I know this was awhile ago, but for anyone else searching. It seems that the APX8000 Motorola went to storing the MACs for the BT and Wifi in the Codeplug. So what is happening is if someone tries to force in a new codeplug without the MAC info it will then show all zeros for the MAC. My ...

I used to do this. only way I could find was to make a new conventional personality with the same frequencies in it.
Then set up a second zone with those frequencies in the same channel position as my "home" zone. Then set up the toggle switch to switch zones.

If the 2 are set up exactly with the ...

Its possible he means encryption keys, but most likely he is talking about the system key. the system key is a file that "unlocks" the programming software to be able to program the radio with that specific systems programming. Do you have authorization to be on their system? If you do not have ...

You have to modify the CPS to engineering mode. then you can make those types of mods to the Pager. The instructions can be found here: http://batboard.batlabs.com/viewtopic.p ... ering+mode

please excuse my ignorance. But I have done what is in this thread. I have downloaded wireshark and read the CP. I have captured the data. BUT I dont see the password.

I am using a radio that I know the password to as to find where it is easily. but i see nothing. PLEASE HELP!!

I need to know ...

I want to share the outcome of this question. in the end i put a m3 keypad on a m2 without changing any s-rec info and this is what i got.
as I suspected the keypad was recognized and the top six buttons worked just as they do on a m2. the only thing that did not work were the numbers, they would ...

here is the keyboard part number:0104007J99. it runs about $23. as far as installation goes, the following is copied from the service manual.

To remove the keypad retainer shield:
a. Insert the tip of a “penknife size,” flat blade screwdriver in the opening at the end of the
keypad retainer arm ...

if the numbers on it do not work i am ok with that.

let me give an example, I have an ht1250 that was a lmtd keypad. I put on the full housing and flipped the switch in CPS to make it full keypad . If i had not flipped that switch in CPS, the regular buttons that are already on a lmtd key would ...

Here's akardam's guide on Model I to Model III conversion from the hardware side. It looks like you're already halfway there starting with an MII.
http://www.akardam.net/moto/docs/xts3k-int-model-1to3-upgrade.html


I have seen the guide, like i said, I have searched high and low and that guide ...

let me start by saying I have searched high and low here, on RR, and on google for an answer to this to no avail. so here it goes. I have a XTS3000 model 2 and i want to recase it. I have a Moto online account but the refurb kit is $418. WOW!!! and i can not buy it in pieces because they will not ...