I ended up ordering a new usb to cradle cable and It works fine. Either it was a bad serial cable or serial port

I have compared the driver info between the 2 machines and they are the same. The serial port works to program other model radios including other Motorola radios. Still stumped!

Just a quick update, I did clean all the contacts but still no success.

Thank you for your replies, I will clean out the contacts again. It should be noted that the exact same equipment works on the old computer however. I will follow up and post results. Thanks again!

Hello,
I have been using the PPS for the Minitor V for several years and now I have had to upgrade to a different laptop. (Both machines run Win XP) The old Dell, when I can get it to boot, runs the program just fine, but the Panasonic Toughbook will load the software but it will not read the pager ...

Thanks for the input, Bill. The part that still confuses me is the fact that other radios took the exact same codeplug and they work fine! I'm just glad it works now....

Well, the codeplug must have been the problem. I replaced it with a completely unrelated codeplug from another agency and it started working fine. So I just re-wrote the codeplug from the other one. Hope this will help someone out there-

Hello- I have been doing the narrowband programming for the agencies I work for and have had pretty good results. I have done numerous model radios and the only ones I have had trouble with are HT1250 portables. I programmed them with the narrowband codeplug and now it will not transmit correctly. I ...

To test this out, I set my radio (Moto XTS 1500) up with my rescue squad tones in A-B, and the fire dept in C-D. This setup would not alert on the A-B tones. Any ideas?

Also, I was experimenting with adding a repeater input frequency as a channel. I live a few blocks from the dispatch center, and ...

Thanks for your prompt reply. I wondered if that would work, but thought I would ask the experts! Thanks again

Sorry, forgot to mention that! Motorola HT-750/1250, CP-200, XTS-1500

Hello, I am still new to programming features in radios.
From what I have read it looks like you can only have 1 set of QCII tones per channel. Am I missing something or is there a way to have one channel alert on 2 sets of tones.
Example: Someone works for 2 agencies that are dispatched on the ...

Here is what I have for info. I have not flashed this unit, the original flashcode is all it has.

Model:H66KDD9PW5BN
Flashcode:100001-000000-7
DSP: R10.00.00
PSDT: R04.00.00
Firmware: R10.00.01
System Package: Conventional
Any other questions please post and I will get back ASAP.
Thank You.

Hello everyone. I am in charge of the programming of our new radios. We had them programmed by a dealer and they just don't do what we want them to.
We have been using the HT 750's and we like the way they recieve pages from county dispatch. When the HT series radios recieve a page we get: " Beep ...

Hello everyone, sorry it has been so long. I was able to get some info from the radio.
Host: R10.00.01
DSP R10.00.00
Flashcode: 1000001-00000 0-7

Let me know if this helps...

Thanks for your responses. I do not have software yet, the board of directors needs to decide whether or not to purchase.
Also, I have not been able to pull up the flashcode or firmware info. Not sure what I'm doing wrong

Hope you can help me out here.
The Rescue Squad I work for recently purchased 9 new XTS 1500 Mod. 1.5 portables.
They seem to be good radios although they are heavier than the HT series we were used to.
However we have been in contact with the dealer they were purchased from and they have not been ...