Search found 9 matches

by ChrisNYC
Tue Apr 24, 2018 5:01 am
Forum: Radio Programming
Topic: Radius M10 - Cant program 16 pin option connector
Replies: 3
Views: 7456

Re: Radius M10 - Cant program 16 pin option connector

This would be the Americas Radius GM300, GR300, M120, M10, M130 R05.00.00 HVN8177A version.
by ChrisNYC
Mon Apr 23, 2018 3:10 pm
Forum: Radio Programming
Topic: Radius M10 - Cant program 16 pin option connector
Replies: 3
Views: 7456

Radius M10 - Cant program 16 pin option connector

I've got a UHF M10 that has the 16 pin option connector but the RSS, (GM300, GR300, M120, M10, M130) Version R05.00.00 doesn't give me the F9 option to program it in the Radio Wide configuration page. Am I using the wrong RSS?
by ChrisNYC
Wed Aug 26, 2015 1:59 pm
Forum: Radio Programming
Topic: Any CPS out of band programming tricks?
Replies: 1
Views: 3159

Any CPS out of band programming tricks?

I was wondering if there are any tricks to program a MTS2000 slightly out of band using CPS. I know the trick for certain versions of RSS by holding down the shift key during frequency entry. I only want to do this to receive a couple of public service frequencies a few megahertz above the 470 meg t...
by ChrisNYC
Sun Aug 02, 2015 5:44 am
Forum: Radio Programming
Topic: MTS2000 CPS on Windows 7 64 Bit????
Replies: 10
Views: 7926

MTS2000 CPS on Windows 7 64 Bit????

Anyone ever get this to work?

Thanks!
by ChrisNYC
Sun Jul 12, 2015 6:24 am
Forum: Radio Programming
Topic: Waris CPS install on Win 7 x64 Help please!!
Replies: 3
Views: 2855

Waris CPS install on Win 7 x64 Help please!!

I'm trying to install CPS (R06.12.05) on a 64 bit Win 7 laptop that has no CD drive, so I'm trying to do so using a USB stick. When I run the setup.exe file it looks like it starts to install, (spinning cursor and lots of hard drive activity), but nothing happens. No CPS splash screen - nothing. Do ...
by ChrisNYC
Wed May 28, 2008 3:33 am
Forum: Base Stations, Repeaters, General Infrastructure
Topic: Recommendation for indoor repeater antenna
Replies: 7
Views: 1249

Re: Recommendation for indoor repeater antenna

I believe the FB2450 is metal with ground radials and a coil wound in the middle of the radiator. At least that's what it looks like in Larsen's literature: http://www.larsen-antennas.com/docfiles/ASB9/BaseStationAntennas.pdf Very poor antenna choice for a repeater. Thanks for the heads up, Will. C...
by ChrisNYC
Tue May 27, 2008 4:05 pm
Forum: Base Stations, Repeaters, General Infrastructure
Topic: Recommendation for indoor repeater antenna
Replies: 7
Views: 1249

Re: Recommendation for indoor repeater antenna

. One potential antenna is a Larsen FB2450 which is a 32" high base station model that would fit in the ceiling space. . Most if not all of these type of fiberglass 'base station' antennas have a small diameter steel wire inside them much the same as a mobile so-called gain antenna. No advanta...
by ChrisNYC
Sat May 24, 2008 6:11 am
Forum: Base Stations, Repeaters, General Infrastructure
Topic: Recommendation for indoor repeater antenna
Replies: 7
Views: 1249

Recommendation for indoor repeater antenna

Does anyone have a recommendation for a UHF (460mhz) antenna that could be used inside a 200,000 SF 3 story building? I'm looking for something that I would be able to install in a suspended ceiling. For reference, a 3db gain collinear mag mount mobile antenna almost does the job with a few marginal...
by ChrisNYC
Fri May 23, 2008 11:23 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Need help with GR500 16 pin accessory connector
Replies: 1
Views: 506

Need help with GR500 16 pin accessory connector

I'm in the process of interfacing a GR500 / R1225 repeater to a hard line Telex intercom system using the 16 pin connector. The intercom uses balanced audio both ways and has a relay closure to key the radio. I wont be needing the COR. I have most of it figured out, but am confused as to which audio...

Go to advanced search