Batboard

uman18

hey, thanks for that feedback! However, i do not see anywhere on the xts4000 where you would use a screw to secure the bottom adapter in place? Randy Open up the accessory cover, and the screw goes on the upper part of the connector. Looking at the radio, the display facing you, the port is on the ...

uman18

I know this is a little old, but for reference: I had an XTS4000 and I used an ear piece with it. Motorola Tetra MTH600 MTH650 MTH850 MTH800 Series accessories fit the XTS and have the screw to secure it in place. https://www.ebay.com/itm/Hand-Speaker-Microphone-Mic-PMMN4015A-For-Motorola-MTH600-MTH...

uman18

I have a Relm RPU3000A pre-BK radio. It uses EX500 Series Accessories. I have the serial cable for the EX500 and the pin out looks like it works, has anyone tried it? On eBay they sell the cable but would rather save the $$. I am also looking for the part number for the correct software, there is di...

uman18

I had about 25 surplus Maxtracs that came from the South Pole, Antarctic program. all were 136-162 split.

uman18

Look for a radio with a "J" instead of the "K" in the 4th spot of the model number like these: T04JLH9PW9AN you can go lower on the 146-174 radio but P25 wont work as you start going lower. /\ I'm looking to upgrade my VHF Astro Spectra in my truck to a XTL5000 once I come across...

uman18

An Astro Spectra "J" split is out there if you really want to use the ham bands. I run a "J" split on 144.xxxx P25 and works like a champ. They are harder to find but they are out there. "J" split covers 136-162mhz. Keep us posted with the install of your Quantar if you...

uman18

Maxtracs are still bringing in about $40-60 on ebay depending if complete with mic etc, and also depending condition. 32CH ones even better. Great for GMRS which seems to have become more popular in the last 2 years. The Spectras as well should bring in $40-60 also. Clean them up with water and a li...

uman18

The "trailer" connectors are called SAE connectors.

uman18

I have both pins and both connectors. PM me if you need some.

uman18

oh and you can use old printer cables, just make sure they are shielded. I have used them to extend the HHCH on mid-power w3's

uman18

Someone had made a hack where you can plug the HHCH into the radio and on the 2nd port (middle of radio through the handle) you run ign power/jumper and speaker.

I had emailed they user but kept getting emails rejected.
see post: http://batboard.batlabs.com/viewtopic.php?f=1&t=101488

uman18

Its a 4 pin plug right? I might have a plug and the pins, you crimp the wires....

uman18

SlimBob wrote:Does anyone have a part number for the plastic collar that goes on the switch/pot shaft and adapts to the rubber knob? I broke a pair.

post or send me a pic, i have hundreds or parts in a box.

uman18

I had about 600 of them form LBC UHF&VHF that I sold here, ebay and also at the TRW swap in LA in 2008-2009. I have a box still of mostly VHF. Maybe 1 WHCA and several w/ LBCF tags. I have 2 that I use for scanners in VHF till this date. Also had about 300 from Burbank, CA PD/fire but those had ...

uman18

Batman wrote:everyone i have are 4734a, anyone able to spare two B rev units?

I have several NTN8831A's for sale that will charge Saber, XTS and Jedi series battries. They are Tri-chem. $30 each shipped.

uman18

I have several bottoms complete I took off some Sabers. If anyone needs replacements.

uman18

Is it a Motorola OEM battery? I've found that aftermarket batteries do that. I have a battery that will do that when attached to the radio (radio is off) but when placed to charge without the radio it will charger no problem/

uman18

Most of these are working just fine...Thanks guys... But some now are giving memory allocation errors upon trying to reprogram and it stops the build in 07.01.00. Any ideas on how to correct this error? Thanks in advance guys. Dont know if this helps, but in the hundreds of the sabers i had at one ...

uman18

Need some info regrading radio use in Mexico. Im sending some radios to use in my family's ranch in Sept. Looking to send some HT1000's or HT750's. DOnt want to get them in trouble, so would like to know if anyone knows about what kind of freq i can use. I now frs radios are ok but are held to the s...

uman18

I have about 200+ saber II's. Send me a PM.

uman18

Its been a while since your post but here is the pinout.

1-CHC
2-Kill
3-A/H
4-Man
5-Audio
6-Audio
7-Mic
8-Shield
9-Vol
10-Bias(...?)
11-SWP
12-Wail
13-Yelp
14-PTT

i also have a 10ft cable if you need one later.

uman18

i have many Saber II's, let me know./

uman18

http://www.venturacountystar.com/news/2 ... /#comments

http://www.fcc.gov/eb/FieldNotices/2003 ... 813A1.html

uman18

I'll be going down to the TRW swap tomorrow in Redondo Beach to sell, i wasnt there last month but might of meet some of you the other 2 times i;ve gone in Dec and Jan. If anybody wants to see something in particular let me know.

uman18

Whats the softwear need for?

uman18

Need codeplug for a VHF 4 ch and also a code plug for a "S" split HT750 16 CH. please help!! email to useless_93041@yahoo.com

uman18

Looking for a code plug for a 4 ch "R" ht750 and a 16ch "S". Please help!!!

uman18

looking for a codeplug for a 16ch s version 450-512mhz. thanks.

uman18

need a code plug for an ht750 aah25sdc9aa2an. i looked on codeplugsupersite but they only have the low split.

thanks!

uman18

i bought a battery in september from a dealer...the code is 703 i forgot how to read the code and thought it was 70th week of 2003...i started to think, there isn't 70 weeks in a year. its a 3rd week of 2007.

uman18

Need a code plug for a VHF 16CH EX500 i picked up. R05.07.01 code plug version 01.00

useless_93041@yahoo.com thanks.

uman18

i have an 04 prerunner extra cab. i took out the trim where the 2 extra cig lighters are, right under the ash try and put a BC780xlt scanner and used one of the cig lighter wiring to hook it up and relocated the other cig light outlet to right below the shifter on the other part of the console. i al...

uman18

model aah25kdc9aa3an ver no r05.02.00 please help!!!

uman18

i primarly listen to VHF so i just got me a Motorola CDM1250 VHF remote mount radio for 350 on the e-pay plus i also use it for HAM. i was limted on space in my turck so my BC780XLT is now a base scanner. Its a good idea on the remote monunt for the 780 but damm too much. Before they were available ...

uman18

i just got a cdm1250, my radio shop will do programing for 80 bucks with alpha tagging, turn around time 1 week. i have a friend that has cps R04.00.00 and will do it for a 6 pack, now the question is the radio is R05.05.10 will it give him an error mesg, corup the codeplug or will it be able to pro...

uman18

When the CHP first started using the CUDA led Signal Master they had the one where the leds are all horizontal (the slimer signal master cuda-link below) those didn;t look so bright during the day time at an off angle from what i seen. Does anyone know if the ones used now like in the pic above from...

uman18

this the CHP's new set up with CUDA LEDS

http://www.policecaronline.com/Photos/C ... pce3n.html

Search found 37 matches

Re: XTS 4000 speaker mic

Re: XTS 4000 speaker mic

EX500 and Relm RPU3000A

Re: Maxtrac 144-174 split?

Re: Verifying Before Buying

Re: Verifying Before Buying

Re: Is there still a market for old Spectras & MaxTracs>

Re: Power cable for Astro Spectra

Re: Extension Cable for Speaker w/03 HHCH and XTL5K

Re: ASTRO Spectra W3 Control Cabeling

Re: ASTRO Spectra W3 Control Cabeling

Re: Need Astro Saber MVA power cable

Re: Motorola Saber Question

Re: Motorola Saber Question

Re: saber desktop rapid charger

Re: Astro Saber battery contact fix?

Re: saber desktop rapid charger

Re: Motorola Saber 2: *k Restore from 2k memory option

MURS Type freq in Mexico

Re: Need Part..Saber Secure Switch

Re: Unitrol Omega 90 Digital Siren/PA Documentation

Re: Saber rebuilding questions

FCC Catches over the air bully wanting repeater pairs.

TRW SWAP

Re: ht1250 convertacom

HT750 VHF 4 CH CODEPLUG NEED, PLEASE HELP!

code plug ht750

code plug needed for ht750

need codeplug for ht750 "s" split

VHF EX500 16CH CODEPLUG NEEDED

i have an 04 prerunner extra cab

need codeplug for 16ch vhf ht750

what i did...

cdm1250 programming question

CHP LED signal master

New CHP lights