Batboard

firebug24

Looking for the following Minitor II pager filters/reeds :
1395.0hz
533.9hz
Have several for trade also
Need at least 2 of each
thanks
steve w

firebug24

Hello all Well I got a 2014 Ford SUV Police Interceptor today ( my first one) and have the worst time trying to find a spot to get 2 antenna cables thru the firewall !!!! Spent way too many hours researching to find out very little information. The radio power connections are suppose to be under the...

firebug24

Take it down !
thanks

firebug24

Hello All
Well I received my NEW Minitor VI pager yesterday and doing some testing. Let you all know if it's worth the money !
steve w

firebug24

Hello all

I looking for info on the installation of Kenwood 45 watt radio in the 2014 Chevy 9C1 Impala. Has anyone done any of these cars and if so, any major troubles >>???

steve w

firebug24

Hello all
Looking for info regarding Minitor V pagers - can they be programmed to operate & function on digital systems ?
thanks
steve

firebug24

I'm using R19.01.00 software the lastest from big M
steve wendling

firebug24

The radio is shutting off during TX . The medic has to power up the control head to finish the medical consult.
I set the TOT at 120 seconds but thinking (if this is the problem then I would increase the time more).
steve wendling

firebug24

Hello all

I have a PM1500 UHF radio (remote head) that has been shutting down (power down) half way thru medical consults. The radio powers up correctly after that.

Any help is appreciated !!
steve w

firebug24

Thanks for the info

Yeah, I'm looking to add a 2nd external speaker for a fire engine at the pump panel. Pins 24 & 25 which is + & - ???
steve w

firebug24

Hello all
I'm looking for info regarding the pinout for an external speaker on a PM1500 !!
any help appreciated
steve w

firebug24

Thanks for info !!!
Looks like a marine antenna is what I am going them.
steve w

firebug24

I'm thinking about a Shakespeare 36" marine antenna (model # 5240-R) with the rail mount. I believe this might work well.
steve w

firebug24

Thanks for the info !
The antenna is for portable radios but just checking to see if it might work or not.
steve w

firebug24

Hello all

I have a customer who wants a VHF rubber duck type antenna for their VFD ATV. I'm using a Antenna Specialists Part#
HP12 . The radio will be a 45 watt M1225. Anyone have any ideas if this will work ?????
thanks
steve w

firebug24

I contacted the tech at Motorola and he advised to contact the control on both red connections. I'm using an Astron 35M power supply and still won't turn on !!!! I've tried holding the F2 button while powering the radio up but only get a brief message "ignition on"\. Anyone got any other i...

firebug24

Bump !

firebug24

Hello
I'm new to this radio and need some info regarding the connecting of the control head cable to the radio. It has 3 white connections & one red connection. Which is for one control head ? And does this radio require the control head to be powered up ?
thanks all
steve w

firebug24

So is it OK to charge the same IMPRES batteries between the 2 chargers ? V3.4 on the 4114AR & V3.9 on the 4111AR .
steve w

firebug24

Hello

I like to know what's the difference between the 2 Motorola chargers : 4111AR & the 4114AR ????
I would like to use them to charge a NTN9858C IMPRES battery but Motorola doesn't state the this battery can be used in 4114AR charger ??????
thanks
steve w

firebug24

Thanks to all

I will try rebooting the program and see what happens. Yes, I'm aware of the USB / serial bus issues. It worked on all the rest of the PM1500 radios. I have the latest program from Motorola also
steve w

firebug24

Recently I was tasked narrow banding about 15 PM1500 VHF radios and found one unit that myself & another person could not get it to read or write ????/
Anyone have any ideas ?
thanks
steve w

firebug24

Hello

Would anyone have RJ45 pinout to DB25 connector for this setup ?
thanks
steve w

firebug24

Sorry Guys J11 plug handmic is what I was referring to. Anyways, According to the DB25 pinout on the PM1500 radio I need to connect the handmic to this DB25. I need to know which handmic pins go to which DB25 connector. I have 4 fire engines that want speakers & mics at the pump panel. Also, Wou...

firebug24

Anyone know what the pinout would be on a CDM1250 mic to match the DB25 inputs ? I'm going to use 8 pin speaker mics (motorola CDM type) but dont have any ideas which mic wires shoud be connected .
HELP please
steve w

firebug24

Hello all

I installed a PM1500 in a fire engine and need to add extra speaker & mic connections at the pump panel.
Any help is appreciated !!
thanks
steve w

firebug24

Thanks FD Captain !!

That worked ! I'm new to these radios and need alot of help. Guess I could call 911 (you think)

thanks
steve wendling

firebug24

Hello all

I have an issue with a XTS2500 when it starts up and within a second or so reads " Key Fail" then resumes as normal.
Help Please !!

steve w

firebug24

Thanks

What your best guess on a fix for this ?
steve w

firebug24

Hello all I'm also new to the PM1500 radios and just installed a dual head in a new ambulance. I was told the radio was corrected programmed for the dual head setup. I'm getting an error message "FL 01-90 remote head maintenance issue". I spoke with Motorola tech and he advised tryong to r...

firebug24

I'm thinking that the dc power supply isn't giving enough power to the heads .
steve w

firebug24

Hello all I'm in need some of the wonderful techs out here ! I installed a PM1500 VHF dual head radio today and I'm gettting the message " FL 01-90 then says "remote head maintence" I was using a ac to dc power suppy to power uo the heads. Any ideas !!! I have a new ambulance awaiting...

firebug24

Thanks all I called Motorola and asked one of their techs. He had a part # but couldn't tell me if it was a MOT 1 or a 2135. So I went to my VFD and found out it takes a 2135 key. Well another VFD needed to remove their radio and asked me if I had key for one. I run Code 3 Communications, I usually ...

firebug24

Hello all

Need to know which key unlocks a PM1500 mobile radio ???

HELP

steve w

firebug24

Hello all

I had problems sometime ago with the oven light going out after a few minutes and haven't used it for about 3 months. I pluged into the AC and immediately blew the fuse.

Any ideas ???????

thanks
steve w

firebug24

Where to get the connector plug and pins !
steve w

firebug24

Hello all

Im looking for anyone that has used or made an accessory connection on the Minitor pager chargers. I have the pinout info just dont know much about it.
thanks
steve w

firebug24

Hell all

I need some info on this cable : HKN4032A-1
thanks
steve

P.S. will any Mitrek control head cables work on maratrac radios ?

firebug24

Hello all

Im looking for info on HKN4018A cable. I found out its a cable for Mitrek radio but don't know if its a 1ch or 4ch cable ??
thanks
steve

firebug24

Hi all
Just got in a maxtrac D43 model that was supposely had a lightning hit. Powers up but no on beep. Programmed ok but no RX either..

Anyone got a clue on this radio to get fixed ????
thanks
steve w

firebug24

Hi all

Im looking for info on the cable that connects a maxtrac radio to a remote mount control head.

thanks
steve

firebug24

Hello All

I would like to know how easy or hard it might be to repair minitor II pagers that the squelch button doesn't work correctly. When you push the squelch button it doesn't open up. Everything else on the pager work properly.

Steve w

firebug24

Just lighting the TX meter, all the connections tested good and no cable problems. At this point the antennas are as far apart as possible.
steve w

firebug24

Hi all

I have a issue between 45 watt VHF radio & CB radio ; When you transmit on the VHF radio it opens the CB radio transmit light ( Cobra 29 LTD Classic and Motorola Maxtrac 46 watts) \ Antennas are about 3 feet apart too !!!!

Any HELP would be appreciated !

steve w

firebug24

Hi all

I have a Motorola AVA model NTN7227C and like to know if this will work correctly with the regular Sabers & System Sabers ???? The front of this AVA says ASTRO !!!!!
thanks
steve w

firebug24

Hello all I have the pinout from batlabs but would like some help with connecting the following : They want to connect this radio to the siren system (external speaker mode) and another speaker near the rear of the vehicle. IS THIS POSSIBLE?? if so which pin positions should I use for this setup ???...

firebug24

Finally completed and excellant install !
2 years old and still working perfectly !!!!!!

Im ready for the next job
steve w
western maryland

firebug24

Thanks for the response
Anything special I should before connecting the mic & speaker
steve

firebug24

Hello
I have a need to add an external speaker & mic to a maxtrac.
Can this be done ???? my fire department would like to add these items to the pump panel area.
thanks
steve

firebug24

Hi all

Im looking for help with replacing the round memory battery in a Bearcat 890XLT scanner. Appears soldering won't work !!!!!

Anybody got a trick with this >???

thanks
steve

Search found 71 matches