Batboard

Jim2121

could be I pressed MTX9000 --- I was at work yesterday waiting for the electric co. to show up at a mountain top that lost power to a public service repeater... Our AC alert did not work so it drained all the backup power. So Max-trac may have a point. I never played with HEX, ect... if thats all th...

Jim2121

If your talking about the "Self Test Alert Tone" (same as pow. up alert tone when you turn it on) its in all the jedi & mtsx/mtx software. Change it from Disabled to Enabled. If you can't find it? or don't see it? someone may have done some work to that codeplug? Some jedi's say "...

Jim2121

it is a longshot... there are lots of collinear antennas out there. See if you can post a pic?
never know.....

Jim2121

Al has a good point. I have a police repeater 2 miles away on 156Mhz. It wipes out the 2 meter band. If your going to use radio A, to transmit & radio B, to scan, What are you going to scan on? If the Antenna is sending out RF? antenna? Of course if your not transmitting, then you could scan. On...

Jim2121

Even with two mobile radios and a duplexer the wideband frontends on the mobile radios are going to cause desense problems in the same band. Like someone said already, better to use two antennas and space them as far apart(horizontally) as possible. thanks Al I was thinking the same... ____________...

Jim2121

I'm using this: http://www.universal-radio.com/catalog/switch/1864.html BUT you want the same band..?? you need a duplexer as the above post says... we don't know the wattage or frequency...less of a headache for another antenna....and this switch is for 1 mobile at a time...

Jim2121

riggz wrote:Where would I find a new speaker?

a communications repair shop in the yellow pages in your area, that does work on motorola's.
Or a refurb kit WITH electronics off ebay. you should carefully check the flex assembly as in the above post by Todd---wavetar.......Jim

Jim2121

I just came back from Phoenix, amazing weather compared to NYC despite the rain earlier this week. Made a few contacts on repeater and have some good conversations with local hams. I just had my 70cm with all the repeaters below 447 programmed. There are activity, but not very active. Some of the r...

Jim2121

You can use labmtsx and tinker with the numbers to get the talkaround (maybe). read this post; http://batboard.batlabs.com/viewtopic.php?f=3&t=24199&p=130253 6.08 is the newest DOS mtsx I believe. I thought the latest version was 06.07.00 (Nov. 14th. 2002) correct me if I'm wrong? and, the ...

Jim2121

apco25 wrote:Heh, where you guys and these freqs when I lived in Flag from January to May...

In a meeting in Las Vegas....

Jim2121

If you can get hold of a speaker mic, put it on and try it again..then post back the results..

Jim2121

here's a link to start your search: http://www.geocities.com/mnowlen/radio.htm#Crystals
grab some email's & phone numbers...

http://www.icmfg.com/motorola.html

Jim2121

no never delt with him! I think the postage is too good to be true.. I've done business with HK a few years ago and postage was a min. of $30.00 Go see his feedback on page 11, where someone won bids on 7 items and the postage was $43.+ and was charged $60.+ and that was for an antenna adapter...If ...

Jim2121

This has been around since 1972 http://www.pasternack.com/ over 200 page catalog they send out on request. The next one: http://www.cablestogo.com/ .....btw. these two catalogs you can just about wire a space shuttle......Jim 8) 1 more I just found the catalog is: http://www.antenex.com/index051206....

Jim2121

jim2121 thanks for the reply to my post.But the x button will toggle the radio back to channel display. Any more idea's ??. Thanks again I did this from memory.... I don't own a GP-68 (since there not FCC approved anymore, export radio only.) So at this point...I hope someone will post the answer t...

Jim2121

do you have a user's guide?

http://www.batlabs.com/gpman/top.html

try pressing the top vertical button jut under the SIG. row of buttons

Jim2121

RKG wrote:I'd check that license again; 468 is generally limited to repeater INPUT use.

I was just going to post the same

Jim2121

Funny to see there are LOTS of repeaters use 100.0 for PL tone. How are the activity levels wise? There seems to be a ton of repeaters on V/U/900. I'm still deciding on which radio to bring with me. 8) I would bring a 2meter/440 ... 2 meter band is full. Almost no space left for a repeater. UHF is ...

Jim2121

email sent... Jim.. didn't get email? PM replied....

Jim2121

where's my 1550?

Jim2121

MT2000
HT1000
for this area anyway there are some BK's around & Kenwoods
Payson is still analog here.

Jim2121

http://www.repeater-builder.com/rbtip/ Someplace in here I thought I saw a post on this...
anyone else? JR

Jim2121

either UHF or VHF -- its a monobander, as for info. heres the Users Guide: http://www.flash-services.com/upload/us ... -gm660.pdf

Jim2121

and another way is: "Mouser Electronics" and/or "Cables To Go" has USB to Serial Port adapters... we have had all good luck.....Jim

http://www.mouser.com/

http://www.cablestogo.com/

Jim2121

believe it or not my problem was fixed with "Dial a Fix" http://wiki.djlizard.net/Dial-a-fix
Got it from the Dell forum... so my October downloads came down the pipe ok...with an ok install... seems like I had unregistered DLLs .....JR
____________________________________
welcome to windows

Jim2121

see if you can still find the original codeplug for this mobile? If you tried to program it with using a previously created file of my other GTX when you got an error. I don't think the clone will work. I could be wrong? There are a few others who had the same problem as you have. Go to the "Se...

Jim2121

Is your mobile GTX "working ok" the way it is? or is something not working?

Jim2121

Sid still goes in his old shop a few times a week from who I spoke to on the phone... But its now under new management-so to say...[see above posts] you can reach the place by calling: 888-999-0589 or 602-275-4505.....The old Air-Comm link takes you to ebay, So please don't post it or the moderators...

Jim2121

10-4 I posted the link, but it was a re-direct link to ebay and (for the rules here, it was removed, I was in agreement).... But if you search for Air-Comm it will come right up. I also called them and asked if they were going to have a website off ebay! They said not now, ebay only or walk-in or ma...

Jim2121

the XTS5000 with FPP--but I still will always like those JT/HT can only use so many channels. the question "New M Portable" for what application
________________
my 2 cents

Jim2121

I found a link here that may help? Revised on Jun 30, 2007

http://www.miarc.com/freq/902_rptr.html

Frequency Coordinator (902 MHz and up):
Dan Thompson, N8WKM
E-Mail: mail@miarc.com good luck......Jim

Jim2121

Stanford did some tests with Amplitude Compandored Sideband, but I don't think moto made any? I could be wrong. I know they hacked away at some motorolas to do this. An Amateur Radio BBS would get you more replies. try a search at the QSL.net -- Look for a Jim Eagleson. do a search for his call .......

Jim2121

sound wisdom! I wish you luck! regards, Jim

Jim2121

theres not much one can say when that happens. sorry to hear, you cannot leave a pack of smokes on the seat of your car down in phoenix. I carry my HT's with me. If I have more than one, its a good idea to go to a army/navy surplus store & pick up a carry bag that will work for you. hang in ther...

Jim2121

http://www.genesisworld.com/GSRDEntry.h ... nformation

I guess you already know about this site, list it here also...

Jim2121

MDC1200 Signaling (Encode/Decode)Features on LTR Zones

Here's a link to a user's guide: http://www.mymotorolaradio.com/pdf/HT1250LS.pdf

Jim2121

http://www.support.microsoft.com/?kbid=943144 Nice site, theres about 20 of us or so that did not get the Sept. MS updates/downloads, thanks to the August downloads. I had no Luck with the above page? Now I'm working with a MS tech via email... This sounds like MS major plan to do the total switch t...

Jim2121

I got a few PM's saying it was the LCD since it was not on the external monitor.
If it was on the ext. CRT that I plugged in the back, it would be the VRAM.
well just my luck... hope these LCD are on the bay... thanks for the replies!...Jim

Jim2121

the lines and patterns appear on the notebook LCD screen only, nothing on the CRT monitor I plugged in the notebook... So is this the video card? I have a feeling its a bad LCD? TIA?

Jim2121

where is this exsisting tower? just curious? Payson, AZ. only AM radio station has 3 towers with guys, 210' tall (site elevation 5000' AGL) drive 30 miles away & you can't pick it up. Its a headach ok. and when the Red FAA lights go out about every other month or so. Got to climb to change it ou...

Jim2121

very well put..right now I'm out of town on business. But the ebay route is the way to go, your right! Or find the broken stuff and see if I can use any of it... Dell wanted over $400. for a LCD replacement screen..LOL (I just wanted to see the quotes) don't know if its the Vram yet? I have an Ebay ...

Jim2121

don't forget to put a red light on top 1st. it would depend on where it is located? why 300'? No mountains around? if you had a mountain or tall building to mount an antenna. you would save a lots of $$$ on the tower alone, the line loss, the output power, the HOA's (if any that will object). but wi...

Jim2121

Sounds similar to, but not exactly like, a problem I sometimes have with my old Compaq Contura-series laptop. Do you see any change in the "patterns" on the screen if you open/close the cover several degrees while its running? My Compaq has strange lines on it's display sometimes because ...

Jim2121

check your PM's

Jim2121

hum! LCD or VRAM? well thanks for the tip James. Now I have to dig up a cable to hook it up to a CRT... I have 2 Dell notebooks, wonder if I can hook up the 5150 with a cable to the 2200 notebook? well its in its early stages. and this has been exposed to Arizona heat! will post back after we try ho...

Jim2121

I have this 3yr. old Dell Inspiron 5150. (came with a 30gig HD. I put in a western digital 80Gig) and transferred all the data via Norton Ghost. Anyway more & more the pic's on the screen are showing a grainy pattern, lines thru some pages & pic's...happens 4-5 times a week. running win xp (...

Jim2121

something simple would be "WordPad" unless you want to buy software ie: office, power point, (which I think you can download?)
don't feel bad I use a typewriter also, when it breaks I borrow another from the city. LOL
______________________________
member of AARP

Jim2121

There are still authorized "M" dealers/repair shops that will fix them in the Phoenix area... check your local directory -- NJ has several...

Jim2121

correct! either channel 1 thru 16 or it can display the Frequency as MTS2000des said!

mr.syntrx your slipping...too many hours?????

Jim2121

what thru me off was last time I hit that link, it said: for sale
I just called and they said GTS is in,

thanks for the info.......Jim

Search found 792 matches