Batboard

EM-01

I am having the EXACT same issue. Need to get these walkies programmed for a local volunteer Fire Department soon. Did you ever get an answer for this problem?

EM-01

Trying to find a wiring scheme to put an XTL5000 on a RICK with a MOTOtrbo VHF in Bidirectional Crossband. Needing an easy to join a talkgroup to a VHF Digital Channel for Interoperability. Not even sure if a RICK can do Bidirectional Crossband. Any ideas, wiring scheme's I dont have the manual for ...

EM-01

Yes I have hot keypad checked. And I have not tried button test mode. How do I do that? Interesting.

I don't have any other HT1250's to read a codeplug from but I will ask around. Sounds like a darn good idea to try.

EM-01

The radio Firmware is R05.07.01

The software is R06.12.05

The Radio is not an LS and the codeplug I know is not. I still have not had any luck. I am starting to think it has some internal problems.

But it transmits and receives just fine. I just cant change zones.

EM-01

Howdy All, recently obtained a used HT1250 VHF full front keypad, and I seem to have a menu access problem. I can program the side buttons just fine BUT. The P1 P2 and P3 buttons seem to revert just one setting (usually system scan or zone) and when I hit the menu button I only get one option (Syste...

EM-01

Well that is something I my do in the future when I have time. But I already have the new radio and I am trying to get it into service. Has anyone ever tried the same model codeplug clone theory? I wonder if that would work?

EM-01

I dont suppose I could get a codeplug that was similar to clone into it?

EM-01

Capacitor corrosion

EM-01

I have recently purchased a Spectra VHF Model T83FWA7HA9AK to replace a downed T83GXA7HA9Ak and the new one is looking for the 9000e head and my setup is for an A7 head. Is there a workaround so that I can pull the codeplug from the new radio without connecting a A9 or 9000e head up to it to read? W...

EM-01

Hello All,

Does anyone have a Manual for a Zetron Mod 37 controller that they can E-Mail me?

Thanks in advance.

EM-01

By the Way, you will need the SP rss for the control head. Once I reprogrammed the drawer with regular rss the control head threw out a strange error code. I'm still researching it.

EM-01

Well here are an entore LOT of the exact same radio on Ebay.

http://cgi.ebay.com/Radio-Two-Way-ct-32 ... dZViewItem

If you can afford it.

EM-01

Hello All,

It was purchased off of Ebay by a friend of mine from the following:

Heather Kane
108 Riblen Rd
Chehalis, WA 98532

I'll see if I can find out the Ebay usename.

EM-01

I am actually thinking of a similar operation that Washington was using it for. If I were to put a 2 channel maxtrac (or somthing similar) in the trunk, programmed to my dispatch's freq, hook the mini-uhf connetion to that radio, run an external speaker to the inside of the car and I could hear my d...

EM-01

Hello Again Everyone, I had to deliver the entire radio to the equipment shop today so it could be installed in the new car. So I wont be able to attempt to program the control head. The car could be ready tomorrow so I can attempt it this weekend. I will let you all know as soon as I have the resul...

EM-01

Thanks HumHead, That was the thread I was needing and I Qoute: This sounds an awful lot like the dual-key mics that Motorola put together for us (WA State Patrol). The 'D' side is likely short for 'Direct' and the 'R' side for 'Repeater.' The way it works in our cars is that they have a Syntor X9000...

EM-01

UPDATE**********

I found a Service Record Card inside the radio from the WASHINGTON STATE PATROL. Last Serviced 9-9-1996

Maybee I should give them a Call.

EM-01

Here are the Pic Links:

http://pages.sbcglobal.net/kd5fmu/Image007.jpg

http://pages.sbcglobal.net/kd5fmu/Image008.jpg

http://pages.sbcglobal.net/kd5fmu/Image009.jpg

http://pages.sbcglobal.net/kd5fmu/Image011.jpg

Tell me what you think.

EM-01

There is a small thread to this radio. http://batboard.batlabs.com/viewtopic.php?t=56254&highlight=x9000 But no much info. The Radio Drawer itself has no SP number whatsoever. With that said on the rear of the control head there is the model number HCN1073A and under that is SP03. Is this any he...

EM-01

No Camera available but, The cable from the Mini-UHF runs to a circuit just to the rear of where the EEPROM chips are located and that area looks a little different from my other Syntor x9000.

EM-01

I need help Identifying a Syntor X 9000 Radio. Mod# T73KEJ7J04AK I know how to decode this number it is the Chassis nuymber I cany figure out # YUD1033A and get this the Drawer unit has two antenna connectors one mini uhf and one SO-239 both appear factory installed and the mic PTT button is a two p...

EM-01

Hey Thanks Guys, This is a Big Help. I Appreciate Everything.

EM-01

EM-01

Hello All.

Does Anyone have the part number for the lens of the Control head of a Maratrac HCN1089A or HCN1090A ?

I need to order a new one and can not find the part number.

Thanks

EM-01

I looked in the RSS for the Zone A/B feature and I guess I'm not seeing it. Can you explain where exactly.

EM-01

Hello All. I have my clamshell head Maratrac up and running, but I was wanting to know how to change the scan on/off switch to a zone A/B swith if possible and Can the Talkaround feature be used with the Clamshell head? if so how is it done? Also is there a nusicene channel delete in the scan mode? ...

EM-01

Thanks for the Reply Guys. I really appreciate this board.

God Bless

EM-01

Hello Everyone.

I have a Maratrac VHF hi band with the A3 (Clamshell HEad) that I recently acquired. I need to know about the two wires from the head (pins 19 and 20) are they both 12 volts+ like the A7 heads or what?

Any and all help appreciated.

EM-01

EUREKA!!!!!!!!!!!!!

IT WORKS!!!!!!!!!!

It is apparently a -3. I switch the red to borwn for mic Hi and it works perfectly.

This is just Awesome.

Thank You all for the help!!!

EM-01

Well I connected Mic Low and the shield/ground together at the mic but still the same thing. I checked the Syntor X 9000 pinout and did not find a suitable equivelent. I don't suppose anyone out there would have a schematic for the TMN1000a Desk Mic. I really would like for this to work. What better...

EM-01

Well I'm trying to make this work on a Syntor X9000 and I actually got it to key the radio but no audio. The PTT and Mic Hi and Mic Lo are the three I connected but I dont want to fry the radio by taking a chance on the other wires.

Anyone have any suggestions?

EM-01

Thank You, you are a lifesaver.

I just now got the message because the Post E-Mail notification did not come through.

Thank YOU!!!
Thank YOU!!!
Thank YOU!!!
Thank YOU!!!
Thank YOU!!!
Thank YOU!!!

EM-01

Hello One and All.

I am in the middle of a project and need the pinout for a TMN1000a Motorola Desk Mic. It's the old Motorola vintage desk mic that looks like a mobile mic on a stand.

Can anyone Help me with this pinout?

Thanks

EM-01

Hello All,

Will a DES XL module accept a key from a DES Keyloader? And will it work?

Thank You.

EM-01

Here is the link, But it is not the Alkaline it's the Ni-Cad

http://www.portablepower.com/Productpag ... m=33T174N3

Sorry for the Delay

EM-01

Thanks jnglmassiv,

Your info helped me find the cheapest price on the battery I have seen yet. I already placed the order.

EM-01

Thanks Dennis

EM-01

Sorry for the Delay,

That was it I tried with a Friends good PA midule and it worked great and does not drain the battery now.

Now does anyone have a good PA module for a VHF they would like to sell?

Thanks

EM-01

Hello All,

I need the partnumber or the compatable battery for the saber keyloader. Anyone know?

Thanks

EM-01

Thanks Guys, I'll check the PA and get back to you tomorrow.

EM-01

I haven't really noticed but I will check now that you mention it.

EM-01

Hello All. I neep help with a Saber I H43QXN7139CN Vhf. With a fully charged battery it only transmits a few watts and just sitting idle it will drain the battery in a short time, 30 mins or so. Could someone give me some more insight on what particular module might be bad, or if it;s a motherboard ...

EM-01

I know what he says it is, But It sure doesn't look like one. Just look for yourself.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 42528&rd=1

EM-01

I have not logged on in many months, Feeling quilty I came back these past few weeks for tidbits here and there. I knew Something just wasn't the same. Then I found this Thread. I can't beleive it. Monty was the one who always took time to help me out with my little problems, and with no discomfurt ...

EM-01

my 386/25 has the option to go to "slow" as well in the bios, comes in handy as i HAVE to slow it down for x9000s and MCX1000s. love the 386 platform for DOS programming, the only thing is that the astro Rss takes forever.. small price to pay. I have an old Grid 386/25 and it still needs ...

EM-01

Hello Everyone, I have an aquatence that has a Spectra with the A5 head mod #D44KXA7JA5BK and it will only program 22 channels and when he tries to increase the amount of channels the rss tells him "value outside the range for this model. Please refer to the service manual" Can you tell me...

EM-01

Thanks again Vern,

invaluable information.

EM-01

One More Question,

The three way switch on the back. I realize one position is OFF but what exactly are the other two? the markings (if there was any) are not there.

Thanks Again.

EM-01

Thanks Vern,

I very much appreciate the information.

Gotta Love Batlabs

EM-01

Hello All,

I have a Moden 100 encoder and it says under it that it is tone group 3. My question is witch buttons are witch tone freq's?

Any and all help is appreciated.

Thanks

Search found 120 matches