Batboard

RADIO43

wavetar, That is what I was thinking as far as the "Talkgroup" reference part of that pin. I am actually using the MRE RT-2TA Controller which works great. I had read somewhere else about running a lead off one of the speaker leads into the controller since the XPR has DC Voltage on the sp...

RADIO43

Group, I gave up on the Maxtrac for this and was able to acquire a XPR4580. So here is what I would like to do. XPR4580 Smartnet System Talkgroup to a CDM15550 Conventional Channel.... Would like it to be bi-directional repeating and I am using the MRE RT-2TA Controller which work great. So here is ...

RADIO43

Going to resurrect this post from the dead... Looking to do something similar with a 900 Mhz Maxtrac on a Smartnet System and a UHF CDM1550. I have a R.I.C.K. but know now that it will not work. Would like to it to be bi-directional and not just one way. Is there still a solution to doing this? Than...

RADIO43

A little off topic here, but has anyone ever configured a Federal Informer into a Motorola Quantar to trigger PTT and play auto over the air via the audio/relay outputs on back of unit? I believe it is possible, just trying to come up with pins and which connector.

RADIO43

escomm wrote:So what gentleman's club are we going to tonight??

Was at the Harem this afternoon for some adult fun!!!!!

Didn't disappoint.....

RADIO43

joes243 wrote:I am having an issue too. It allows you to add to the cart but you have to purchase at least 5. When I change the quantity to 5 I get another error saying to change it to less than or equal to 4.

That is my issue as well.

RADIO43

Knob is unavailable again......... Just tried to purchase 5 on MOL with no luck.

RADIO43

Thank you sir.... Love when they do that!

RADIO43

escomm,

Any part # for a MUC Adapter for the XPR?

Thank you sir,

radio43

RADIO43

Its been covered extensively in the past - http://batboard.batlabs.com/viewtopic.p ... &hilit=tps

RADIO43

Radio Release Notes – Subscriber Release 7.11.5 Update – April 2012 APX 7000/7000XE/6000/6000XE/6000Li/4000, 7500/6500/6500Li New Version: Host/DSP – R07.00.10, CH – R13.00.01, Secure – R01.02.02 Bluetooth Option Board – R03.00.01 Old Version: Host/DSP – R07.00.05, CH – R13.00.01, Secure – R01.02.02...

RADIO43

Meet me at the "Living Room!"

RADIO43

escomm wrote:Beware this will only work on XX80s with digital flashes. Will not work with SmartNet TRBOs.

I noticed this, very disappointing! I am wondering why though?

RADIO43

I believe they are referring to Conventional Astro Talkgroups vis FPP.

RADIO43

Sold it, so never really got a chance...

RADIO43

Here is what I got back from Motorola when a case was opened:

"Unfortunately we do not offer the thumbscrew as a replacement part, if it helps, I can tell you the thread type is a 4-40 UNC."

RADIO43

Looking for part number for just the thumb screw for the above speaker mic. I believe it is common to all the 7K Mic's and programming cables.

Thank you in advance..

radio43

RADIO43

New Firmware up on MOL.

1 Issue Update / 1 New CPS Feature:

O9 Control Head switch function issue Issue Update
Write Password Protection Feature now supported New CPS Feature

RADIO43

Just to update everyone, a MCS2000 with Startsite option works perfect on a Smartnet System. Thank you to all for the help...

radio43

RADIO43

Quantar with DIU....

RADIO43

Jim,

Totally following you here but it seems interesting that there is a problem with APX7k's and not the XTS3k's and XTS5k's.

RADIO43

Sorry,

Forgot to include that I have Firmware R06 in the radios..

radio43

RADIO43

Group, Running into some issues here. We uses tones over our MCC5500 Console to alert officers to different situations in Conventional P25/IMBE. Right now we are using the straight tone and then the hi-low-hi-low tones which are the standard options on the MC5500 console. Believe its the Alert 1 and...

RADIO43

I read that, just want to make sure. Thank you for update. Anyone using a Startsite Radio on Smartnet?

RADIO43

Have just read a bunch of post and still trying to get an understanding on what a MCS2000 w/ Flashcode of : Decoding Flashcode: 000002-000000-8 Platform: MCS2000 H36: Startsite Operation <A HREF='http://www.akardam.net/moto/tools/decode4.pl'>Decoded by the akardam.net FC Decoder v4</A> Will a MCS200...

RADIO43

Okay.. Got my NNTN8160AS today and when opened up the box, the Manual that came with the board says its the "Bluetooth Option Board (MNUK6000A) Installation. After installing, I have the Bluetooth Icon on the screen but nowhere can I find a place in the CPS Menu to enable the Bluetooth Options....

RADIO43

Took a chance on the NNTN8160AS Board.... Will be here tomorrow, will let you know the results!

RADIO43

Not sure if it uses Region Codes or not, havent played with much other then the band splits to expand the 470 mhz beyond this.

RADIO43

I have an XiR M8268 Mobile with Firmware of R01.05.10 and CP Version 05.01.04

It does not use the US Version of the software.

Not sure this helps you...

RADIO43

Pretty cool.... Any chance of a similar mod on a UHF Astro Spectra?

RADIO43

Would having the radio flashed for Bluetooth and no Bluetooth Board installed in radio generate a "Hardware board absent" when powering on the radio up?

RADIO43

This board is right behind the speaker.

Description on Mol is "Item Number. NNTN8160AS APX PORTABLE OPTION BOARD SVC KIT"

RADIO43

Group, When looking at the Basic Service Manual for a Full Keypad Dual sided APX7000, it makes reference of a "Optional Board Assembly" (Sec 1:8-14 and Sec 1: 8-36) . The board is mounted just above the "Expansion Board Assembly" (Part # MHLN6977_). Is the "Optional Board As...

RADIO43

This was bought off the used market so not all that upset. I will try a call to Motorola and see how that goes..... Hahaha

RADIO43

Group, I have what I believe is an early production HMN4104A Display Speaker Mic for an APX7000 (See picture Below). When hooked up to the APX it gives me the "unsupp usb device" message and "no usb" shows up on the display. When using the channel selector on the mic when connect...

RADIO43

Cool.. Thank you

RADIO43

How about singletone or DTMF Hotkeypad?

RADIO43

Medic12 wrote:Thanks for taking control again batwing.

Do us all a favor and get rid of alex as well. Both of them have far outlived their usefulness.

This place needs the fresh start.

Wow... 84 post and this guy throws that out there?

Come on, we have the board back!!!

RADIO43

Anyone have service manuals around for VHF and UHF Motorola Minitor I's? Basically looking for pages that deal with tuning these old gems.

Thank you in advance,

radio43

RADIO43

res6cue, thank you for info.

Anyone have any luck pulling these boards out of their Band Split values?

I have a few in the 450 to 469.999 mhz range and want to move them up to 476 mhz after getting the proper crystals.

What are my chances?

RADIO43

Does anyone know the different range band splits and how they were divided up with the UHF Minitor I's? I was trying to find a UHF Minitor I Service Manual online but no luck so far.

Any help would be great..

radio43

RADIO43

Update....

Radio B (Dash Mount) with Control Head A will not take a firmware upgrade due to no communication with radio. Tried it numerous times with no luck.

RADIO43

Ok... I tried the procedure you set forth and could not get it out of that mode. I tried it about 5 times and after turning the radio off when Head resets, I turned it back on. At t his point I would get the green screen for about 3 seconds followed by the FL 05-93 code after that. I am going to put...

RADIO43

Sorry about that... Part # HLN1468A / Kit No: HLN6912A

RADIO43

Okay... Begining stages before swapping out: Radio A (Remote Mount) and Control Head A is the remote mount radio generating the FL 09-53 on Control Head after firmware upgrade Radio B and Control Head B is Dash Mount Radio that was working perfectly I place Control Head B on Radio A (Remote Mount) a...

RADIO43

akardam and tpg, Thank you for all the help. Amazingly, I took another head off a dash mount radio and installed it on the problem child remote head radio and everything booted up perfect. I then took the problem head from the problem child remote head radio and installed it on the dash mount radio ...

RADIO43

Not sure how to do recovery but I put a different head off a dash mount radio and it now works....

My next move is to put the head displaying the FL 05-93 on another radio (dash mount) as apposed to the radio (remote mount) it was on.

RADIO43

That is correct. Very unusual.......

RADIO43

Will the control head power up by itself (e.g. connected to power but not to the radio)? What is the control head part number? The remote head will power up and down even with the radio cable not attached to it. It also powers the radio up and down when the radio cable is attached to the head as we...

RADIO43

... and the head is stuck in the FL 05-93... Have you tried syncing the control head? Yup... When attached to the head it gives me "Failed to Communicate with radio. Please ensure cables are connected and the radio is powered on and then try again." Tried numerous times with no luck. Did ...

Search found 317 matches