Batboard

wireless.friendly

Search for the first 01E1 string in the upgradetool.exe. When you found this,go back from this point to the first 0F84 string and edit it to OF85.After this is done you have the half labtool. Run the program and set the regionalcode. Andreas Thanks! No matter for which region designed UpgradeTool.e...

wireless.friendly

Get a GM/GP3xx or GM/GP6xx upgradetool,edit it (text is on my homepage) and change the radio regionalbyte. Andreas All texts in German. Can you give direct link or copy/pase info here? And what you offer me? Change region code in PRO7550/7650 radio to AA and try to porogramme it with MTX8250 softwa...

wireless.friendly

Any way to make region hack on MTX8250 CPS to get LA region?

I have the similar problems as topic author and don't see any other ways...

wireless.friendly

The Commercial Series radios from Motorola will allow you to enter any DPL code you wish...not that it matters though. As far as i can tell, any possible "non-standard" DPL is the same as one of the the "standard" DPLs. Here's a good reference for DPL info: http://www.open.org/b...

wireless.friendly

IN regards to this I have mtr2000 programmed w/a DPL of 525 and the P1225'2 MT2000 M1225'S WON'T Handle this DPL any ideas?? Stu This code exist in US Waris (Professional Series) radios! I know some Icom and Kenwood radios will allow you to program any DCS code from 000 through 777. Which Kenwood m...

wireless.friendly

It's also possible that you were in the test frequency list, and it uses a variety of signalling schemes to properly align CSQ, TPL, DPL, OSW/ISW and so on. You may notice the TX channel will never coincide with the RX channel due to the offset, but keying the mic rapidly may jump to the next test ...

wireless.friendly

Hi all! I am very need in MaxTrac 800 MHz codeplugs to bring back to the life few of my personal MaxTracs. Any codeplug from this list will be very helpful for me: D35MJA73A6_K the same as D35MJA73A6AK D35MQA5GB4_K the same as D35MQA5GB4AK D35MWA5GB6_K the same as D35MWA5GB6AK D45MJA73A6_K the same ...

wireless.friendly

Hi guys! What mean Max High Sig in Product Line (in board replacement procedure)? Max - this is MaxTrac =) Sig - mean Signaling (which exact? MDC1200?) High - what it mean? I think that this is NOT high power radio, because each second Max High Sig model number begins from D35 (15W), not from D45 (3...

wireless.friendly

[quote="wireless.friendly"]Hi guys! What mean Max High Sig in Product Line (in board replacement procedure)? Max - this is MaxTrac =) Sig - mean Signaling (which exact? MDC1200?) High - what it mean? High power? No! Because each second Max High Sig radio has D35 model number (15W power out...

wireless.friendly

Hi guys!

What mean Max High Sig in Product Line (in board replacement procedure)?

Max - this is MaxTrac =)
Sig - mean Signaling (which exact? MDC1200?)
High - what it mean? High power? No! Because each second Max High Sig radio has D35 model number (15W power output).

Any ideas?[/b]

wireless.friendly

If you choose "Yes",you will tune the radio with the tuning data from the radio. If talk simpler, radio will be programmed without changing of tuning data? If you choose "no",you will tune the radio with the tuning data from the loaded codeplug. Saber's codeplug contains inside ...

wireless.friendly

Do not trust to my eyes - really nobody know? Saber RSS don't asks Do you want to extract tuning data out of radio? Y/N before programming?

wireless.friendly

Hi all! What mean question Do you want to extract tuning data out of radio? Y/N when I try programm codeplug to radio? Radio is MX2000. I try both variants - YES and NO. Doesn't see any differencies! May be I lost (erase) factory turning data of my radio? Please explain it and also please explain wh...

wireless.friendly

Max-trac

Are you sure that tuning data not loaded when I in the aligment (F2) menu?

wireless.friendly

Max-trac What does it sound like when you key it up with just the microphone? (not RSS) Sounds normally! No chirps! And a D35 is identical to a D45 except for the 45 has the higher power PA unit on the back. Identical, but may be differencies matter in this case. It is most likely that when in the ...

wireless.friendly

MotoMax300

All the one's Ive aligned/programmed never done that....that I am aware of .... I dont recall it anyways. been a while

You has D45 MaxTrac(s)? D35 MaxTrac not sounds like on this record.

Does it do it when you key the radio yourself out of programming?

Please explain what you mean.

wireless.friendly

Just my GM300 mics doesn't works. Maxtrac mics also doesn't works. I make small research and find out that no proper Positive voltage on the mic's pin # 5. Must be near +9V, but really 0.23V. I am not sure that it is due the re-programmings. May be anybody face with similar problem? May be anywhere...

wireless.friendly

OK, I made it work!!! I took a 2ch radio with the same logic board and eprom that you have and; 1. Blank with conventional lab RSS, F8 extended, don't save tuning. 2. exit and run lab-trunking RSS 3. load the saved file that I posted earlier 4. go into replace logic board 5. change to your serial n...

wireless.friendly

2 Max-trac and ALL:

Maxtrac must works with GM300 and/or Waris microphones? Must be fully compatible?

wireless.friendly

any trunking maxtrac that also supports conventional also had the advanced head and different firmware than what you have. You are not right. I check "MaxTrac 800 operating manual" and find out that MaxTrac 820 has only basic head (no advanced head as calss for 820 family). Advanced head ...

wireless.friendly

Max-trac I have seen a 2ch trunking maxtrac with one trunking ch, and one conventional, but it had the expanded 5-pin board. If to trust MaxTrac RSS, such radio exist - model number is D45MQA5GB4_K: MaxTrac 820 Modes 1 Watts 35 Features TPL and DPL Features Talk Around Features Trunking So it won't...

wireless.friendly

RESCUE161
MTS2000des
Max-trac

Thanks 2 all, but... anybody know, I can made trunking radio with one conventonal mode w/o changing firmware chip?

wireless.friendly

MTS2000des You agree with Max-trac that I can made trunking radio with one conventonal mode w/o changing firmware chip? Since you only have a 2ch head, you need to initialize with panel 000 and find a model that has ONE trunking and ONE conventional. Which RSS I must use to re-initialize logic boar...

wireless.friendly

Since you only have a 2ch head Head with 2 sys/2 fleets cannot serve radio with more than 2 channels? And if you don't have lab trunking RSS, I believe you will need a codeplug to put in it. Are you sure that exist special Trunking RSS version? And why I need Trunking RSS? After all I can blank LB ...

wireless.friendly

Max-trac

As you can see:

Sticker on board: HLN9313B, 86534, 0, 17/95
Sticker on chip: HLN9435D, V54.06, (D200) 17.95

wireless.friendly

This is "under cover" part of my logic board:

wireless.friendly

On the logic board, under the cover, there is a plug in chip. It is an Eprom, not EEprom. IE under the sticker there is a window that you shine UV light into to erase it, then you have to have an eprom burner to program it. THE RADIO DOES NOT PROGRAM THIS CHIP. Ok. What does the sticker say? Will c...

wireless.friendly

May be I can try initialize board from Trunked RSS but with other's codeplug with enabled conventional mode(s)?

If anybody have trunked codeplug(s) from D45 Maxtrac with one ore more enabled conventional mode, please send it to me wireless.friendly # gmail.com.

wireless.friendly

Guys! I also try initialize this as trunking (by using Conventional RSS). For initialization I used all right genuine data (data identical with factory trunked radio): PRODUCT LINE Max Trk Option MODEL NAME MaxTrac 820 MODEL NUMBER D45MQA5GB5_K PANEL NUMBER 050 RANGE 806-870 Max Trunk Modes 02 Max S...

wireless.friendly

wireless.friendly

Max-trac wrote:You have to change the firmware EPROM chip to make it conventional...
Do a search here, there has been lots of discussion on it.

You mean change firmware in EEPROM or change EEPROM chip?

wireless.friendly

I bring it to life!!! I blank it and reinitialize with Trunking RSS (not LAB). When I try done it, RSS force me to load codeplug - I load it and radio has been successfully reinitialized! It works now, but I loose some tune data :( All correct parameters of my radio are clear to understand, except ...

wireless.friendly

Hi all! I kill my Maxtrac :( It has been D45MQA5GB5AK (Type I / 2 System / 2 Subfleet) with HLF9122A board (Maxtrac 820???). I blank his logic board with LAB RSS 05.30.00 with saving turning data. After it I reinitialize it in the same LAB RSS as Maxtrac 50: PRODUCT LINE MaxTrac MODEL NAME MaxTrac 5...

wireless.friendly

I am also interesting!

Can anybody share experience with this menu?

wireless.friendly

As promised. There are 2 PDFs for the Maxtrac board initialization procedures. After typing all the scans I received I had noticed that a lot of the information was repeated several times over. So, with a little text formating and printing to PDF I present the following to you guys. I have also e-m...

wireless.friendly

Your LAB RSS is older than your regular RSS, and it doesn't have the higher powered 800MHz model number in it's .mdf (Model Definition File) database. Therefore, it won't recognize it. Not much you can do about it, short of finding a newer version. Todd Todd! U r not right! All my RSS and LAB RSS h...

wireless.friendly

Hi all! I have a questions about this article: http://www.batlabs.com/rptrcabl.html You might want to cut the jumper for the local spkrs - PIN 15/PIN 16 1. This operation to make silent my repeater? If I want "speaking" repeater, I can leave local speker jumper as is? If you want to use DP...

wireless.friendly

No way to get MDC on LS+ (5AN)?

wireless.friendly

just curious to how you are shure that the radio is a us radio. i was under the impression that all of the us versions did dpl? I sure that I own US radios. - CDM series is US by default. - MTS2000 have signs on the original case (MADE IN USA BY MOTOROLA; For customer service call 1-800-523-4007. R...

wireless.friendly

Andreas wrote:You can use the lab flashtool and program a codeplug with higher bandsplit into the radio.

Andreas

As I know, flashtool upgrades firmware in flash. In which here codeplug?

And what with info above - that codeplug encrypted? I cannot patch codeplug if it is encrypted.

wireless.friendly

Andreas wrote:What frequency/bandsplit,do you want to program?

Andreas

For e.g. repeater on this pair: 470/475.

wireless.friendly

MattSR wrote:You cant disable it.

In fact, the latest version of ASTRO CPS will not save codeplugs when installed on a French copy of Windows because the encryption used is not allowed to be exported to France!

And how works users? Keep only one (last) codeplug inside radio? =)

wireless.friendly

RADIOMAN2002

Encrypted codeplug? Very interesting.

Motorola not looking for easy ways

wireless.friendly

Hi all! Recently I find out something very "good" - that US versions of some radios doesn't have DPL codes non-included in old EIA/TIA-603 standard (standard describes only 83 codes). My US Waris have 87 DPL codes (83 standard + 4 "non-standard": 036, 122, 525, 645). My MTS2000 h...

wireless.friendly

Anybody who own D45 (aka hi-power) Maxtrac can help me?

Please connect your radio to PC, run RSS or LAB RSS, open ALIGMENT MENU > TX POWER, toggle PTT (F6) and listen 825.1625 (for e.g with scanner or other conventional radio) for chirp sounds.

Hit me back please!

wireless.friendly

wavetar Correct, Type I radios are ALL Privacy Plus. You would have to get a "C" series Maxtrac to get Type II/SmartNet. Thanks! But where must be "C" letter? For e.g. C45xxxxxxx or C35xxxxxxx? I have no idea about LAB versions, or where you'd get them. It is pitty. And very str...

wireless.friendly

MotoMax300

Why you sure? No other variants for TT I Maxtracs?

wireless.friendly

And other question. How I can determine exact trunk protocol of D45MQA5GB5? My other Maxtrac (D35MQA5GB5) have sticker which shows that this is "Type I / Privacy Plus" radio. But sticker on the D45MQA5GB5 shows only "Type I" and nothing more. But which trunk protocol? Privacy Plu...

wireless.friendly

wavetar

Thanks!

But newer od LAB RSS version is exist? Which p/n and verstion (RXX.XX.XX) it has?

wireless.friendly

And other question: When I toglee PTT (by pressing F6) in ALIGMENT MENU > TX POWER, D45MQA5GB5 Maxtrac sounds on 825.1625 MHz (default RSS test frequency) with some chirp at begin of transmittion and at the end of transmittion. Download and listen MP3 file with recorded chirps D35MQA5GB5 Maxtrac sou...

Search found 140 matches

Re: dpls

Looking for MaxTrac 800 MHz codeplugs. Please help!

Q: Do you want to extract tuning data out of radio (MX2000)?

Help!!! I kill my trunking MaxTrac!

GM300 Non-R.I.C.K. Interfacing question

Qty of DPL codes in US versions of Waris and MTS2000 radios

Trunked Maxtrac (Type I)! Listen and say your opinion!