4.0 as minimum. Tried on 95 - no work. I guess this means no 98 or ME. So If i upgrade to NT/2000 i loose my real dos capabilities right?

gopher

rear yes - front no - looking into it now..

gopher

older then dirt - 1.02 i think

gopher

picked up a couple of surplus 4550's. Same cable Same computer one radio read and writes fine. The other never even activates as an active USB device insertion. The service manual for a 4{3,5}80 shows the rear accessory connector USB2 ESD protection diode D4000. https://digitalham.info/pics/usb.PNG ...

gopher

This is straight from the motorola XPR4380 service manual. Funny they mention APCO C4FM in a XPR. "800/900 MHz (851–870, 935–941MHz) Band Receiver Circuitry The receiver is dual-band operating in both the 800 MHz and 900 MHz bands capable of FM, 4-level FSK and APCO C4FM demodulation. It is a d...

gopher

Bank Charger???!!! pics plz? Is the radio ON when you drop it in the charger? if so maybe its only designed to charge the battery when the radio is off to extened the life?? If the radio is OFF - and it still does not light up sounds like a bug. i ended getting this charger http://www.amazon.com/gp/...

gopher

any luck with this? its all one 2 one correlated with a contunity tester. never made one and tested though

gopher

i goofed around with lmr400 /bury flex type stuff for all my ham stuff. I actually liked the bury flex better then the ultraflex. The jacket on the lmr400 ultraflex was horrible. When i did my repeater I ran heliax 1/2, found locally for $1 foot. Will never use anything else for any ham stuff ( exce...

gopher

yeah.. Its got a ton of AA's on the bottom. Im gonna putt it all apart when i get the work area cleaned out..

gopher

so i got a hot deal on a used smart rib - as is no returns. Of course pop in fresh batterys and it does not appear to power up. So.. any on board fuses or caps or anything i should be checking ?

gopher

Anyone?

gopher

long story short - programming cable fell out during write . . now turns on to self test wont get past. How to fix? send to depot? No srec saved. damit. Do have srib though...

gopher

Tried my high power g-tab charger with standard micro USB cable. 2000mah on this bad boy.. will no charge...

gopher

i stand corrected - https://digitalham.info/DMR/CONVVSSIMP.JPG definitely pulsing on and off good question - i just tested and yes it works. put 1 trbo HT in talk around the other on normal. the talkaround HT still hears the repeater transmissions. transmitting simplex on the HT does take both times...

gopher

good question - i just tested and yes it works. put 1 trbo HT in talk around the other on normal. the talkaround HT still hears the repeater transmissions. transmitting simplex on the HT does take both timeslots, but it transmits the same timeslots / group call that you would expect coming from the ...

gopher

from the CPS help - maybe it was an option and was removed - not sure Mode (Front Panel Programming) Configures the level of access for the Front Panel Programming (FPP) operation. The FPP feature lets the user change certain codeplug settings directly from the radio when not having a CPS, e.g. when...

gopher

FPP - EVERYTHING BUT FREQUENCY. not sure why, bug or by design

gopher

No problem... a few more things .. normal 5v USB will not charge. Motorola chager is doing something to the data pins I think. FPP is kinda useless - no way to enter frequency. Might have settings wrong but don't think so. Also every-time a call is received the display back-light turns on. good to s...

gopher

my webhost is having connection issues so if these pics dont load - check back later they will soon just got the sl7550 in the mail - didnt plan on buying this but you know how it goes... a few things first - the radio comes with a belt clip https://digitalham.info/sl7550/small/s_IMG_1240.JPG yeah ...

gopher

Removed by request.

gopher

Does anyone here work for motorola ? If so can they please PM me asap?

gopher

FEB20-21

gopher

not trbo, but looks like the evloution of a HT into a LTE cell phone

gopher

want moar?

gopher

2012-03-08
Dreamhost problems.... pics will back soon as I get to computer

gopher

checking now, its on the looser side, there is a small bit of play in all 3 axis after its locked in. It is however locked it well, not worried about it falling out. My oem moto battery also has play, but its tighter.

gopher

funny this pops up today - I bought the li ion saber battery on amazon for 70$
http://www.amazon.com/BATTERY-PACK-Li-I ... B001DERWTE
heres some pics
https://plus.google.com/photos/11773045 ... 9001653921
Its still charging... hope its good

gopher

or am i just crazy?

gopher

Is it just me or when I hit monitor, the white noise sounds fake / like a looped recording? If I key up a repeater there is a split second that i can hear the real noise before it cuts out.

gopher

done system sabers with a dual Socket 370 pentium III computer

had trouble at first, turned out to be the cables.

gopher

XTS2500, XTS1500, MT1500, PR1500 4meg go up to 9.xx not sure exactly. lots of posts here and on the internets about it

Search found 129 matches