It will work just fine.

Disabled by a capable radio.......?

Windows XP or 7 32/64 bit. I programmed that unit myself with a OEM serial cable on Windows 7 64 Bit without issue. I am not a fan of windows 8.

I have 2 CM200 in a low power RICK setup. The transmit radio only turns on now when connected to the RICK and the receive radio is powered on. Is there a fuse somewhere on the board internally that could be the issue or does having the radio set in the CPS to RICK Tx change it to where it does not ...

They QOS downloads to about 1mbps unless it's late at night

Bandwidth is evidently very expensive in Chicago?

Maybe a Canopy link to the ISP? :lol:

Perhaps he is referring to the Illinois State Police.............we'll maintain your radio system if you provide us with free internet courtesy of ...

Guess we'll see what the depot says. Thanks guys! It was just a radio to mess around with anyway in the garage got it so dirt cheap figure it couldnt hurt. Good thing is it is still under extended warranty until Feb 2016. Either way I am not out much.

Got a PM1500. Get the FL 01-90 code. Tried CH sync no luck. Pulled the Front off my XTL5000 03 changed the flexes over, it does the same thing on the PM1500 however the one I pulled off the PM1500 works just fine on the XTL5000. I've tried manually putting it into bootloader mode and doing a dirty ...

Mounting the antenna on the roof was never an option for me. I have plans for another similar setup in 700/800Mhz which I plan on mounting the antenna for it on the passenger side. Also I have a UHF Pyramid that I may attach to the VHF of which the antenna for it will more than likely go to the ...

XTL5000 VHF Mid-Power with O3 Head installed in a Camry. Laird 150-162 NMO Antenna. Install went smoothly. No issues. If you have questions I'll help as much as I can.

http://imageshack.us/a/img12/1332/pmml.jpg
http://imageshack.us/a/img24/4736/8tkr.jpg
http://imageshack.us/a/img138/7025/s2av ...

Thanks guys! Jason, I'll give that a try. Worst case scenario is I'll have to send it in. I'll update you when I find out more! Thanks again!

Also yes I get an error on the computer as well. The radio will say program than I get s dialogue box that comes up that says something about hardware or software failure work some sort of hex code. Than the radio cycles off and than back on with the fail code.

I am using a USB to serial adapter with am OEM motorola serial cable through the front mic jack. Unsure of firmware version I would have to check wouldn't surprise me if it was 11. I reprogrammed 12 xts5000 and a sister to the xtl5000 all in the same manner. Also I am using Astro 25Mobile 16.00.00 ...

Was just working on programming a couple of XTL5000's. VHF 50 Watt with W4 heads. During the programming of one the computer froze and now the radio is showing FL 01/82. I have tried reading another codeplug from similar radio and writing to it. I have tried writing to it with previous codeplug from ...