Batboard

turtle9832

Solid

turtle9832

the VHF is mostly receiving on 155.47500.

i will get a video

Thanks!

turtle9832

I have an APX6500 that is a remote mount dual O5 head 700mhz. The O5 head is installed in a Tahoe center console next to a UHF PM400 and a VHF CM300. The 05 head's speaker is at the back of the console on the floor pointed up toward the ceiling. Until recently, the CM300 was rarely if ever used. Now...

turtle9832

you got the manual?

If not, PM your email to me and ill send it over.

Do you have your links set up?

Where are you located?

turtle9832

I was given a coordinated Amateur Freq Split of 442/447. The GR1225 has a band split of 450-470 when I use the shift key method to program the low freq every thing is OK except it will not Repeat. Is there a known work around? So it accepts the freqs when using the shift method. You say it will not...

turtle9832

We really need to get the software updated here. Whatever CS was running was a lot more flexible and user friendly than this... Anyone else agree? Yes. agreed vbulletin or xenforo xenforo is pretty flexible One final comment. EVERYONE here, or that comes here, should respect the ground rules and or...

turtle9832

Hey man, sorry. lock up may mean one thing to one person and something different to another (especially to me when you mentioned swapping out the UPS). We had issues along the same line as you are having with three MTR2000's. In one case, a firmware upgrade was the solution. On the two others, we bu...

turtle9832

What do you mean lock? Shuts down and then wont boot? Continous boot? Is there a wireline? Did the good station lock up after plugged into the wireline at the site? Does the known good station work after being removed?

Need more info.

turtle9832

Nagra used to make similar recorders in the 60s. They were designed to put out a taped message over the police channels. They were placed in locations that were prone to robberies ect. When the clerk pulled the switch it instantly went out....decreased the response time going through the alarm comp...

turtle9832

We are deploying our first 2016 explorers. It appears, according to the manual, that you MUST flip the rear hatch button between the head liner courtesy lights in the cockpit in order to activate the rear hatch release. or use the key. Is there a way to tie rear hatch lock into the door locks button...

turtle9832

Thanks man

turtle9832

Can an APX6500 with an O5 head display the talkgroup name AND the radio ID when receiving?

Thanks in advance

Mike

turtle9832

Internal speaker disconnected?

Did you just get acquire them?

Or did both of them suddenly stop...

turtle9832

D119

PM sent

turtle9832

we have a physical flip book and then some home made how to word docs on patching call alerting etc...

would you like those?

Mike

turtle9832

is the battery good? Is it fully charged?

Could channel 1 be set for 5W tx and the other channels be set to 1W tx ????

turtle9832

he's halfway home with regards to being able to read the radio. I told him to read the radio and report back to the thread.

Mike

turtle9832

d119, I was trying to help him with software issues, get him to read it, then look the codeplug over. I tried to point him to communications.support (but it didn't work out for him) I was thinking what Will was thinking. I didn't think of the tot set to 1 sec. No disrespect to the house here, just w...

turtle9832

As jackkacket stated, The MCS2000 itself does not do channel steering. the ITA2000 can only remotely key the MCS2000. If you look at page 19 of the ITA2000 book at the top (I looked at both revision 43004-010C and 43004-010H), it specifically states pins 1, 5, 8, 9, and 15 can only be made if the ra...

turtle9832

PM sent

turtle9832

RSM or PSM?

Vast majority use RSM in our area for your application.

I believe you could do a PSM which would bring your antenna up higher when in the car.

turtle9832

If the symptom goes away when the radio is that close, I think it may be important for you to tell us about the antenna, cabling, duplexer (if there is one).

turtle9832

My apologies, when you referred to subscribers and signal strength, I was thinking in another direction. I also didn't see the other topic.

turtle9832

I'm stuck on the, "random" part of the OP. Are there remote receivers? Or is it just a repeater station?

Also, can you elaborate on, "re-tune?" Was the station just switched from PL to DPL in the RSS?

What kind of station is it?

turtle9832

thanks people

turtle9832

I have a person new to ham who purchased an astro spectra W3. He installed it in a new Explorer. He removed the spare tire and mounted the drawer where the tire was. He then replaced the cargo floor and mounted a custom cargo area drawer organizer on top of the cargo floor. This eliminated easy acce...

turtle9832

im sure he will be even happier with you when the bots get his email address here

turtle9832

Our outfitter delivered the first Explorer with the module installed.

I must say that it works very nice.

You get feedback from the message center and installed indicator light.

We have it set to disable at 20 mph.

I have the install manual should anyone want it. Please PM for it. re

turtle9832

Settle down. don't take it personal. We have operators who have used the head set you mention on HT1000 and XTS2500 models. I myself have not used them. Based on the symptoms you describe, I would suspect the plunge mayber. But you say you get audio on the radio and headset at the same time. That's ...

turtle9832

Answers are much appreciated.

Would you be willing to share what you paid?

turtle9832

how does it interface with an APX mobile?

how do, "multiple users" use one mobile radio?

is the receive audio good?

is the transmit audio good?

im trying to get a demo to try for a command truck application.

turtle9832

Has anyone here seen this in use or actually used one?

http://www.wirelesscorpltd.com/solution ... ific/x10dr

turtle9832

Thank you SQUAD

RADIO PROFILES>>ALERT TONES>>MINIMUM ALERT TONE VOLUME

turtle9832

Is there a setting in CPS that will have the call alert/paging tones go off at a preset volume? We use call alert when an officer is not answering because he/she is napping, or his/her wide waist has turned the volume all the way down. When the radio is alerted/paged now, the display goes green and ...

turtle9832

List price is $500.

We are installing these on some patrol explorers next month

turtle9832

what's the firmware?
what type of system?
We had the same symptoms when ours were in a version 9 something I believe and the radios were scanning.
I see your in Lombard. PM me. I'd like to meet a bat laber in the area.

turtle9832

I would guess that the 8 in 8000 instead of a 7 for 7000 (over weight reporter with fat fingers?)was a typo based on the number of radios and the overall rpice delivered.

turtle9832

We had requests to run the lights, air horn, and siren from either O5 heads and O3 heads w/o DEK box.

After much monkeying, only came up with VIP plug to a 12V relay to trigger the air horn. In the end they found it more useful to have the feature linked to their garage door opener.

turtle9832

http://batlabs.com/images/spechi.gif

looking at the radio, the DB25 plug on the right

RIB between the radio and PC of course

turtle9832

I had this same problem on a pm400. The radio was working fine in a vehicle. The radio was moved to another vehicle. The installer incorrectly installed the rear accessory cable for ign sense. The radio then was having low output power on tx along with the low voltage alarm on tx. Radio was removed ...

turtle9832

The fan on ours begins to run immediately when plugged in (with power on or power off).

turtle9832

MSS-DAVE helped me with our apx6500's this is what I did:

Radio Ergonomics>>ID Display>>PTT ID Display>>Dispatch and Scan

Set the End of Voice timer for how long you want the ID to show during scanning.

turtle9832

im trying to get a pm400 to go down to 460.000 with 5.12

I changed the 7505 to 9090 in both places.

I save the changes and reopen the cps.

I put in the 460 frequency and tab to the PL setting and the frequency reverts back to 465.0000 automatically.

Any ideas?

turtle9832

Whats between the computer and the repeater? RIB? Cable? I can say from experience that my home made cable and rib worked fine on 1225 mobiles. When I used the same set up on a gr1225, it did not work. I had to borrow an OEM Moto ribless cable and it worked to program the gr1225. I went ahead and bo...

turtle9832

Danka

turtle9832

can anyone provide me with the part number to the RSS for a GM950?

I also need the part number for the HHCM.

I understand that this is a variation of the GM350, but I cant find the numbers.

Thanks in advance

turtle9832

very good
thank you

turtle9832

Is he using an RSM or a PSM?

We use a PSM and an HT1000 UHF stubby on the radio.

Radio works well in both bands.

turtle9832

Is the reason I can't get the call alert member #1 to work a firmware issue or operator error?

turtle9832

Call Alert Member #1, #2, & #3 (Programmable Buttons: Conventional & Trunking) DEFINITION: These button-presses allow the radio-user to quickly and easily Call Alert Call List Member #1, Call List Member #2, or Call List Member #3. For example, when pressing the "Call Alert Member #1&qu...

Search found 86 matches