Hello All,

Got a question trying to program a HT1250LS+ for an LTR Passport system:

Issue: Trying to program in a Passport LTR System.
I'm assigning all personalities and all "REVERT" selections,
but still get the following error message when
attempting to save the codeplug:

Revert Personality ...

Need part numbers for the following:

- HT1250LS Radio Service Software Manual
- HT1250LS User's Manual

Thanks
Son of Trido

Will the standard software for the HT1250 also work for the HT1250LS, including Passport???

Thanks
Son of Trido

This may sound like a simple question, but I'm wanting some expert advice.

Radio Flash Code for an Astro Saber III: 490108-584000-7

This should be a VSELP radio, correct? In other words, if it isn't CAI and isn't "ASTRO-Ready" it should be VSELP?

Thanks
Son of Trido

Which frequencies are going to be used for LAPD dispatch - are they the 484.xxxx frequencies or the 506.xxxx frequencies?

Ch1 Central 484.8125/506.7375
Ch2 Rampart 484.8375/506.9375
Ch3 Southwest 484.3375/506.9875
Ch4 Hollenbeck 484.8625/507.1875
Ch5 Harbor 484.2875/506.7875
Ch6 Hollywood 484.7625 ...

Looking for any VSELP Codeplug - just want to see the differences between VSELP and APCO25 programming.

A blank, initial codeplug would be fine.

I am looking for a Motorola codeplug for either the Memphis or Cleveland VSELP system.

Would like to do some investigation with the Motorola RSS on how the VSELP systems are programmed.

email: [email protected]

<font size=-1>[ This Message was edited by: Son of Trido on 2002-01-31 15:18 ]</font>

Another question relating to this...

Is there any way to determine CONVENTIONAL system ID's over the air?

Son of Trido

I have several conventional personalities programmed in my ASTRO Saber with RX only. However, they show up with the talkaround/direct icon "|-->" on the radio display. The channels DO NOT transmit, so I'm wondering what might be programmed incorrectly.

All are same frequency and were copied using ...

Thanks

Bad connection between radio and radio-rib cable. New one should be here tomorrow.

Guess it's time to order the service manual.

73's
Son of Trido

Need explanation, possible causes, solutions.

Back to the shop???

Thanks
Son of Trido

I had the opportunity to spend a couple of hours at the local Motorola Service Shop last Friday (a ham friend works there).

He was showing me some things related to trunked radio systems in the RSS. One thing he demonstrated was a stand-alone program called SKG - system key generator. Basically all ...

Wondering if the following is possible...

I've got a 470-512 Mhz Bandsplit ASTRO Saber II. A friend has the lower UHF bandsplit version. Both have same options, DSP, etc.

Is it possible to use codeplug from my radio in his AS LONG AS THERE's NO OUT-OF-BAND frequencies?

He's not wanting to take ...

Is there presently any way to decode talkgroups on ASTRO Conventional systems (i.e. non-trunked), such as using a data slicer circuit and software similar to the TRUNKER program???

All,

Thanks for the response. I had my doubts as to whether is was CAI or not.

Love this board - you guys are the best!!!

Son of Trido

Looking at buying a nice 800Mhz Saber III from a friend of mine.

Here are the firmware numbers from the radio: R.03.00.00 and I.03.04.03.

My guess is that this IS NOT a CAI radio.

Can anyone confirm just by looking at these numbers if it's even capable of CAI? He states he can't determine the ...

Junkyard Nut

Thanks for the info - one question, this applies both to TX and RX???

Thanks
Son of Trido

Can a Saber or XTS3000 be capable of both the APCO25 CAI and VLSEP modulation types?

Reason I ask - the UHF conventional ASTRO Saber II I have allows both modulation types to be selected in RSS.

Most of my interest is in APCO25 CAI, although a local utility uses VSLEP.

Thanks
Son of Trido

I think this has been asked before (maybe even by myself) but I can't remember the answer.

I've got an ASTRO Saber II conventional.
I'd like to be able to scan 28 channels at the same time. Is this how to do it???

Place channels 1-14 in Zone 1, Scanlist 1.
Place channel 15 in Zone 1, Scanlist 2 ...