Search found 34 matches

by tztop10
Mon Apr 18, 2016 11:19 am
Forum: Radio Programming
Topic: MDC1200 System failing?
Replies: 1
Views: 2291

MDC1200 System failing?

Hey there, I have a current system which we are transferring to a new frequency and new repeater, on the old repeater the MDC comes over displaying the unit ID's, but the new repeater does not show the ID for everyone, is this a timing issue? If so is it on the repeater or the radio? How can this be...
by tztop10
Wed Mar 16, 2016 12:13 pm
Forum: Radio Programming
Topic: Programming scan settings HT1250
Replies: 2
Views: 2540

Re: Programming scan settings HT1250

was everything set to be in the scan bank
by tztop10
Tue Feb 23, 2016 12:43 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: HT1250 Won't Transmit
Replies: 6
Views: 3308

Re: HT1250 Won't Transmit

i know its old but try checking if CPS auto sets your tx offset
by tztop10
Sun Oct 25, 2015 5:06 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: HT1250 Won't Transmit
Replies: 6
Views: 3308

Re: HT1250 Won't Transmit

although unlikely it could be that the TX frequency got altered for some reason, that would be the first place to check.
by tztop10
Mon Oct 19, 2015 1:41 am
Forum: Radio Programming
Topic: MTS2000 & CPS...
Replies: 9
Views: 4976

Re: MTS2000 & CPS...

what version of CPS are you using now
by tztop10
Wed Oct 14, 2015 2:38 am
Forum: Radio Programming
Topic: Windows 10 & ASTRO 25 CPS
Replies: 10
Views: 6394

Re: Windows 10 & ASTRO 25 CPS

Did you try installing and running it in Compatibility Mode for windows 7?
by tztop10
Wed Oct 14, 2015 2:36 am
Forum: Radio Programming
Topic: HT1250 CPS Region Issue: Malaysia?
Replies: 4
Views: 3105

Re: HT1250 CPS Region Issue: Malaysia?

it does not work always but that is what you would do, you can try to flash firmware but not recommended
by tztop10
Wed Sep 16, 2015 11:48 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: NMN6193B with iPod earbuds/headphones?
Replies: 1
Views: 1180

Re: NMN6193B with iPod earbuds/headphones?

the mic on the earbuds will not pick up since the 3.5 doesn't read fully into the speaker mic, but I know my HT1250 mic has a built in 3.5 jack that works very well (for rx only)
by tztop10
Mon Aug 31, 2015 2:15 am
Forum: Software & Firmware Releases & Issues
Topic: Professional Series CPS R06.12.08
Replies: 4
Views: 9607

Re: Professional Series CPS R06.12.08

was there a ui change in this version, im waiting for them to come out with a Proffesional series CPS with the same UI as the TRBO CPS
by tztop10
Mon Aug 31, 2015 2:07 am
Forum: Radio Programming
Topic: Waris CPS install on Win 7 x64 Help please!!
Replies: 3
Views: 2832

Re: Waris CPS install on Win 7 x64 Help please!!

06.12.05 works on 64 bit systems, you shouyld try compibility mode under properties--->compatibility--->Select Windows XP SP3 from the list and work your way up until it works
by tztop10
Sat Jun 27, 2015 11:12 am
Forum: Radio Programming
Topic: MTX (Waris) Programming Software
Replies: 6
Views: 4152

Re: MTX (Waris) Programming Software

the cps password is a password set on the radio, you may need to do a hex editor on the radio to remove the password, check out this thread
http://batboard.batlabs.com/viewtopic.p ... 5&p=404578
by tztop10
Sat Jun 27, 2015 11:07 am
Forum: Radio Programming
Topic: Bricked HT1000?
Replies: 33
Views: 12522

Re: Bricked HT1000?

are you writing to the radio, with CP's this problem is common when you have a radio that you use for a template and write to multiple radios there is a clone feature in the CPS for CP radios, in your case you may want to read the codeplug first or you may need to use the homebaked WARIS RADIO EDITO...
by tztop10
Sat Jun 27, 2015 11:00 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: To newly registered users: Welcome! Please read...
Replies: 109
Views: 536103

Re: To newly registered users: Welcome! Please read...

how can I be a registered user, been on for almost a year posts take a while still
by tztop10
Sat Jun 27, 2015 10:59 am
Forum: Radio Programming
Topic: EX600XLS OOB w/CPS 6.12.05
Replies: 2
Views: 2477

Re: EX600XLS OOB w/CPS 6.12.05

Just out of curiosity, does the radio end up reading the 440mhz frequency. if I have a low band radio 127.000 can I change it to a 46.xx frequency?
by tztop10
Wed Jun 24, 2015 2:47 am
Forum: APX Series Subscribers
Topic: APX-7000 external spkr mic not working
Replies: 4
Views: 3216

Re: APX-7000 external spkr mic not working

is there a silencing setting within the programming, also are you sure that the contacts are all connecting
by tztop10
Sun Jun 14, 2015 11:56 am
Forum: Radio Programming
Topic: Programming a remote head XPR 5550
Replies: 7
Views: 4122

Re: Programming a remote head XPR 5550

For my XPR I have a cable for back and front, both go into US and get recognized as a network device and works from the remote head
by tztop10
Sun Jun 14, 2015 11:53 am
Forum: Radio Programming
Topic: Bricked mts2000
Replies: 3
Views: 3237

Re: Bricked mts2000

try writing a factory plug from the cps sample files you may be able to format it back to factory (I have done this with HT1250's and EX600's and CDM1250's)
by tztop10
Sun Jun 14, 2015 11:50 am
Forum: Radio Programming
Topic: HT-1250 HK25KDF9AA5AN/Rib-less USB/CPS Issues
Replies: 4
Views: 3265

Re: HT-1250 HK25KDF9AA5AN/Rib-less USB/CPS Issues

if I remember correctly, the CPS Pro Series doesn't take into account the serial number of the receiving radio, as long as its the same model you will be fine, software for the CP200 will make you clone the radio instead of writing direct.
by tztop10
Mon Jan 26, 2015 3:08 am
Forum: Radio Programming
Topic: XPR8400 Repeater Stuck in Disabled Mode
Replies: 2
Views: 2398

Re: XPR8400 Repeater Stuck in Disabled Mode

It's Not using Ethernet at all
by tztop10
Tue Jan 13, 2015 3:35 am
Forum: Base Stations, Repeaters, General Infrastructure
Topic: XPR8400 Front LED
Replies: 11
Views: 4979

Re: XPR8400 Front LED

What if you were to flash a new fresh codeplug into it, would that re-enable it?
by tztop10
Mon Jan 05, 2015 4:11 am
Forum: Base Stations, Repeaters, General Infrastructure
Topic: XPR8400 Front LED
Replies: 11
Views: 4979

Re: XPR8400 Front LED

What is RDAC, does this come with MOTOTRBO CPS
by tztop10
Mon Jan 05, 2015 4:07 am
Forum: Radio Programming
Topic: XPR8400 Repeater Stuck in Disabled Mode
Replies: 2
Views: 2398

XPR8400 Repeater Stuck in Disabled Mode

I programmed it but do not understand why the disabled light keeps blinking...

The blinking Red LED "Disabled" means:
Blinking RED= Repeater in self-test mode.
by tztop10
Sat Nov 08, 2014 8:33 am
Forum: Radio Programming
Topic: What CPS for a Motorola GP680 ?
Replies: 6
Views: 4299

Re: What CPS for a Motorola GP680 ?

If you are still interested in flashing it there is a waris codeplug tool take a look at that, WARNING IF DONE WRONG YOU WILL PERMANENTLY BRICK YOUR RADIO MAKING IT ONE EXPENSIVE PAPER WEIGHT
by tztop10
Sat Nov 08, 2014 8:31 am
Forum: Radio Programming
Topic: XTL5000 mdc post data mute
Replies: 6
Views: 3896

Re: XTL5000 mdc post data mute

there is a DOS muting feature check it out under signaling options
by tztop10
Mon Nov 03, 2014 4:24 am
Forum: Radio Programming
Topic: XTL5000 O3 Ignition Sense
Replies: 2
Views: 2649

Re: XTL5000 O3 Ignition Sense

by tztop10
Mon Oct 27, 2014 3:00 am
Forum: Radio Programming
Topic: CP200 D basic programming
Replies: 1
Views: 2420

Re: CP200 D basic programming

arlojanis, can you explain in detail what your trying to do
by tztop10
Mon Oct 27, 2014 2:57 am
Forum: Radio Programming
Topic: CPS Software and Windows 7 64-bit
Replies: 5
Views: 3968

Re: CPS Software and Windows 7 64-bit

I would check your com-port settings to see what port you are using, you can also switch the com port if needed, this sounds dumb, but have you restarted you machine since installing CPS, this would cause the software not to be able to read the radio, a simple reboot would fix that. also try using a...
by tztop10
Tue Oct 14, 2014 7:47 am
Forum: Radio Programming
Topic: CDM 1250 airhorn option
Replies: 2
Views: 2601

Re: CDM 1250 airhorn option

I believe the usable pins are 3,4,6,8,12,14
by tztop10
Tue Oct 14, 2014 7:42 am
Forum: Radio Programming
Topic: CDM 1250 airhorn option
Replies: 2
Views: 2601

Re: CDM 1250 airhorn option

you should be able to do this through pins, I do not know what pin is horn/siren but you can probably tie it in through there and specify in the CPS Programming what button will activate it, you can also specify long press short press in the CPS
by tztop10
Sun Oct 12, 2014 5:03 am
Forum: Radio Programming
Topic: HT1250 firmware update gone bad
Replies: 13
Views: 7603

Re: HT1250 firmware update gone bad

try to read the radio in CPS and you should get an error that it is corrupt, it will ask you if you want to rewrite with factory. (This is as long as you have an EPROM error)
by tztop10
Mon Sep 29, 2014 2:24 am
Forum: Radio Programming
Topic: Call List Import
Replies: 3
Views: 3088

Re: Call List Import

you should be able to copy paste
by tztop10
Mon Sep 29, 2014 2:24 am
Forum: Radio Programming
Topic: CP200 Not Being Read
Replies: 7
Views: 4301

Re: CP200 Not Being Read

you need to have a cable that has a battery attached usually a E battery, you can also do it with serial if you choose not to have the batter part of the cable
by tztop10
Mon Sep 29, 2014 2:20 am
Forum: Radio Programming
Topic: What CPS for a Motorola GP680 ?
Replies: 6
Views: 4299

Re: What CPS for a Motorola GP680 ?

flashing it to a 750 or 1250 would not be so simple since the hardware is significantly different. The CPS software that you need is the CPS GM/GP series do a quick google search for it and you will find some information on it
by tztop10
Mon Sep 29, 2014 2:17 am
Forum: Radio Programming
Topic: Qucik Call Decode question
Replies: 2
Views: 2808

Re: Qucik Call Decode question

You would do that through adding a signaling system, keep in mind you need to have the proper tone frequency and as far as I know you can only use 1 system per personality, you also have to keep in mind that you can only have 4 decoding systems per radio, if you want you can create a different perso...

Go to advanced search