@fogster - I sent a PM on 9/6/2021 that you haven't read yet.

You can purchase a clone flash adapter on eBay or make your own. I will send a PM with the schematic.

Here's some info. More is out there to be found.

http://www.repeater-builder.com/motorol ... 2a40-e.pdf

I haven't been back to the shop yet. Maybe next week. but 927.7 was definitely programmed into the rx, & 902.7 was definitely programmed into the tx. This I saw with my OWN 2 eyes. But like the 2500, I could not change the 927.7 freq with the keypad to another 927 freq. The 927 freq was entered...

Open MTS2000.exe or MCS2000.exe using Hex Workshop. Use the replace command to look for the following hex strings, and then replace them with the provided strings. Make sure you are searching for hex values. RX Lower Limit / TX TA Lower Limit 935.0125 = 9428BB37 Change to 926.0000 = 80A33137 or 927....

We're back...

Did you miss us?

Gary- If you are not familiar with upgrading the firmware in these radios, you will need a rib and a fully wired cable going from the rib to the radio. You will also need a flash adapter, part number HLN9742, which you can either purchase or make on your own. I have done both. If you use a "rib...

R01.04.03

Use the replace command to look for the following hex strings, and then replace them with the provided strings. Make sure you are searching for hex values. RX Lower Limit / TX TA Lower Limit Factory: 935.0125 = 9428BB37 Change to Ham: 926.0000 = 80A33137 Replace command should report changes in twel...

Yes, no problem.

What version of CPS are you using?

Sorry guys, no ham 900 on an APX4000.

And the release notes say January 2017.

If you want to be able to set the radio to affiliate only on PTT, you need an MTS2000 or an XTS3000. They are the perfect radio for directly receiving or scanning TGs on analog Smartnet / Smartzone systems.

It's locked on automatic.

+1 to Wavetar's comment. Depot assistance will be needed.

The newer versions of MTS/MCS CPS (e.g., R02.02.00 and R02.03.00) are modified in the same manner. Open MTS2000.exe or MCS2000.exe using your favorite hex editor. Use the replace command to look for the following hex strings, and then replace them with the provided strings. Make sure you are searchi...

A Google search will reveal that ham FPP is not a CPS modification. A little common sense will reveal that you do not want to be exploring this topic in public.