Good afternoon did you ever find any resolution to this? I have a new installed MCC7500 we are having the exact same issue,on the Gold elite we could change the wireline from 4 wire full duplex to 4 wire half duplex and solve the "echo". But as motorola would have it there is no way to configure a ...

Hello all

I am working on a radio system that is using a digitac voter the system is voted at 4 sites all linked via microwave. I am hearing complaints from the field that the audio is lower than the dispatcher. One of the satellite receivers was recently moved from a telco line on to the microwave ...

Yes there is a loop for input. However I need an output to close a relay for an indication that an emergency has been received on the fire ground.
I know this has been done somewhere before I just have to find out how!

Thanks for the reply

Good Evening

I am in need of an output from the 26 pin plug on the APX / Xtl that gives some kind of state change upon RX of an Emergency.

I have everything programed correct and the receiving radio displays Emergency Call when transmitted from a portable. Horn/ Light will not allow a state change ...

Can someone please tell me what is the diference between the black face control head and the grey one on the xtl5000
I know the color is but what else??? I looked for a breakdown chart but was unable to find one.

Thanks

Take a look at David Clark Headsets they may be able to help

You may have to create them on your own. This can be done using a text to speech program and then saving the voice file. Att text to speech comes to mind. Read the help files on your RSS and it will tell you what format the file needs to be in I think it is 8bit mono but not sure.

Thanks

Hello all

I have a astro hhch and was courious to know if they would work on a non astro radio. If so would you have to do anything special to make it work?

Thanks for your time

Hello all,
We have recently upgraded our system to a 2.5 kHz vhf conventional repeated system with 2 satellite receivers and a receiver at the transmitter site. The issue I am having is that we are using a jps snv-12 voter as a voter and also a repeater controller, insomuch as the “voter” uses the ...

Ok Jim we will try and let ya know that sounds like it will work. Most of the buttons were for the scan and I had not set Scan up yet the only button was the Zone and I suspect that it was a default

Thanks

Frederick C Kinder

Hello all

I am having some issues programming the control head buttons on an xtl1500. all of the buttons seem to be grayed out and I can not see the drop down menu.
I suspect that you may have to add them some where but I have no clue where or how. Looked all the normal places and I am using 14.0 ...

The Pager Geek wrote:RAD IPMux-1E

Four 4Wire circuits + 1 ethernet over IP. It will pass tone (including llgt) just fine.

We love em

tpg

I must agree they work great

What rib are you using?
Is it powered by ac or batt?

I had the same prob with one of mcs2k and I shot my codeplug in with a polaris rib and got the same error

FIX: try to shoot the code plug in several times I think it will go Make sure you are using a MOTOROLA RIB BOX WITH A FRESH 9V BATT that ...

Hello all

I am looking at getting my hands on several of theese units and want to make sure that they will work with the p25 system near by

MODEL #H04KDF9PW7AN 146-178 MHz

FlashCode: 010001-000000-8

DSP 104.03. 10

AP_.RO3.10.06

thanks
Fred

try www.jottodesk.com

Fred

ok will it work on an astro saberIII

Thanks Fred

OK thanks to all for the help will try to program it and see how it works

ok is it a form of mdc ?

where would one use it and what for ?

will xts5k decode it?

thanks for your time

Fred

what is tps ?????

thanks
Fred

are you trying ti disable a site if you give me some more info i can try to help

thanks
Fred

you may want to look at www.pyramidcomm.com they have many app notes on many radios and i know that the info is there for the radio side (mcs2k) and you may also be able to put together info for your vxr 1000

Fred

Just a thought is the mic grounded?

Fred

ok thanks just wanted to see if it could be done guess not i will just use the hard drive to arcive the rss(cps) and the files to again to all thanks for your help!!!

FRED

yes that is exactialy what i am trying to do. As I mentioned in the first post the drive has a program called argo for just that reason. It would be nice if it did. The reason that i want to do this is so i dont have to install the programs on all computers just the drive.

Thanks
Fred

tried to move the files no joy any other ideas

thanks
Fred

tried to look for the file on both the main frame and also the portable drive no luck! also cant install from the external drive BUT I can burn a disk form the file on the drive and it will install on the computer and work fine. I think that it is some kind of security by big /\/\ dont know it would ...

Ok here is the deal. I have an Ext. 160gig HD I got an idea to put on it the rss for the xts and several other types of radios. The quantr works fine BUT here is the kicker the HD wants me to run a program called Argo It will emulate the actions of your internal hard disk in the aspects of install ...