Batboard

ScannerDan

Thank you..

ScannerDan

No one??

ScannerDan

https://www.govplanet.com/jsp/s/item/45 ... ay1-020221

ScannerDan

What is the most current version of the Quantar RSS??

ScannerDan

Thank you for your reply

ScannerDan

So what exactly is the Q445: Fireground Accountability Software used for in a XTS5000 radio?

ScannerDan

Good Day, Is there an “OFFICIAL” Motorola publication on the programming and operation of Audible Channel Announcement on a XTS5000 radio?

ScannerDan

Not sure about the Astro Saber however every XTS surveillance adapter that I have used I was able to blow code into the radio with my KVL. I'm sure that it should work for your needs

ScannerDan

They should already work to load keys as is.

ScannerDan

Hmmm, Thank you

ScannerDan

I keep seeing the reference to MACE and R-revision firmware on eBay ads for APX radios. Can someone explain what that is?

ScannerDan

Andy,

Did you get your issue resolved?

ScannerDan

Good Morning all, Could someone post a simplified way of entering a DES-OFB key into a T3011DX KVL? I have a copy of the T3011DX instruction manual but I'm not really understanding how to enter keys in the KVL. I don't need "Shadow Keys" just a plain old single key. I looked on YouTube and...

ScannerDan

RFguy wrote:
ScannerDan wrote:I didn't know that the XTVS's had a fan.. Well at least mine does not have a fan.
I think OP was referring to the fan in his bench power supply was still running (IMPRES battery backfeeding).

OK got it thanks

ScannerDan

I didn't know that the XTVS's had a fan.. Well at least mine does not have a fan.

ScannerDan

Morning,

I was wondering if a XTS5000 2 can be modified to a 3 by switching out the keypad and external case ? I'm sure it's not that ease like the old ASTRO Sabers were.

ScannerDan

Good Morning

What was the last version of CPS for the HT1250??

Thanks

ScannerDan

I just looked at the portal it's ok I did like yours better.

ScannerDan

PMLN4958 is the mic extension cable. You will also need the PMLN4959 accessory cable as well to provide ignition sense and speaker leads. All you have to do is make sure you program the appropriate buttons and plug it in on a mid power brick. I just wanted to confirm that the XTL5000 "Rear Ign...

ScannerDan

Thank you so much..

ScannerDan

I have a mid power XTL5000 with a remote mount O5 control head. I would like to swap it for a remote mount O3 handheld control head. My question is how difficult is it and what is the Motorola part number for the O3 control head extension cable ?

ScannerDan

What happened to all the programs??

ScannerDan

so what programs are being used to generate DES and AES-256 keys? I have an old 2007 copy of "Syntrx" cryptokeygenerator but I was wondering what departments and others are using.

ScannerDan

Sounds like an issue with the lapel mic. Did you by chance remove it to see if the problem goes away?

ScannerDan

It's easier to think of APX radios as very broadbanded single-band radios rather than true dual-band radios. For one thing dual concurrent RX isn't supported, and you can't do cross-band repeat. You can, however, mix and match frequencies in any configuration you can think of, including TX on one b...

ScannerDan

jmr061 wrote:http://www.akardam.net/moto/tools/

Thank you for providing the proper decoder ring link..

ScannerDan

Care to comment on this APX 7500 flashcode? 985358-011690-2 Q806/G806 IMBE / APCO-25 Digital Operation H15/H44 H15 is Astro Data / H44 is VRM500 for MCS2000 only H868/W298 Conventional Multikey and Analog Conventional MDC OTAR G170/H43 Remote Monitor and Radio Trace H45 Smartnet Trunking Type I H39 ...

ScannerDan

[/quote] There is no "switching". It's automatic. When you change channels, you can change to any UHF or VHF frequency/personality. You can also have UHF and VHF personalities in a given scan list.[/quote] So each personality/zone can be a combination of Uhf and Vhf frequencies? I will hav...

ScannerDan

My agency has dual band, Uhf, Vhf, APX 7500 with O5 control head and advanced microphone installed in the vehicles, however no one seems to know how to switch between the two bands. UHF is our primary frequency while Vhf is used for mutual aid. I have read through the APX™ Mobile Radio User Guide an...

ScannerDan

Thank you for the post it was helpful..

ScannerDan

Good Day all,

Does anyone know the Motorola Mdl number to convert a MX radio or KVL T3011DX to use the Saber batteries? I think they were called MX-Saber battery adapter.

Thank you

ScannerDan

Good Day all, I recently installed a current copy of the APX CPS and need a codeplug so that I can practice using the CPS before I attempt to read or program my APX radio (which I'm waiting on) It doesn't matter that frequencies the plug is o, however I would prefer a mobile plug. I just need one so...

ScannerDan

No one?? For I have been wondering about this also.

ScannerDan

I believe that the unit has a ignition sense wire but I can live with not turning off the radio from the control head. Thank you for your reply

ScannerDan

Is it possible to remote mount a NTN1606 XTS Vehicular Adapter in the trunk and then use cat 5 cable to wire the MOTOROLA PLN7737B HANDHELD CONTROL HEAD and speaker into the cab of the vehicle?

ScannerDan

Thank you problem resolved

ScannerDan

No I do not have any signaling enabled for this is a receive only personality with CSQ on the receive frequency.

ScannerDan

No One??

ScannerDan

Hi all, I’m having a unique issue with a UHF XTS3000, II. When the unit is ON scan it will decode audio perfectly however, when I turn the scan off the radio will not decode audio. The two analog personalities are set up as receive only, carrier receive squelch, 2.5 kHz narrow band. I tried all thre...

ScannerDan

MTS2000des wrote:It hasn't gone anywhere, it's now known as Communications Support forum:

http://communications.support/forum.php

That's why I kept getting an error for I had it bookmarked under the old name

ScannerDan

Does anyone know what happened to the (www.p25.ca/forum.php ) forum???

ScannerDan

MTS2000 wrote: A fellow board member has it right now doing a Firmware and Flashcode update.

I need to have my XTS3000 firmware updated who are you using and what are they charging per firmware upgrade>

ScannerDan

HKN6155 Serial Port (RS232) Programming / FLASHport Cable ASTRO Spectra Plus CPS HKN6183 GCAI RS232 Program/ Flashport Cable Programming Mid or High Power Radios through control head or TIB GCAI connector on transceiver. HKN6184 GCAI USB Program/ Flashport Cable Programming Mid or High Power Radios...

ScannerDan

escomm wrote:You are not using the programming cable, you're using the data cable. You need either HKN6160 for RS232 or HKN6163 for USB. HTH

Thank you..

ScannerDan

I still need clarifications on which is the proper programming cable for this thing. I guess it depends on which radio interface connector you want to use. On the mid power radios, you have access to the USB connections directly on the rear accessory connector. This is the cable that I have made up...

ScannerDan

The XTS lines portable radios will be cancelled as of November 30, 2013, with the last order entry date of October 31, 2013. APX series will replace the line.

ScannerDan

I still need clarifications on which is the proper programming cable for this thing.

ScannerDan

Model No: M20K S S9PW1AN. Low/Mid power, max of 50w. If you've got a W series head remote kit on it, you'll need the HKN6155 Astro Spectra+ / XTL cable. There's rumors you can use one of the HKN616x series data cables to program the radio from the rear connector, but I've never heard of this being ...

ScannerDan

I just checked the configuration of my XTS3000 and sure enough all the personalities were set up for "wide" not narrow band. Changed all TX Deviation to 2.5 KHZ and guess what?? My unit now can hear!!! Thanks all for ur input on the batboard!!!!

ScannerDan

The 2.5KHz did it! It's just a little counter-intuitive that the TX deviation affects to RX side, but I don't care at this point! The reception is a little scratchy in the basement of the building I'm in right now, but that just means it will work even better when I'm outside, considering I wasn't ...

Search found 393 matches