Hi i read here at the Board that it is possible to Print the analog Scope or Spectrum display with a serial Printer which is connected to the 5 Pin din Plug. It must be a epson or IBM with Graphic mode. Until now i never used a Printer but now its some time to do. Question: IBM or Epson Compatible i...

IFR 1600 / TS4317. I have a very big problem. On my IFR 1600 (EGA Video) runs software from 2008. TS4317 17V.6.07.04 I Played arround in the AUX menü and pushed CD-)TS. The Screen Prints "erasing". In this moment i got panic an turned the machine off. i know, please dont laugh, this was a ...

OK thank you JRY i found it in the mil service manual. 1 +5 volts 2 on off 3 band control for switchable band pass 4 ground 5 +15 volts coupled to pin 6 6 7 power monitor 1,5 volts + - 0,5 volts 8 - 15 volts this is for the broadband amplifier 83A1A3 RF Amplifier mounted in some special boxes for mi...

Hi I have some questions about the pl 1536/ grm which was mounted under my IFR 1600. I have no use for this "special" box but insinde is a wideband amp i think. There is a motorola mhw591 rf module, and a push pull amp stage with motorola MRF146 which is a rf wideband transistor. I think -...

thank you jry yes the machine has mixed parts with different numbers, but it woks fine. yes i know there is many of " mechanical" alignment so i wondered about the menu calibration and what it does. yes i run the military ts 4317 software and i have no option to change it back, but i dont ...

hi i am a radio amateur and have some questions about my ifr 1600. i have bought a second ifr 1600 for my testbench. Unfortunately it throws two failures, sinad error and cwt bandpass error. the solution i found here in the batboard so i could find some bad caps on audio board, now it works great. b...