Batboard

scoops

You can load keys from a remote head. You must first provision the radio with the kvl 4000. You need cable HKN6183B first.

scoops

We found if more than one console has the same channel selected as primary, the audio sounds different

scoops

no, its says sec-key 1 the zones are just ZA, ZB

scoops

Hi,
My APX6000 radios with multikey secure displays the key name when receiving. I don't see any place where there's a setting to disable this. Under secure wide-multikey, all 3 display items are set to disable.
Thanks for any help
Chris

scoops

I'm using this Mic on an APX6000. The audio sounds muffled on the other end. I've boosted the Mic gain to 6. The noise reduction is set to normal. The audio doesn't sound as clear compared to the internal mic. Is this a function of the waterproofing ? Anyone else experiencing the same?
Thanks
Chris

scoops

All is well now. Enabled CKR, loaded my keys..Thanks to all for the help.

scoops

I get the radio back this week. I had it flashed to the latest host and added a ucm with AES. From what is posted here, it should now work. I'll post my results. Thanks to all for the help..

scoops

Thanks motorola_otaku

scoops

Its not multikey, 7.70 and 8.03 Flash is 100008-000000-0. It has des-xl , des-ofb .So if its flashed for multikey and the latest host, it will keyload? I know I can get it upgraded to the latest flash with multikey..

scoops

Thanks to all the replied .. I found the part number for the ASN option. I'll have to update the kvl..

scoops

Thanks, I would think since the 4000 replaces the 3000, it would be compatible.

scoops

I only have astro 25 and radio authentication in the kvl4000. I tried both with no luck.

scoops

I have an astro saber des-ofb that was loaded years ago with a kvl3000. I tried using a kvl4000 with the radio and it will not connect. The radio displays "keyloading" but will not communicate with the kvl4000. I tried 3 keyloading cables including one with the hirose "D" and a T...

scoops

Went on another cruise in Feb, 2012. We had 13 people in the group. We used 10 nextels on direct talk with about 95% coverage on the whole ship. Now that nextel is decommissioned , there's tons on ebay for cheap.

scoops

Yes, the quantars are repeaters and are off site. The whole system is eventually going to be replaced, but budgets aren't allowing it to be done all at once. I will have to get clarification from Motorola.
Thanks again

scoops

The Motorola salesman says we don't need a DIU with the MCC5500. We're using quantars for the 3 main channels, the rest will be consolettes . I'm sure the quantars don't store keys.. Maybe the DAP module would, but I didn't see any mention of it in the installation manual. I'm just making sure we ge...

scoops

My work is planning on replacing their old dispatch consoles with MCC5500. Since the new system replaces the old DIU's, my question is where in the new system do the secure keys get installed? I've browsed through the MCC5500 installation manual and didn't see it anywhere. The only mention of encryp...

scoops

I set the zone for 3 and the channel for 5. All is working ok now. Thanks to all that replied

scoops

Ok, I named the zone "Z1". Now the display alternates between " Z1" and Channel name. I guess since there's not enough room for both, it has to alternate?

scoops

Thanks, i'll check it out

scoops

Hi, my work just received a few APX6000. When on, the top display constantly flashes the channel name. No matter what channel its on. Is this normal? Someone else programmed them, so I don't know if they did this out of the box. I couldn't find anything about it in CPS or the operating manual. Thank...

scoops

I have the schematic. I'll play with it in a week or so. Thanks for your help..

scoops

Hi, I tried reading a syntorx MM, I keep getting VCO bit error. Maybe it is the 1801..

scoops

Hi, I'm using mx300-E with RLN4070A . I'm trying 5096C eproms. I tried tightening the screws, reflowed the solder. I replaced the IC , cleaned all the contacts. It must be a bad adapter..It did work some years ago..Thanks for your help..

scoops

Hi, I've been playing around with a R-1801A programmer . I used it quite a few years ago with out issue. I've been trying to read/edit some 5096c eproms. I either get "prom missing", or "wrong model number ". I've tried all model numbers with the same results. I tried different s...

scoops

It was a typo, I did use Hex editor. It looks like I figured it out. I was opening the patport.exe.config instead of the patport.exe.
I appreciate your assistance..
Chris

scoops

Thanks for your reply. I'm still missing something. I open the exe file in a text editor. I search for these offsets and still get not found. I was trying to follow these instructions...http://www.akardam.net/moto/docs/cps_oob.php

scoops

Does this work with R17.01? I've been trying and get the string not found when I search for the string.
Thanks
Chris

scoops

We went on a cruise in February and used Nextel direct talk with 4 units. They worked great. A couple of dead spots especially from front of the ship down through multiple decks . A lot smaller and convenient than carrying a portable radio.
Chris

scoops

Look on batlabs, model specific under spectra. You probably need to
jump pins 2 and 8 on the 15 pin connector.

scoops

Sounds like it lost the secure key.Transmit with secure on and the display should read key fail.
Scoops

scoops · Mine is version 05.01.01. Guess they still have a bug .

Mine is version 05.01.01. Guess they still have a bug .

scoops

My voice announce still works even when I select mute.I have mute all tones selected under alert tones field. What am I missing?
Thanks
Chris

scoops

We have a R2625 digital and an older 2600 non digital service monitors. We're having our tower company come in and check all the antennas and cables.

scoops

No multi key involved. Its like it takes a second for the DIU to decode.I'm leaning towrds it being a signal problem. It happens more on portable than mobile. When a mobile does do it, its usually on the edge of town. We're installing remote receivers soon, so we'll see. Thanks for your input
Chris

scoops

All the radios and DIU were programed with the same key from the same KVL.The problem is only heard sometimes, and from various units, portable and mobile.Re key is a last option as there's almost 300 radios.

scoops

Just some corrections to the original post. I'm a user on the system. I have observed mobiles have the same problems, and on different channels.Portables seem to have the problem more. The Secure modules in the DIU were zeroed, and the key reloaded.The problem is still there. All the channels have t...

scoops

Try under the display and menu section. click PTT ID, then END OF VIOCE TIMER. If you click the "?" with the arrrow and bring it to the item in question, it will bring up a help menu and explain what that setting does.

scoops

I've converted a saber 1E to a saber 2. You'll need a saber 2 case, and a front shield with the button pads. Make a saber 2 code plug for the same band as the 1E, then program the radio.
Chris

scoops

I've noticed that Bird meters makes a meter for digital modulation and Telewave does not. Is there any difference in readings using a Bird 43 on a digital signal?
Thanks
Chris

scoops

The interface is to a tone remote console. So is there a way to change this so the channel selected stays. Can this be done with the current interface board.
Thanks
Chris

scoops

I have a W5 astro spectra in a consolette. The radio is programmed with 6 modes. Only mode 1 and 6 are in the zone. When on mode 6, the radio will tx from the mic connector. If the radio is keyed from the remote, it switches to mode 1. I've been all over the RSS and cant find whats causing this. The...

scoops

Can a dual head W7 astro spectra radio use a W5 rear control head?I'm only interested in the basic functions at the rear head mode, vol .
Thanks
Chris

scoops

I'm not a guru either. Make sure FIPS is not enabled. This will erase keys if battery power is lost. Are you entering the correct location of the keys? The kvl stores hundereds of keys. When you turn it on, make sure the key location is there or entered.
Hope this helps
Chris

scoops

While in the astro mode encryption, does "XL" increase the range as it does in analog secure?
Question 2, my KVL appears to only support DES. If I check XL in the radio programing(XTS3000), the radios will hear each other.Does this sound right?
Thanks
Chris

scoops

I have converted one into a saber 2. You'll need a speaker shield with the keypad on it in, and a saber 2 case,order to change zones.The 1E doesnt have this.
Chris

scoops

Would an upgraded 3011CX to DX keyloader be able to clone to and from a KVL.
Thanks
Chris

scoops

I'm not a CPS expert, but one problem I did have was when I upgraded from CPS 2.05.01 to 3, I lost my serial port com 1. The port would report busy. I tried everything including uninstalling the 3.0CPS. I had to physically install another serial port, on com 2 and all works now. I havent tried upgra...

scoops

I have a saber 2 with an 8k chip that has been programed as a 2k radio. Is there anyway to bring it back to an 8k chip without sending it to Motorola.
Thanks
Chris

scoops

I'll send a picture of the adaptor to someone with a web page to post it here.
Chris

Search found 69 matches

Re: APX7500 Encryption key restore after Firmware update

Re: MIP5000 Audio Question

Re: APX6000 secure keys

APX6000 secure keys

PMMN4065A Mic

Re: Kvl 4000 and astro saber

Re: Kvl 4000 and astro saber

Re: Kvl 4000 and astro saber

Re: Kvl 4000 and astro saber

Re: Kvl 4000 and astro saber

Re: Kvl 4000 and astro saber

Re: Kvl 4000 and astro saber

Kvl 4000 and astro saber

Re: Caribbean Cruise

Re: mcc5500 and encryption

Re: mcc5500 and encryption

mcc5500 and encryption

Re: APX6000 display

Re: APX6000 display

Re: APX6000 display

APX6000 display

Re: R-1801A

Re: R-1801A

Re: R-1801A

R-1801A

Re: help with cps out of bands mod

Re: help with cps out of bands mod

Re: help with cps out of bands mod

Re: Caribbean Cruise

Wattmeters

Astro Consolette

Remote head

Encryption questions

Keyloader Question

Saber 2k to 8k board