New firmware for the Minitor VI (July 21 2014)
Available on MOL Resource Center at:
> Software > Paging > Firmware/Flashing
The Firmware Version is R01.04, but the name of the Upgrade Kit is R01.05
Search found 81 matches
- Fri Sep 12, 2014 5:04 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI Firmware Upgrade - D0014
- Replies: 7
- Views: 9425
- Wed Jun 18, 2014 9:33 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI PPS
- Replies: 1
- Views: 6276
Re: Minitor VI PPS
New on MOL... Minitor VI PPS R01.07 (10 June 2014)
Found in Resource Center > Software > Paging > Service
Found in Resource Center > Software > Paging > Service
- Tue Jun 10, 2014 7:54 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI (6) released
- Replies: 52
- Views: 37493
Re: Minitor VI (6) released
Anyone else notice reduced sensitivity as compared to a Min5? I did some limited testing after programming a few 6's and felt they didn't receive as well as the 5's do. When at CPE this week, one of the friendly dealers near us said they did some extensive testing and feel they 6's are at least 3dB...
- Wed May 14, 2014 6:39 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI Firmware Upgrade - D0014
- Replies: 7
- Views: 9425
Minitor VI Firmware Upgrade - D0014
New on MOL today, 5/14/2014, Minitor VI Firmware Upgrade Kit - D0014 Look in Resource Center > Software > Paging > Firmware/Flashing > Minitor VI Firmware - D0014 There is a separate PDF file listed that is the Release Notes for the Firmware Upgrade. Instructions for using the upgrade are provided w...
- Wed Apr 02, 2014 8:34 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI (6) released
- Replies: 52
- Views: 37493
Re: Minitor VI (6) released
Updated Minitor VI PPS released... R01.05 Available here: http://www.motorolasolutions.com/web/Business/Products/Pagers/Minitor_VI/Software_Download/Minitor_VI_PPS_R01_05.zip Version R01.05 fixes the following: Version R01.05 - March 2014 - Extend out of band frequency to +/-1MHz on all models. Vers...
- Tue Feb 25, 2014 8:23 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V Engineering mode
- Replies: 71
- Views: 71186
Re: Minitor V Engineering mode
Did you also change it from non-Stored Voice to Stored Voice?rpennington wrote:Everything seemed to work, however when i changed my pager from a single to a 2 channel when I turn it on it emits a long tone that never stops. How do I fix that? Anyone know?
- Fri Feb 21, 2014 5:23 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI (6) released
- Replies: 52
- Views: 37493
Re: Minitor VI (6) released
Minitor VI software... If you do not have a MOL account, you can obtain the software free at: http://www.uccwireless.com/Minitor6.htm We have been informed that there is a problem with the Minitor VI programming cradle. The programming cradle is currently on backorder. One user is reporting that the...
- Thu Feb 20, 2014 11:15 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI (6) released
- Replies: 52
- Views: 37493
Re: Minitor VI (6) released
Now that Motorola has abandoned low band paging, and the Minitor 5 last order date is 28 Feb (according to my local dealer), does anybody know if a quality low band pager is being manufactured by anyone else? New Low Band Minitor V pagers should be readily available for 1 or 2 years. The national d...
- Sat Feb 08, 2014 9:48 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI (6) released
- Replies: 52
- Views: 37493
Re: Minitor VI (6) released
MSRP (List) Pricing for the Minitor VI UL Models - VHF & UHF 1-channel $531.00 5-channel $588.00 Non-UL Models - VHF & UHF 1-channel $468.00 5-channel $523.00 Omit standard charger & add amplified charger $80.00 Standard warranty is 2 years. Option to add 1 year (3 years total) $20.00 Op...
- Tue Mar 20, 2012 8:15 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V Narrow Banding
- Replies: 3
- Views: 1916
Re: Minitor V Narrow Banding
You should not narrowband your pagers prior to the paging transmitter being narrowbanded. This results in audio problems and the possibility of the pager not decoding. Once the paging transmitter is narrowbanded, your Minitor V's will work just fine in the wide mode until you have a chance to change...
- Sun Mar 18, 2012 8:16 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor 5 SV to NSV
- Replies: 3
- Views: 1913
Re: Minitor 5 SV to NSV
Jamie, I don't believe your problem is related to SV or NSV. If you have the mode switch position programmed for "Monitor F1" and the pager will not monitor in that switch position, you have a defective pager that needs to go to the depot. The Minitor V has a known problem where it will no...
- Fri Mar 09, 2012 8:05 am
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: MTR2000 X269 Spectra-TAC Status Encoder
- Replies: 5
- Views: 1086
MTR2000 X269 Spectra-TAC Status Encoder
Need someone to provide the Motorola Part # for the Spectra-TAC Status Encoder module for a MTR2000, option X269. I have located a MTR2000 receiver required for a project and need to determine if it has option X269. The person with the receiver needs instruction on how to make the X269 determination...
- Fri Feb 10, 2012 7:50 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V off duty programming not taking
- Replies: 4
- Views: 2284
Re: Minitor V off duty programming not taking
What Release of the Minitor V software are you using? The early versions had problems with the On/Off Duty programming. Current software is Version 1.7.2 Available free here: http://www.motorola.com/Business/US-EN/Business+Product+and+Services/Two-Way+Radios+and+Pagers+-+Business/Pagers/MINITOR+V_US...
- Wed Jan 04, 2012 7:15 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor 5 constant low audio problems
- Replies: 5
- Views: 2416
Re: Minitor 5 constant low audio problems
Is your "Fixed Alert" set to ON ?
When you have the failure, will the volume control vary the low audio level or is the audio level constant.?
Bob
When you have the failure, will the volume control vary the low audio level or is the audio level constant.?
Bob
- Mon Jul 04, 2011 4:46 pm
- Forum: Motorola Digital and Voice Paging
- Topic: History of the Minitor II --- Does anyone know dates?
- Replies: 6
- Views: 2423
Re: History of the Minitor II --- Does anyone know dates?
Good information from RFguy...thank you! A little modification to the Minitor II dates. The first Minitor II's were manufactured in 1986... The last Minitor II's were manufactured in the first quarter of 2000. Those were Low Band and UHF. The VHF High Band Minitor II's were discontinued prior to Low...
- Tue Mar 15, 2011 9:52 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor vs Director question
- Replies: 1
- Views: 1575
Re: Minitor vs Director question
When I look at the eBay listing you reference, the seller lists the model as H03ZVC2468AC... This model number is a VHF High Band Director II SV. With the Director II SV, vibe was standard. Without contacting the seller, I would say this is definitely NOT a Minitor II SV. You can add vibe to a 1-cha...
- Sat Mar 12, 2011 6:23 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V will NOT monitor channel
- Replies: 8
- Views: 2970
Re: Minitor V will NOT monitor channel
This is a known problem to Motorola. Via MOL, open a case about the problem (Minitor V - No Monitor function) They will give you a "SP Authorization Number" to return it to the Service Depot for a free repair. If you do not have a Motorola On Line account, the dealer you purchased your Min...
- Sun Mar 06, 2011 9:24 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor Band Split Question
- Replies: 2
- Views: 1660
Re: Minitor Band Split Question
We currently have one Minitor IV, Non-Stored Voice, 2-channel, for the 143-151 MHz. split. It is not in its original box but appears to be NOS (new, old stock). With a fresh set of NiCad batteries (Sanyo), and new in the box NYN8346C charger, programming, and warranty... it is $175.00 plus shipping....
- Sun Feb 27, 2011 6:43 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V will NOT monitor channel
- Replies: 8
- Views: 2970
Re: Minitor V will NOT monitor channel
We have seen this problem several times. We currently have 5 VHF SV Minitor V pagers in the shop with the problem. All 5 pagers are from the same Lot / Order. Clearly a manufacture / component failure issue. This problem presents a safety issue for the user. The user receives the original alert and ...
- Sun Jan 23, 2011 1:12 am
- Forum: Motorola Digital and Voice Paging
- Topic: Dead Minitor V
- Replies: 6
- Views: 2604
Re: Dead Minitor V
Have a couple in Min V pagers that are dead when the battery is attached ( batteries are new & charged ), but pager will power up when in the desk charger base ( with or w/o battery ). Any thoughts on this problem? Tron Unfortunately, this is somewhat of a common problem with the Minitor V. The...
- Fri Dec 03, 2010 10:28 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V Frequency Spread
- Replies: 2
- Views: 2011
Re: Minitor V Frequency Spread
After some testing, it appears that what you want to do can be done with the proper Minitor V and a little help from a software guru here on the Batboard. Your Minitor V on 470.3875 should be the H Bandsplit which is 470-477.9975 That Bandsplit will not work for your frequency spread. The RF board w...
- Thu Oct 28, 2010 7:46 pm
- Forum: Motorola Digital and Voice Paging
- Topic: advice on Minitor V
- Replies: 14
- Views: 3641
Re: advice on Minitor V
I would recommend that you try one of the following antennas with your Minitor V Amplified Chargers... Larsen Model KD14-450-HW2 or Laird Technologies Model G450BN These are 1/2-wave Rubber Duck type portable antennas My first preference is the Larsen model. You will also need a BNC Female/BNC Male ...
- Wed Sep 22, 2010 3:01 pm
- Forum: Motorola Digital and Voice Paging
- Topic: MinV Priority Scan
- Replies: 2
- Views: 1791
Re: Minitor V Priority Scan
What options are selected for the Mode Switch position that you are using when you are scanning both channels?
Also what UHF sub-band is your Minitor V? (What information is on the small label on the back of the pager)
Bob
Also what UHF sub-band is your Minitor V? (What information is on the small label on the back of the pager)
Bob
- Sun Sep 19, 2010 7:57 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V Monitor Mode
- Replies: 3
- Views: 2164
Re: Minitor V Monitor Mode
I'm afraid it is time for your Minitor V to take a trip to the Motorola Service Depot. We have seen a number of Stored Voice Minitor V's that exhibit your pager's symptoms. If yours is like those that we sent to the service depot, in addition to the no monitor function, when the proper alert tones a...
- Mon Aug 16, 2010 10:28 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Narrowband Minitor IV conversion?
- Replies: 3
- Views: 2169
Re: Narrowband Minitor IV conversion?
I don't really expect anyone to offer a narrowband conversion for the Minitor IV. For most applications, the current Minitor IV works just fine on systems using the 12.5 KHz. (narrow channel) specs. I have approx. 50 Minitor IV's in service in "narrow channel" systems. Most have been in se...
- Fri Aug 13, 2010 6:12 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Minitor Replacement parts- potentiometer/volume pot
- Replies: 6
- Views: 1350
Re: Minitor Replacement parts- potentiometer/volume pot
It didn't show up in the search because Motorola's description for the item is: " VOLUME/ON/OFF SWITCH" The item description does not contain the radio name the part is for, in this case, Minitor IV. This practice is common with Motorola part descriptions. You can find the part described a...
- Wed Aug 11, 2010 9:56 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Minitor Replacement parts- potentiometer/volume pot
- Replies: 6
- Views: 1350
Re: Minitor Replacement parts- potentiometer/volume pot
The Minitor IV volume control ON/OFF switch is Motorola Part No. 4080384S17 Other than the speaker, the next source of a low audio problem is often the volume control. Beyond that, I recommend sending the pager to Complete Wireless Technologies, http://www.compwiretech.com Hope that helps! Bob, CLAR...
- Wed Jul 28, 2010 6:52 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V pager ordering delay
- Replies: 4
- Views: 2176
Re: Minitor V pager ordering delay
I received information that Motorola expects to be shipping Minitor V's by the 3rd week of August. Here is our current inventory of New Minitor V's (these have the standard charger): 1 - 33 to 37 MHz., Stored Voice, 2-freq. $399.00 1 - 37 to 41 MHz., NSV, 1-freq. $329.00 1 - 37 to 41 MHz., NSV, 2-fr...
- Wed Jul 28, 2010 6:33 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V pager ordering delay
- Replies: 4
- Views: 2176
Re: Minitor V pager ordering delay
If we can help, we do have New Minitor V's in stock for most of the popular models and frequency ranges.
We also have several like new demo units.
Email or PM us with your requirements and we will check our inventory and get you a price.
Thank you!
Bob, CLARKCOMLR at AOL dot COM
We also have several like new demo units.
Email or PM us with your requirements and we will check our inventory and get you a price.
Thank you!
Bob, CLARKCOMLR at AOL dot COM
- Wed Jul 28, 2010 6:18 am
- Forum: Motorola Digital and Voice Paging
- Topic: Motorola Minitor IV Repairs
- Replies: 2
- Views: 1733
Re: Motorola Minitor IV Repairs
For Minitor IV's that we cannot repair, we use Complete Wireless Technologies (formerly The Pager Clinic)...
www.compwiretech.com
We are very pleased with their service and price.
Bob
www.compwiretech.com
We are very pleased with their service and price.
Bob
- Tue May 18, 2010 10:38 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Motorola Minitor 4
- Replies: 4
- Views: 1084
Re: Motorola Minitor 4
Hello all im not having any luck finding a minitor 3 recasing kit,is it possible to recase a minitor 3 with a minitor 4 recasing kit? Thanks Ron UCC Wireless, http://www.uccwireless.com, will have aftermarket Minitor III housings available very soon (late May or early June). They are mentioned on t...
- Fri Apr 23, 2010 9:00 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor 5 Volume Control
- Replies: 4
- Views: 2213
Re: Minitor 5 Volume Control
Yes, they do work for the Minitor Vn3obl wrote:the part numbers on this guys website comes back to minitor 4 knobs. do 4 knobs work on a 5?
Frank
Part # 3608800H72 Volume Knob or NSV Mode Switch Knob
Part # 3680384W62 Stored Voice Mode Switch Knob
Bob
- Wed Mar 31, 2010 8:28 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor II Set 8
- Replies: 2
- Views: 1797
Re: Minitor II Set 8
Craig, Jumper 3C3 applied to early Minitor II Decoder Boards, like model NRN5493A. Your decoder board should be labeled NRN6190A If so, Jumper Set 8 (option R177) A-B, C-B is as follows: 3C1 OUT 3C2 OUT 3C4 IN 3C5 OUT 3C8 OUT (requires cutting the circuit) 3C9 IN 3C10 IN 3C11 OUT (requires cutting t...
- Sat Mar 27, 2010 11:01 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Minitor II second frequency alert
- Replies: 3
- Views: 894
Re: Minitor II second frequency alert
JU3A4 out does allow for tone alert in the "2" position. In the standard Minitor II, the positions marked "1" and "2" are both Monitor Mode. The "Bell" position (F1) is the only position that is Silent until tone activated (Alert Mode, Non-Monitor) If your pag...
- Wed Mar 17, 2010 6:12 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor 5 Volume Control
- Replies: 4
- Views: 2213
- Mon Mar 15, 2010 4:02 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V constant squelch problem.....
- Replies: 4
- Views: 2024
Re: Minitor V constant squelch problem.....
What are the frequencies your pager is programmed for?
Bob
Bob
- Tue Feb 23, 2010 8:52 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor freq range
- Replies: 1
- Views: 1477
Re: Minitor freq range
No Minitor model will do that frequency spread.
You will need to use 2 pagers.
Bob, CLARKCOMM
You will need to use 2 pagers.
Bob, CLARKCOMM
- Sat Feb 20, 2010 10:17 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor II questions.
- Replies: 4
- Views: 2203
Re: Minitor II questions.
Zack, A normal 2-channel Minitor II functions as you described. "Bell" position - Selective call F1 "1" position - Monitor F1 "2" position - Monitor F2 A VHF High Band Minitor II RF board on 159 MHz. from the factory should be a NRD7203A and covers 148 to 159.999 MHz. T...
- Sat Feb 13, 2010 6:27 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V Band Split Question...
- Replies: 4
- Views: 3018
Re: Minitor V Band Split Question...
You are in good shape with what you have... The 151 to 158.9975 model is proper for your frequencies. 159.180 is close enough that the 151 to 158.9975 RF board will operate properly. When you program 159.180 for your second channel, the software will give you a "Out of Band frequency warning&qu...
- Sun Jan 24, 2010 4:43 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V Problem
- Replies: 4
- Views: 2227
Re: Minitor V Problem
Have you tried more than one charger? Also will your batteries operate a known good pager? The last Minitor V that came to me with your symptoms was actually a bad charger. The charging LEDs (both pager and battery) would change to green but did not actually charge the battery. I did have a Minitor ...
- Tue Jan 05, 2010 9:33 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Charger LEDs
- Replies: 1
- Views: 1602
Re: Charger LEDs Minitor III / IV
Mouser Electronics, http://www.mouser.com Mouser Part Number 606-CMD67-21VYC Chicago Minature # CMD67-21VYC/TR8 LED, SMD standard, Yellow Water Clear Current price is $ 0.42 each or $ 0.31 each in quantities of 100 Bob, CLARKCOMM Minitor III / IV
- Wed Nov 04, 2009 1:26 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Changing Minitor IV band split
- Replies: 1
- Views: 1410
Re: Changing Minitor IV band split
You will also need to replace the RF Board with a 151-159MHz. RF Board.
Bob
Bob
- Sun Oct 04, 2009 8:05 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor IV Programming Problem
- Replies: 1
- Views: 1582
Re: Minitor IV Programming Problem
Mike, It appears to be a software problem with the Windows version. I got the same results as you did. What you are trying to do works fine with the DOS version of the software. With your version of the Windows software, set the switch position that you want to be Option 14 to Option 8, then program...
- Sun Oct 04, 2009 7:38 am
- Forum: Motorola Digital and Voice Paging
- Topic: minitor IV PPS part number
- Replies: 2
- Views: 1745
Re: minitor IV PPS part number
RVN4239A
MINITOR IV PPS FOR WINDOWS
MINITOR IV PPS FOR WINDOWS
- Fri Aug 28, 2009 9:25 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor IV RX Issues
- Replies: 3
- Views: 2074
Re: Minitor IV RX Issues
Ryan, The Minitor IV squelch setting of 10 is open squelch. "1" is full tight squelch. "8" is the factory default. The Minitor IV is certainly not as sensitive as a Minitor II or Minitor V, but normally work pretty well in areas of good signal strength. What is your paging freque...
- Wed Aug 26, 2009 6:02 am
- Forum: Motorola Digital and Voice Paging
- Topic: Director II SV Pager to Minitor II
- Replies: 18
- Views: 5035
Re: Director II SV Pager to Minitor II
You can get the NRN6702A that you have to provide a traditional squelch for monitoring, but you will need to slice and dice the board a little. You are O.K. with R321 and 3C6 removed. Remove 3D5 On the back side of the board, cut the trace from Stored Voice Module U601 Pin 3 Install a jumper from U...
- Mon Aug 17, 2009 11:23 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor III/IV Band Split changes
- Replies: 2
- Views: 1784
Re: Minitor III/IV Band Split changes
Do you have the appropriate 45-49 MHz RF Board available to install?
The change you desire to make requires a board swap along with the bandsplit change in the software.
The change you desire to make requires a board swap along with the bandsplit change in the software.
- Sat Aug 15, 2009 5:00 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Director II SV Pager to Minitor II
- Replies: 18
- Views: 5035
Re: Director II SV Pager to Minitor II
The reason I suggested opening R503 or removing 3D5 was to facilitate the desire to defeat the auto-reset and to simply hear and record the full message, allowing the user to reset the audio at the desired time. The NRN6702A system-decoder board is a bit of a weird bird. It was never designed for tr...
- Sat Aug 15, 2009 7:52 am
- Forum: Motorola Digital and Voice Paging
- Topic: Director II SV Pager to Minitor II
- Replies: 18
- Views: 5035
Re: Director II SV Pager to Minitor II
Turn pot R503 to maximum counterclockwise position or remove jumper 3D5.
Bob
Bob
- Thu Aug 06, 2009 7:10 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Miniotr V - Reset Button Problem?
- Replies: 4
- Views: 2088
Re: Minitor V - Reset Button Problem?
The Minitor V reset button is made into the center housing section. It is not replaceable. Motorola does not sell housing parts (other than the battery lock and belt clip) for the Minitor V. You can use Minitor IV knobs on the Minitor V. To get a new rubber reset button you have to return the Minito...