Batboard

slavik

Information on the GM365 and HHCH for the GM series is very limited from the googling I've done. It does seem that the GM365 is primarily used on GM339's though. You should explore this site http://www.ats-web.de/index.php?id=319&L=1 You are right, gm 365 = gm360 (gm339) + ATS optional board + ...

slavik

Virtual PC-Win XP Mode doesn't support MS-Netfram soft. In fact trbo cps and new elp cps are not running.

slavik

check radio's ID
in C+ mode max ID 65535

slavik

CPS R05.09 EMEA multi languages

cps.exe
8c854 74 > EB
8c86d 75 > EB
1d1650 74 > EB
1d166b 75 > EB

ELPELMCPSERVICES.DLL
1BEBE 13 > 00
1BED0 75 > EB

for toshi x
this trick work only with MDC radio.
with Select V european radios this trick doesn't work

slavik

toshi x wrote:Is a good job
I have one contribution:

CPS.EXE
x8C604 74 a EB
x8C61D 74 a EB

ELPELMCPSERVICES.DLL
x1BEBE 13 a 00
x1BED0 75 a EB

with this we have full range frequencies

greetings to all

x8C604 74 a EB / x8C61D 74 a EB
Is it for CPS R05.09 or for CPS R05.12?

slavik

Did anybody test new mototrbo cps r4.6?
All ok? may be cps r4.6 with bug(s)?

slavik

check tanapa number of GP680.
probably you programmed codeplug for radio with tanapa letter C (exam. pmue1437C) into radio with tanapa A or B (pmue 1437A or 1437B).
A / B / C have different IF, shift 250 kHz.

slavik

GM160 = CDM1550
GM160 is only conventional radio and can't work in LTR systems

...."flashing display"???...
If radio has flashing display+flashing LED+loud sound it means VCO radio is fault.
In this case the best way to send radio in Motorola service (depot) center.

slavik

Please help me,

I can't find correct part mumber RF PA transistor for portable Waris 800MHz.
Detailed service manual shows 5105079H01/5105385Y73 but Motorola Online doesn't contain info about these parts.
Anybody can help me and specify correct part number?

Regards!

slavik

I have got multi languages cps.

I did check up cps R0508 again and there is one correction

region check off
offset 1F578B (h)
offset 22FF95 (h)

pass check off
offset 11B011 (h)

Also I tested cps on sample files with other regions ID, all Ok.

slavik

CPS R05.08 EMEA

region check off
offset 1F5789 (h) 7505 change to 9090
offset 22FF95 (h) 7505 change to 9090

pass check off
offset 11B011 (h) 7505 change to 9090

slavik

GP340 (GP360/380) support only SelectV signalling,

slavik

Thanks a lot!

slavik

Hi! When I try to read (or open sample files) Mototrbo mobile/portable radios (only models with 160 channels) there is an error message #1713. CPS - 4.0 build 112. Codeplug - R01.04. OS on PC - Win XP SP2. Help file CPS hasn't got info about error 1713. Somebody can help to solve this problem? Thank...

slavik

Hi!

Need help with a repeater dr3000. Problem is failure in upgrade process up R4.0.
Error message: "Unable to detect device. Please reset device,....."
Repeater constantly in seft-test mode (blinking RED).
Power Off/On doesn't reset repater.

How to reset a repeater in this case?

Thank!

slavik

It's hardware problem,
recommend the first step - install new RAM IC.
If there will be no positive result, then install new Eeprom IC and FlashROM IC.

slavik

look

http://batboard.batlabs.com/viewtopic.p ... ck#p325968

slavik

Yes, "LA" and "AA" ("FD" ???) versions not support
radios with SelV signalling: CM340/CM360/CP340/CP360/CP380.

slavik

Ok, write in PM.

slavik

I'm sorry,

correct offset

5F2CEB - 400000 = 1f2ceb
62D255 - 400000 = 22d255

)400000 -offset Imagebase)

slavik

in cps.exe

slavik

I can show that it is necessary to change in codeplug (.mot) to expand bandsplit
and I can show on an example of VHF mobile radio (GM140/160 - CDM750/1250)
In my region radio 220MHz is not sale, but the technology of change codeplug will be identical.

slavik

Yes, s-rec really format used for read/write data in regural CPS and Moto labtool. However "non regural labtool" can contain internal converter from s-rec to mot and back. Besides, FLO protocol contains some commands/procedures which can be passed at read/write eeprom. It allows to make wo...

slavik

You have soft-tool for direct read/write data from eeprom IC to file.mot and back?

If such tool at you is, I can help how to expand bandsplit ht/cdm radio.

slavik

commercial series CPS R05.07
general EMEA region
offset 5F2CEB (h) 7505 change to 9090
offset 62D255 (h) 7505 change to 9090
now cps support all region radios: cm200/300, pr400/pm400, cp150/200, ep450/em200/em400,
cp040/cp140/cp160/cp180, cm140/cm160 and AZ region radios.

slavik

I search schematic power supply ACPS112WA for Cluster Management Module Canopy (origanal PSU112-300 from Phihong Tech.).
Somebody help me?

Thank!

slavik

http://www.selex-comms.com/en/wp-conten ... _EN_LR.pdf

it would be desirable that functionality of a mototrbo repeater was same

slavik

Thank you!

slavik

Motorola announced in 2009 release firmware with multisite support.

Somebody has more detailed information?

Most interests:
- the maximum quantity of sites
- presence simulcast mode

slavik

1.
from Relise Note for firmware R03.10.03
"...
CODEPLUG COMPATIBILITY : R03.10.02
CPS COMPATIBILITY: R03.08.03 and later
..."
You must use CPS R03.08.03

2. What tanapa was at radio GP680, non Rohs or Rohs?
Codeplug for Rohs and nonRohs tanapa can have differences.

slavik

CPS R03.02.01 for firmware R03.10.03 is old.
you must used CPS R03.08.03

slavik

result of experiment: radio normally work only from 142.
but it is required o lot of time
It is uninteresting

slavik

Yes, the voice in digital mode does not contain noise, all speech sounds cleanly ... but in 60-70 % of cases we cannot define (understand) who speak (the timbre of speech is strongly changed). Dealers in Russia, who tests a demo Mototrbo, this bad effect have confirmed all. The reason of this effect...

slavik

Question to all:

As you estimate{appreciate} quality of transfer voice through mototrbo,
especially recognition of the one who speaks (more especially for female voice?

slavik

The XPR8300 has telephone port? Somebody tested it?

slavik

I wanted any info about Motorola DMR ETSI radio GTP800 and GTM800: data sheet, functional, acc.

Thanks!

slavik

XTL1500 with G809 option ("3600 analog trunking") will work in system Smartnet?
Or works only in system SmartZone (analog mode)?

slavik

GM160 VHF or UHF? 25 Watt or 45 Watt?

slavik

Thank you!

BR!

slavik

Hi!

I'm looking detailed service manual on HT1250LS+ and CDM1550 LS+, band 220 MHz and 700 MHz.

Anybody can help me?

BR!
Slavik

slavik

Type of a file codeplug *.cpg or *.mot?

BR!

slavik

Looking service manual (or basic service manual) on GTX mobile, me interests model chart.

BR!

slavik

In this forum there is one interesting Author. On his homepage the information is specified how to program codeplug in Waris Radio independently of the CPS. I checked this method repeatedly and it really works. Knowing this information, it is possible to pass a way back (that is from the binary data...

slavik

(I’m sorry for my bad English) "Wavetar wrote: ... I heard when viewing codeplug information in HT1000 LAB, the 403-470MHz model showed a "base" frequency of 375MHz...I wonder if this is the same "base" frequency for the 403-470MHz Waris portable? Referring to an earlier pos...

slavik

I need data sheet on two IC:
- (SA)5750U54 VCO buffer (Philips)
- AT25016-1(63A27) FracN (Atmel)

This IC used in Professional Radio Motorola CDM/HT/GM/GP.
On web sites of manufacturers and Inet there is no information on specified IC.

Thanks in advance.

Slavik

slavik

On example CPS R06.03.02 for ProfRadio Waris MDC. HexWorkshop is required or any hex editor. Open for editing file ProRadio.exe from folder with install CPS R06.03.02 Go to the offset 00240EEA from the beginning of a file. There you will see value 741C. Replace on EB1C. Save a file. )) for CPS R06.0...

slavik

There is enough for programming 3 pin cable.
The cable 6 pin is required for flashing.

BR!

slavik

If it is not required to you IS radio, and enough simple radio, can try simply install logic board from other radio. If the band of frequencies of both radio identical most likely anything to reprogram is not necessary. If the band different, it is necessary to program correct code plug. The circuit...

slavik

To use logic board from other radio it is possible. It is necessary to program correct Code Plug, and flash the firmware for GP1200. Really it is better to use Unirib and flashcable. I really recommend you to visit homepage Andreas. There a lot of the interesting information. Also see http://www.bat...

slavik

GP1200 DOS RSS allows to create new code plug. In my archive is DOS RSS verstion 03.03.00.
"refusal of IC flash memory" means destruction internal structure of cells IC memory. In that case it is necessary to repair (change) IC flash memory.

BR!

Search found 57 matches