Batboard

racerman1cars

on a APX portable, what does XE mean,

racerman1cars

Hi, Is the handheld control cable the same for a regular Spectra and an Astro spectra?
Thanks

racerman1cars

Ok, Thanks, any idea of what series of radios?

racerman1cars

Hi, I bought a bow of stuff and in it were A RLN4514B and a RLN 4515A, i was wondering what these are and what they are worth.

racerman1cars

I like many on here had great dealing wit KO, he was great to deal with and went the extra mile. He will be missed, rest in peace my friend

racerman1cars

Why don't you get a 900 johnson 5100?

racerman1cars

Thanks for the answers guys, Wowbagger That is the method I am going to use, a guy here in town is the one that said use anchors in the concrete, that would 12 studs comming out of the concrete. Where can I get the sacrificial Anode?

racerman1cars

Hi, I have 60' of tower: 2-20ft sections and 2 10' sections. i was thinking about taking a 10' secion and putting in concrete 4' deep as per rohn.some one mentioned a concrete slab with j bolts to mount the legs to, that doesn't sound as safe a 4' section in concrete. Any thoughts on this?
Sreve

racerman1cars

I know this is OT, but I can't find out what a 20 foot section of 65G weighs, anybody know?
Steve

racerman1cars

Hi All, I bought a Astro from that auction site, it was supossed to do digital, [does not] after a discussion with a few members it was determined that I have a VSLEP radio. Is there anybody on here that could flash the Vocon? I have 3 other vocons too, hopfuly some one can make one of them do digit...

racerman1cars

Hi, Friend of mine mounts a flange mount so239 on the side where the dead space is.
Steve

racerman1cars

Hi, I have a Edge ultra complete some one pulled all of the wiing out of it! I was wondering if some one might have a wiring diagram? or some one here in Ky might have worked on one before. any help would be welcome.
Steve

racerman1cars

The 4 after the W means it a w4 head,[the head with rotor knobs for chan and off on volume].

racerman1cars

Hi, You and Jim are right on, I used the factory grommet and went in above the wiring. worked like a champ.
Thanks
Steve

racerman1cars

Hi, I am looking for a place on the fire wall to drill a hole and run a piece of # 8 from the red box under the hood to the inside of vehicle. vehicle is a 2006 Chevt Silverado ext cab.

racerman1cars

Hi, I just got a 2006 Chev ext cab z-71 and was wondering where the best place on the firewall to drill and gromet a hole? I had a 2005 and it had a flat place on the fire wall beside the steering colum, but this truck does not seem to have the same area.
Thanks
Steve

racerman1cars

PM Sent

racerman1cars

Hi, How much for a the accy cover and a belt clip?
Steve

racerman1cars

Hi, Does the Xts 3000 use the same accy cover and belt clip as the Jedi ?
Steve

racerman1cars

I'll be there again. selling Moto toys.
Steve
K4GFN

racerman1cars

+1 for the power switch.
Steve

racerman1cars

Hi, Yes that is data, also used around here for water level. Our neighbring county used vhf Ht-1000's with a modified convertacom for powerand data transmission.I wished when they junked them I would have gotten one.

Steve
K4GFN

racerman1cars

I almost bought one from them, but he said it had no tags so he didn't know the freq. Well it is good to know so mo one else gets ripped off.
Steve

racerman1cars

I too got Astro Spectra from the scumbag "trump" said nothing was missing, guess what? no vocon.I contacted him and he said he didn't about radios.
Steve

racerman1cars

I am not swapping parts around for the X9000, I am going to change the firm ware chip to make it work with my Astro.
Steve

racerman1cars

No the head won"t work on my working Spectra,but it works perfectly on my uhf X9000. I do have another 1063 head that works on my vhf Spectra. the 1063 head that don't work on a Spectra, I am going to try and convert it to a W9 by replacing a chip to use on my uhf Astro Saber.

racerman1cars

Thanks guys for the replies. I have another question I have a 1063 head it works on an X9000, but not a Spectra. I thought the 1063 was a Spectra head. Can it be changed to work on a Spectra?
Steve

racerman1cars

Hi, The radio acted this way when I got it. It is on freq and puts out 100 watts.when changing modes you hear the beeps. just no TX or RX audio thru the sevice monoitor. I took the cable and head off of my uhf setup and still no audio. Mike the X9k for parts is a T43.
Steve

racerman1cars

Hi, I have a Vhf 100 watt X9000, it has no receive or tx audio. What part should I look at? I don't have a manual. I an getting a 50 watter pparts radio hoping to find which board to swap.
Steve

racerman1cars

The correct # is: 1073D
Steve

racerman1cars

Hi Gary, There is a place here in Ky near Bowling Gren called Auburn Electronics [it is Auburn, Ky] that does service monitor repair.
Steve

racerman1cars

Hi All, Can a regular Spectra head# 1073 be made to work on an Astro Spectra? there is a guy around said you can change a chip in the std head and it will work on a Astro.I think he is wrong, but maybe I am.
Steve

racerman1cars

I am also pretty sure they were made in Plantation, I kmew a coulpe of laddies that worked there and I remember them working on portables..
Steve

racerman1cars

I will be there [again], tickets arrived today. Will be setting up Space # FE 3015.
Steve

racerman1cars

I know this is OT, but I couldn't find an awnser on google. What does the 96 series edge matrix board do?
Thanks and Merry Christmas..
Steve

racerman1cars

Hi, A friend of mine in Tenn has some 29 meg [10 meter] Maratracs.
Steve

racerman1cars

Hi, I just received a 110 Watt uhf Q split radio,I have acess to a range 2 438-470 [or so] Digital vocon. will this low split radio go up to 462 with the r 2 vocon? or will components needs to be changed in the radio?
Thanks
Steve

racerman1cars

Will, What does the HLE6039C translate to?
Steve

racerman1cars

I bought a Spectra,Thanks id: T84GXA7HA9AK at a hamfeast a while back some one said it might be the useless gov't split. I tried to power it up and it says something about a security box needs hooked up. will the chassis # id the split? it is: HLE6039C.

Steve

racerman1cars

I found his addy.
Steve

racerman1cars

I bought radios from him and met him a Dayton. A really nice guy I lost his e mail addy, so lonnie if you see this please e mail me.
Steve

racerman1cars

Hi, Is MPL standard on an AS like on a regular Spectra or is it a flash option?
Steve

racerman1cars

It is usually a bad battery.
Steve

racerman1cars

Yes You can use the A9 head to activate the siren tones, that is how I got mine set up!
Steve

racerman1cars

Hey All, I know this has probablly been covered but a quick search didn't yeild an answer, so here goes. I picked up a T84 Spectra at Dayton, I tried to program it and got error 81, can not access the Ext security housing. Am I screwed? what if I pull the MLM board out of my working D44 and put it i...

racerman1cars

I will be there, first time in 20 years... will be coming up Thursday to check into Besst western
Steve K4GFN.

racerman1cars

Does anyone have a list of freqs for the Dayton Hamvention? maybe some Astro freqs
Thanks Steve

racerman1cars

All, I just got a new "toy "a R2002C service monitor and am looking for an instruction manual. I know that it is probablly NLA,looking for a copy or?
Steve

racerman1cars

All, Are there any power supply issues with the R 2001 or the R 2200 series service monitors? Also has anybody on here used a Stabilock 4040?
Thanks
Steve

racerman1cars

Thanks Terry that is what I was looking for!
Steve

Search found 200 matches