I can not get my P-200s to communicate with the computer. I've tried all the serial ports and can not read it. I have the official software, interface and rib box ? I've spent many hours trying everything I can think of? Any suggestions I have used the same computer & rib box and serial cable to...

I tried using the same setup with different rib to radio cable and software on a GM300. Works OK with that hookup

The web site I'am referring to is batlabs cables.

My rib box is not Motorola however it has worked quite well on other model radios. the one I tried was a GM-300.
The only difference is the radio, radio to rib cable, and the software to program. I guess that means the computer the rs232 cable and the rib are ok?

Something additional- I hooked up a GM300 to the same rib box and Rib to computer cable. Loaded the GM-300 software and it works fine?

Hi I'am having trouble with my RS-232 port. The cable you show on this web site is a 9 pin computer to a 9 pin after market rib. This web site shows a 9 pin computer to a 15 pin rib cpnnector[ when I try to use it I get a serial port error # 011. I;ve tried switching com port still doesn't work HELP!

I'am trying to progran a p200 portable. I have the dos based computer a 15 pin cable to the RIB box, and the appropiate RIB to radio cable. Usin isg comm port 1 I get a serial buss error #011. I can't find anny listing of what this error is? If I switch to com port #2 I get a different code! Can any...

I have several high band Maxar50 radios that I would like to out on ham frequencies. Are these radios programmable? I opened one up and don't see any crystals. How due you go about changing channel?

Hi gang- well I'll try to reply to all your questions first of all the computers I used were pentium they have worked with other radios OK of course it used a different Rib to radio cable. Ive tried both com 1 and com 2. I've tried various baud rated and reply types with no luck. The com 2 port give...

I have several Radius P200 high band radios that I'am trying to program. I have al rib box and the cablr that hooks up to the p200. I starup the computer in DOS and bring up the p200 software. I bring up the menu choice F3 to view read or change.The next menu that comes uo I select F2 to read the co...