Batboard

medicnurse

Trying to setup a EX560 to decode quick call for a fire department as a pager. The quick call alert type states none and no other selection are available.

medicnurse

yes they are set up as a repeated channel no "direct" frequency

medicnurse

Jim that is the Box that is grayed out and is unable to be checked.

medicnurse

trying to change the TA function on a xts5000 but the direct frequency check box is grayed out. Any help would be appreciated

medicnurse

escomm wrote:
medicnurse wrote:Is the receive pl dropped when in scan mode?
If you have scan configured that way, yes.

how do you know if it is configured that way ?

medicnurse

Is the receive pl dropped when in scan mode?

medicnurse

the check box was not checked thanks for the help guys.

medicnurse

when the repeater/direct function is used is the PL dropped off the receive side when in the direct mode? I was using my radio and could not hear the conversation. I know the PL tones are correct. The codes are different one for transmit and a different the receive side.

medicnurse

the FC tag and the Radio match however I have a read of the radio both pre and post "bricking". Do you think that is enough proof. serial and model numbers are the same on both co-plugs.

medicnurse

Well i have the found the problem. The original flashcode and the current do no match
the current flash code is
140001-000100-2
P25
multi key
just a q53 nothing else . Over Half of the original feature set is GONE!!!!
How do I fix it

medicnurse

flash code is 560001-001305-2 feature set is that is directly off the Radio information screen Q811 P25 digital conventional H869-multikey Q52 Federal government front panel programing enhancement Q947- packet data interface Q53-FCC Conventional Front Panel program and radio cloning Q667-ADP Encrypt...

medicnurse

I have a xts 2500 that was bricked due to power loss during programing. It had FFP as an option prior to going to the depot to be repaired. When the radio is read this option appears in the feature set, but will not show on the display after you wrote to the radio. How do I get this feature back? I ...

medicnurse

thanks

medicnurse

can you do the custom colors with the 2500 that you can do with the 5000

medicnurse

I have a xtl2500 and was wanting to match the color display on my xtl5000 is this possible even with a custom color display?

medicnurse

Thanks for the help I had some one sent me a new co plug and started over only took me about an hour to reprogram the radio.

medicnurse

Just got a new xts 3000 well new to me. I know I have made a programing error, because I get a solid tone when I try to transmit. The radio works well other than that. I have looked over the program several times but cannot seem to locate the problem. HELP!!!!

medicnurse

I need the part number for the adapter that goes between the speaker mic and the radio?

Don

medicnurse

Look at Ram Mount I use in my 2005 tundra to hold radios it was designed as a laptop mount

medicnurse

The radio was bought off ebay the guy said he got it off someone on the board.

medicnurse

Is there a way in the cps to adjust the brightness of the display it seem a little dim and the radio has FPP as an option how to I change some of the zones back to "normal"?

medicnurse

Nice work, i have a 05 double cab would like to see a few more pictures of the wiring and where everything else is located as far as power block, wire coming off the battery, relays,and where the rest of the remote mount equipment is located.

medicnurse

Thank you for all the help. I am still a little confused with the relay how to wire it and where it hooks into the fuse block. Right now I have a 4 gauge wire coming off the battery and into a 100amp circuit breaker and then to the fuse block. I am currently turning the radios on and off as needed. ...

medicnurse

I have a three radios to install Motorola xtl 5000 uhf Motorola Mcs 2000 vhf Icom 208H and I want to be able to turn them off and on with the key I currently have a 4 gauge hot wire coming in to the truck and into a fuse block for the current setup . I would like to have some way to turn off the rad...

medicnurse

http://www.powercallsirens.com/dx5.htm

medicnurse

Does any one know how to improve audio quality with just the software of the cmd1250

medicnurse

Thank you for the information. One other question with the audio it seems to extreme either to too low or to loud no happy middle

medicnurse

I have a new cmd 1250 on a remote kit. All audio still come from the front speaker even with the external speaker hookup

medicnurse

need to know if it is possible to run a duad band uhf/ vhf on a single uhf 1/4 wave antenna with a diplexer.

medicnurse

Does anyone know where i maybe able to find the pinout for a kenwood 30 series for audio and for ignition ?

medicnurse

i have a toyota tundra and am looking at both sti-co and comprod need help choosing, but it lookes like both are well liked and disliked at the same time

please help

medicnurse

need some advice on antenna spacing want to drill 3 antenna 1celluar antenna 800 mhz antenna #2 is a dual band commerical antenna 150/450mhz antenna # 3 is a dual band 144/440mhz. will be going on a 2005 tundra extra or double cab. also any one know where i can find a small console for this truck. I...

medicnurse

any one have pictures of a toyota tundra install? I have seen the ones on the boards need other ideas

medicnurse

any one make a console for a toyota tundra with buckets seats and a center console need to mount a kenwood 30 series and a tm-d700a
and a touch tek switch panel

medicnurse

Any one have pictures of a toyota tundra access cab install. i have seen the ones on the board already of a single cab but no access cab or double cab. need help
kenwood 30 series and a tm-d700a
and of course lights and a siren. Any one installed strobes in the front marker lights

medicnurse

any ideas on how or where to mount the control heads for the radios. I am going to use a TouchTek VI Switch Panel to control my lights. however i need help with the placement of and how to mount the controlheads for the radios as well as the speakers. Any one have pics of installs on tundras?

medicnurse

so does any one else have an thoughts about how hard this install will be and can i get away with just with one antenna with the cross band repeat functuon in pace

medicnurse

Has any one done a recent install on a toyota tundra sr5 access cab? I need help with placement.I have all this in a ranger now,but need a bigger truck.The toyota's it will have a bucket seats and a console. I need to place a kenwood 30 series dualband vhf/uhf single head and a icom 2720h 146/440 du...

Search found 38 matches

EX560 QUICK CALL DECODE

Re: CPS options grayed out

Re: CPS options grayed out

CPS options grayed out

Re: XTS 5000 T/A function

Re: XTS 5000 T/A function

Re: XTS 5000 T/A function

XTS 5000 T/A function

Re: XTS2500

Re: XTS2500

Re: XTS2500

XTS2500

Re: display color xtl2500

Re: display color xtl2500

display color xtl2500

Re: Xts 3000

Xts 3000

xtS2500I part number

Re: Nissan Xterra 2006 w/Gamber Johnson laptop mount

Re: XTS2500I display

XTS2500I display

Re: 03 Tundra Install

Re: power for multiple radio install

power for multiple radio install

CDM1250

dual band antenna

kenwood tk-730/830

Antenna Help

pictures for toyota

console

2005 toyota tundra

2005 toyota tundra