Batboard

Charlied

I live near Dothan, Al and I asked the nearest authorized shop in Dothan if they could perform all the individual unit adjustments (sq, alignment,etc.) and they said they could try but basically assured me the unit would brick. Is there anyone near or not so near that could go through this unit and ...

Charlied

And

For the above mentioned items

http://www.softwarepatch.com/windows/index.html

Charlied

Works wonders.
You will need Firefox as your browser though.

http://windowsupdate.62nds.com/

Will cure what ails ya....

Charlied

http://windowsupdate.62nds.com/

http://www.softwarepatch.com/index.html

Between them I have solved my windows, and other products, updates.

To use the first one, you must be using Firefox as your internet browser.

Charlied

Question, if I may, on Linux.

Just what version, by whom, would directly take the place of XP?

Let me add, I have never used Linux, but wouldn't mind experimenting.

Charlied

possibly others.

Gorilla glue works.

I had my doubts.

I add so little to the site, I just had to jump all over this one.

Charlied

Changing from 8 to 16 channels is no biggie.

But the proper band split is.

Pulling the front cover and, unplugging the two bottom ribbon cables from the controller should reveal the proper bandsplit, IF my mind serves me correctly.

Charlied

You don't choose it.
It's chosen at the factory.

Charlied

Sorry but your links don't work...

Charlied

I'm sorry, Iden?

Charlied

So the ultimate (?) and only (?) push to talk will be Sprint?

Charlied

Questions as a consumer.

Is Nexthell going away?
Didn't Sprint buy them?
Whatever happened to Verizon's push to talk?

Charlied

I just wish I could scan provoice.

Charlied

Speaking of the cup holders.
Are they anything special or do they just hook behind/onto the center trim?

Charlied

I B T L

Charlied

Hacksaw with a metal cutting blade makes quick and neat work of a battery.
Just follow the lines on the motorola battery.

Charlied

http://www.batlabs.com/ht6hack.html

Charlied

Saber I VHF portable radio
Secure module installed
Good Battery
"Cup" charger
Antenna
Shoulder Mic
Belt holder

Charlied

Got it.

Bad ground wire.

Thanks for your help......

Charlied

Yes, I did save the file.

BUT, this does not help me when the radio will not communicate.

Is there a way to do a reset, as in jumping a couple of connectors to unlock it?

Charlied

Somehow I've turned my Saber I into an expensive paperweight.
Is there anyway to reset it?

I get no on beep, rec or transmit, and no communication.

Charlied

Does anyone have directions on how to take an old Saber I mic cable and make a programming cable?

Charlied

Sorry, I missed that.

VHF

Charlied

You guy's are sharp, no doubt about it. BUT, Please narrow it down for me. Like Mark Twain said, "We're all ignorant, just about different things". ONE of these "things" for me is this radio. I would like a radio that has a control head with the Alpha/Numeric display (I have a ba...

Charlied

What's the extra little pc board attached to the controller?

Charlied

I can't locate info on what model it's for.

It had an extra board (approx 1" X 1 1/2") wired to it.

Looks like it might be for an MT1000 model.

Charlied

I've been checking out some of the X9000 and I have one thing to say: I'M SO CONFUSED!!!! What head unit works with what radio that can be converted to do what!!!!! I think I would like a unit that has the small head with alpha tagging and the radio that will hold at least 32 channels (modes?) (pref...

Charlied

Why them dirty low life peter puffers.

Don't mind me, I'm just drunk, that's all.

It's been a while since I guzzled Captain Morgan.

Charlied

I've been checking out some of the X9000 and I have one thing to say: I'M SO CONFUSED!!!! What head unit works with what radio that can be converted to do what!!!!! I think I would like a unit that has the small head with alpha tagging and the radio that will hold at least 32 channels (modes?) (pref...

Charlied

What prices would I be able to pick up the a whole unit x9000 for.
How many channels does it have?
What wattage output?

Charlied

What, not too old of a unit, would give me lots of channels and power for the VHF frequencies and possibly a combo unit for VHF and UHF HAM frequencies.

Charlied

programming channels on an MT1000?

Charlied

Well that's finer than frog hair.

Couldn't we have that info on the site somewhere.

I know I'm a low life who hasn't contributed, but it just seems it could be.

Thank's

Charlied

H43GCU7180AN

It looks like the last two in indicate freq band.

AN = low band
BN = VHF
CN = UHF

Am I correct?

Charlied

Forbidden
You don't have permission to access / on this server.

Apache/1.3.29 Server at http://www.batlabs.com Port 80

I"ve been getting this alot lately.

Charlied

You don't have permission to access /portables/gp300.jpg on this server.

Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.

Charlied

Has anyone used a "RELM" radio for communication?

http://www.usascan.com/files/RPV599APLUS.html

http://www.usascan.com/files/scv32d.html

Charlied

And don't forget to hook the domeflotcher up to the thingamajig and by pass the hickamadodger.

Don't worry about it. It's technical jargon...

Charlied

Being a novice here myself, I have found that when the battery starts to go bad or loosing it's charge the led starts to blink red.

Charlied

Search found 40 matches

MTS2000 alignment and squelch adjustments

I have GREAT success with these two web sites

Broken channel selector knobs on MT1000's,

What would be a good price for a Saber I with.........

Saber I is now a paperweight

Saber programming cable from mic cable

Flex Controller NTN 4568D ???

Question about X9000

Question about mobile units for HAM frequencies???????

How much does a MOT shop charge for...

Anyone decipher this portable mod number?

FORBIDDEN error message

Forbidden

Off the /\/\ topic but anyone using a "RELM"

MT1000