Batboard

AHSGA

I need to adapt a headset that has a xts connector on it to a apx 7000. Is there an adapter?

Thank you

AHSGA

If you are talking about the zetron mics I have a manual for programming them but loaned it out. I can get it back next week.

AHSGA

I never found the smoke. I have a box full of parts though. Rube was doing his thing when he designed it.

Regards

AHSGA

Thanks for the replies.

Regards,

AHSGA

What is the difference between the nmn6193B mic and the 6191C mic? I guess the question should be, what mics can be used on the xts5000/efj radios?
I have the 6193 mic and wanted a spair mic for use on my efj.

Thanks

AHSGA

Hello,

A battery with impres on it came with a radio I just purchased. The battery is a nntn4437b. The charger is a kit no. ntn7209a model aa16740. Is this charger a impres charger?

If not, can you point me to a place to purchase a impres charger and spare battery?

Regards,

AHSGA

I just spent $100 for channel elements from IC. (Receive and Transmit)

AHSGA

Hello, Does any one have info on the Micor repeater card "Morse id". Looks like it has a programable chip on it. The chip is labled CHD823. The board is a TLN641CDX. The card has a test button, two led's, and a level access hole. I would like setup info and need to have a chip programmed w...

AHSGA

I purchase several boards for a Micor uhf repeater. One of them is a simo control board ,trn5379b. Any more info on this board besides what I found in a search: "PURC card Decodes function tones and keys the transmitter in response to correct code sequences." Any docs on this board? I noti...

AHSGA

http://batboard.batlabs.com/viewtopic.p ... highlight=

AHSGA

Sucess!

I moved the spare 99 channel controler to the 99 channel uhf ht600e with the weird mic connector, installed the dtmf keypad, programmed in a 99 channel uhf codeplug and it worked. I still don't know what's up with the different style of mic connector.

Thanks

AHSGA

Hello,

I was going to put a mt1000 dtmf pad on a UHF HT600e and found that the connector is different. I have an extra controler from a 99 channel vhf. Is the controler on a 99 channel vhf or uhf? Can I take a controler from a vhf 99 channel and and put it in a uhf 99 channel HT600e?

Thanks

AHSGA

1 N/C 2 Ground 3 Ground 4 DATA 5 PA Squelch 6 N/C 7 External Spkr 8 External Spkr ground 9 Pac RT out switched 10 N/C 11 A+ 12 N/C 13 N/C 14 Mic 15 PTT 16 16.5v 17 Busy 18 N/C 19 N/C 20 PA Audio common 21 PA Audio 22 N/C 23 Ign Switch 24 A+ 25 N/C This is from batlabs

AHSGA

If you are looking to use the speaker for another application this is what I was told.

red, orange, green to +12 volts

brown, black to ground

blue +, white - audio outputs

I haven't tried this yet.

Hope this helps

AHSGA

I purchased a bunch of the connectors and pins to the mt1000 mva power cable. I would be willing to mail you one if you want. You should, however, avoid the pin out on bat labs for the connector. It leads to letting the smoke out.

Regards

AHSGA

This is where I have bought pelican cases.

http://www.cases4less.com/

Regards

AHSGA

I'm still looking for a manual. All help would be appreciated.

REgards

AHSGA

Thank you.

Regards

AHSGA

That was very easy, now knowing how.

Thank you very much. I would love to see more of this manual. Any chance?

My next question is, where do I put the smoke back in?

Regards,

AHSGA

Perhaps my nomenclature is incorrect. Not sure that I would describe this as a brain. This convertacom has no visible screws on top, bottom, or sides. NTN5613A. convertacom for MT1000. Has the four soft buttons on the front along with a display. One side has PAC/RT on off switch along with the mic j...

AHSGA

I let the smoke out of my convertacom :( after purchasing some power connectors that have an opposite pin out than the pinout on the batlab site( and applying an unfused 12 volts). I can't figure out how to disassemble the darn thing to make a repair attempt. Does the metal piece on the back come of...

AHSGA

I've ordered two from ebay, and neither were suitable. The shipping was a killer. The one that I'm using was as a result of a posting on our local ham radio reflector email list. It was free.

Regards

AHSGA

I seem to have misplaced (lost), my power connector for my convertacom. Does any one have a spare power cord sitting in their junk box that I could have? It doesn't seem to be a standard anything.

Regards,

AHSGA

Ok, I found there is an output on the Tinytrak to ground for ptt

AHSGA

Hello, I am wiring a TinyTrak to a MT1000 and I finally gotten to some specific questions. I have used a earphone adapter and added pins. For the antenna, I have tied 12 and 13 together and then to coax shield. Pin 10 then goes to the center conductor. I think that this is correct. For the speaker, ...

AHSGA

I have purchased disposable battery packs for MT1000s from this vendor. No problems and they respond to email.

Regards

AHSGA

Hello,

Has anyone hooked up a MT1000 to a APRS? I was thinking of a Tinytrak and a Garmin GPS 18. I would gut a MT, making the smallest, lightest package I could. Any special considerations with the output/input to a MT1000?

Regards

AHSGA

Thanks Glenn,

I got it in the mail today. It's just the right size.

Regards

AHSGA

OK, 174. I looked it up in Mouser and see it's around .110 inchs. That is a little bigger than the stuff in the antenna adapters, but most likely would be small and flexable enough.

Does anyone have a foot or so of this stuff that I can beg borrow or steal?

Regards

AHSGA

Helo,

I've taken apart a MT1000 antenna adapter to see how it is made and I am using some earphone adapters to make more. I need to get a foot or so of the coax that is used. Anyone know the spec/part number on this coax? It is around the thickness of a pencil lead.

Regards

AHSGA

Look under Convertacom on ebay. I bought a bunch of NIB MT1000 MVA speakers on Ebay. 12 watts I believe. Seems like I paid $15-20 shipped.

Regards

AHSGA

I'm not sure which it is. Looking at the model number and comparing it to the chart it looks like it can do pl and dpl. I wasn't aware of the dpl. Most likely this is the problem.

Regards

AHSGA

Hello,

I have a couple of P110 radios that I would like to know the tone on. I tried to use the tone scan mode on a icom w32a and was unable to get it. Is there a default tone that folks might have programmed these radios for? Are the PL tones different on the P110?

Regards

AHSGA

It's a standard part out of their drawers:

8 AA Battery Holder
Model: 270-407
"This battery holder holds 8 AA batteries and has a snap connector design for easy installation".

It slides in sideways with about zero clearance. Gutting the old battery case is a PITA.

Regards

AHSGA

Thanks for the reply. I'll wire the pack directly as suggested.

Regards

AHSGA

Hello, I am building a alkaline battery pack out of a gutted rechargable. Inside I found several components besides the leaking nicads. One diode, one resister, one small black thing and one cased item, labeled "pepi n-1". Should I include any of these items in my battery pack and what the...

AHSGA

Thanks,

I'll see if I can find one of these connectors. Perhaps from Mouser electronics.

Regards

AHSGA

Thanks for the info.

I've only real film, not digital camera so will be unable to send you a photo. The red button does indeed short the 4 to 5 pin when pressed. Seems like a bad spot to put a ptt.

Regards

AHSGA

Hello, I am new to the MT1000 radio collectors group, (MT1KCG), and of course have been buying every odd ball attachment I can find off of Ebay. I have a couple of audio adapters: NTN5560B, and NTN4812A The first one, has pins 1,2,4,5,7. There is a red button on the side and the connector is round w...

AHSGA

Thank you for the information. I think that I will order in one of the prebuilt alkaline packs and give it a try. How many alkaline cells if I gutted an expired nicade pack and tried making my own? If I went with 8, that works out to 12 volts, just over the value that I measure on fully charged nica...

AHSGA

Hello, First time poster questions: I am with a local Sheriffs aux that has received a bunch of MT1000 radios taken out of service. The purpose of our club is to provide backup communications for the county in case of emergency. I'm looking for Battery cases for MT1000 radios that take alkaline batt...

Search found 41 matches

XTS to APX audio adapter?

Re: Zetron Model 25 Manual

Re: MTVA disassembly

Re: Speaker mic for xts5000/efj

Speaker mic for xts5000/efj

impres battery and charger

Micor repeater card "Morse ID" info needed

simo control on micor repeater

MT1000 Controler question

MTVA disassembly

convertacom for mt1000

MT1000 wiring help needed

MT1000 APRS?

Need small coax spec

Are the PL tones different on a P110?

Building a MT1000 battery pack - have questions

Audio/headphone adapters for mt1000

MT1000 alkaline disposable battery packs