You can use Windows 10 with a KVL4000, you just can't use the installer package. I did an update today. The workaround is really easy.

Connect to KVL using Windows Mobile Device Center
Go to connect without setting up
Go to file management
Browse to program files/kvl/upgrade

Browse disk you ...

We have several that have set for a year or so, not as long as yours did. Normally, we let it sit for 24 hours or so on the conditioner, doing that about 3 times and it "most of the time" will recover to 95-100% of capacity. Generally, that will do it, but sometimes they won't come up at all and end ...

Is it possible to plug a second mic into the rear panel? For example, using a deskmic with a RJ45 jack to add a second microphone.

Basically, I have a consolette setup across the room. It is tied to a ceiling speaker for audio. I am wanting to plug a microphone into the back to extend the ...

First thing I would do, is put 12v on the ignition sense to make sure it hasn't been changed. This would determine if there is an issue with the ignition sense parameters.

Second thing, would be attempt to read from the radio vs the control head. I have ran into a unit one time that appeared to not ...

Does anyone know of a way to project an O9 head to a laptop?

On our O9 heads they are kinda hard to see due to the black and white and the way they are mounted in the console. You have to lean forward to see what channel you are on. I know Motorola used to have the vRCH software that would put the ...

What is the part number of the cable you are using? We had an issue with reading the 4000s and found if we were using the "B" revision cable, it worked fine.

I noticed that on our APX8000s that just arrived. Motorola engineer that I talked to stated it is normal to have a little play.

I second the staying with the APX6500. If you are familiar with it, then just keep using it.

I personally wouldn't have the antenna inside. I would get it out of the building.