Batboard

BFD319

Having trouble getting my Pyramid to work right, It will tx but it will not receive.
I have my svr200 hooked up to a low band maxtrac according to there website the closet radio i found was the Motorola Radius Series w/ 16 pin accy connector however i have a 32 channel low band maxtrac with 16 pin ...

BFD319

Looking to see if it's possible to take a xtl radio receiving in UHF digital encryption mode and rebroadcast it in analog UHF using the pin out of the radio

BFD319

Trying to get my LowBand Maxtrac hooked up to a Pyramid, does anyone have the settings I need for both the maxtrac and the pyramid. I check on the pyramid website and they only show for a Maxtrac Trunked or a Maxtrac w/o accessory connector.?

BFD319

Will have to let it sit and dry out a little longer and give that a try, thanks otherwise i'll send it out. Not sure if it old or new housing

BFD319

I have a 2004 Dodge ram, the easiest truck I have ever done. Nice big grommet under the console for all the wires, molding all snaps out and snaps back in. Also plenty of room to hide 3 speakers under the dashboard, and driver and passenger seat fit power supply and radio units.

BFD319

Working on a HT1250 the radio was dropped in water, it was pulled apart right a way and dried. problem now is it turns on and works fine, but the radio will not turn off. When you turn it off about 3 sec later it goes into a mode of on-off on -off until the battery is removed. anyone have any ideas ...

BFD319

Thanks for the help

BFD319

anyone no if on a new xts5000 do you have to request the channel announcement software or is this a standard option now in the radio,?

BFD319

Thanks I'll give it a try

BFD319

Looking to set up my laptop to do dual boot so I can use one computer to program radios. I have XP in the computer now can I just load 98 in and it will set up dual boot like that or do I have to erase everthing and start over with the 98 then the xp anyone ever do this, trying to avoided having to ...

BFD319

Anyone no what to do if this error ocurrs the book doesn't say anything about. THE FLASHKEY VERSION IS OLDER THAN THE VERSION IN THE RADIO?

BFD319

Speaking of flashcodes,if I add a new flashcode to a radio that is already programed will I have to reprogram it or will the flash upgrade just take with out changing the codeplug.

BFD319

Thanks for the help just double checked defently not an option quess you got luck on yours

BFD319

Does it decode the mdc automaticaly or is the option in the software on or off. what I mean is if it can decode id's wair in the cps do I find that option to be turned on don't see it anywair. in my 3000 it clearly states under display and menu ptt id id display.

BFD319

no clue, anyone able to add 14 voice files to my codeplug if I e-mail it.

BFD319

Thanks the radio will do alias id though but will only read it threw the emergency button not just a normal transmit of the radio

BFD319

THIS WILL NOT DECODE MDC ID CORECT?

Options Installed on this Flashcode:

100001-000002-5

Q806/G806 IMBE / APCO-25 Digital Operation
H35/G48 Conventional Operation
1B2 Future System Enhancement

BFD319

firmware R09.00.01 cps r09.00.00

following the help steps just can't get the cps to find the wav file so i can load it

BFD319

under features it's says
firmware R09.00.01 cps r09.00.00
H35-conventional system operation
Q806-astro digital operation
Q446- channel announcement

BFD319

firmware says n/a when i read the radio. I was able to click on the announcement button , had to restart the software, now just loading a file, following the instructions. can't find the file threw the cps, the file is in my pc but when you load voice file in will not see it becasue it's not a MVF ...

BFD319

FLASHCODE 100001-000002-5

BFD319

Trying to program the xts5000 for channel announcement, not having any luck. I can't click on the channel announcement option under radiowide in the cps. does something else need to be done first in order for this option to open up.

BFD319

Trying to hook up a Pyramid svr200 to a Maxtrac could anyone tell we what the settings on the Maxtrac have to be set on

pin 4
pin 6
pin 8
pin 9
pin 12
pin 14

BFD319

The tone thats heard on the radio after someone is done talking you get a short tone on the recieve radio not the tx radio

BFD319

Anyone no what the setting is on the radios to get the tone that gets sent over the radio after they rx a message on the fdny radios HT

BFD319

got it thanks anyway

BFD319

can someone tell me what software programs the MT1550 radio's

BFD319

THANKS

BFD319

Is it possable to instead of getting a # on the MDC ID dispay that it could display letters?

ex. ID: 1234 would read ID: TEST

BFD319

Thanks for the help

BFD319

Flashcode 100001-000000-7

BFD319

OK so this is what I need to read out the mdc id's H14/G114 Digital ID Display and this has to be reflashed into the radio correct.

BFD319

I have the XTS3000 model 2 programed with rss version 4. my ? is the radio will not read out MDC ID'S, so I don't have Q352/G352 Soft ID in the radio. Is this something that needs to be flashed into the radio or can I just download a new codeplug thats a model2 with soft id in it already and it will ...

BFD319

After doing some searching on the board here it was said that a Vertex VPL-1 cable will program a Pyramid Model SVR-200 Vehicular Repeater and the programing port for the SVR is found by removing the curcit board and the port next to the led's is the port to use not the port on the outside of the ...

BFD319

thanks for the link thats was helpfull. I have never modified a cable before. Are there and prebuilt cables to get this done that are out there.

BFD319

I have a low band maxtrac and a UHF Pac-Rat looking to make a cross band from Low Band to UHF is there a cable or can it be made to link these two together? I have the cable that came with the Pac-RT PAC to MaraTrac could this be modifided

BFD319

Forgot to add, to upgrade the software is that an actual adding of a part or just a program has to be downloaded to the radio? And if so just a program something someone might have to send me I can load in the radio thanks

BFD319

Thanks for the help. I don't believe I have that option in the radio. Under displays I have talkgroup-- display on ptt, and display on recieve

BFD319

I have a XTS3000 model 2 It does not read any ideas how do I go about upgradeing the radio to do this?

BFD319

XTS3000 model 11 unit will not read the ID how do I go about upgrading the radio to read them?

BFD319

I Have a 04 ram and used a Hava shield 10" consel fits perfect and that with the 4 wheel drive shifter of to the side. Could send you a pic if you want

BFD319

Thanks for the help sounds easy enough to do. Guess I can't use the ignition scene then, would have to keep the radio on all the time. Any help on finding the external alarm pin on a spectra either the low power or high power I have both in there. would be great Thanks again

BFD319

I have a spectra right now, MDC, QCII, DTMF doesn't matter just looking to see how this would be hooked up and what other parts I would need.

BFD319

Looking for info on trying to get my radio to remote start my truck. I have come across people talking about this on some post awhile ago. Any info or a place to start looking would be great.

BFD319

Hi. Thanks cowboy for getting those pictures up for me. The cupholder yea that defently sucks. I have the speakers mounted under the drivers side dash 3 seperate motorola speakers, plenty of room under there you do however have to turn the volume up a little bit higher but it works fine. This truck ...

BFD319

Just finished my install well for now of my 2004 Dodge Ram.

Hava shield 10" consel
1 VHF spectra
2 UHF spectra's
1 systems 9000 siren box with DEK head
1 6 push button switch box

2 1/4 wave black UHF antenna's on roof
1 1/4 wave blavk VHF antenna on roof

3 Whelen strobe power supplys
1-6 outlet ...

BFD319

thats a great job on those side mirros, I like to do something like that on my dodge ram gonna have to start looking for mirros that will fit now

BFD319

Thanks for all the input guys. I ended up going with 3 seperate 1/4 wave's drilled in the roof. Found black ones to match the truck so looks good and not very noticable

BFD319

looks nice alot of light, what kind of strobe pattern are you running looks good but very slow, unless it's just the vidio

BFD319

Is this something that needs to be enabled though in the programing of the radio. I have 2 other spectra's and this works but the 3rd won't seem to go into that test mode

Search found 75 matches

svr200 not recieving

rebroadcast encyrption?

Maxtrac/Pyramid settings

Re: HT1250 will not turn off?

Re: Easiest SUV for install

HT1250 will not turn off?

Re: XTS5000 Channel Anouncement Question

Re: XTS5000 Channel Anouncement Question

Re: Dual Boot xp and 98

Dual Boot xp and 98

PYRAMID TO A MAXTRAC

MT1550 SOFTWARE

MDC ID ALPHA DISPLAY?

XTS3000 ID?

Pyramid Model SVR-200--cable

MAXTRAC TO PAC-RAT

remote start with radio

just finished install 2004 dodge ram