Batboard

NCSHP311

Hello all, I have a simple question about an XTL5000 I have that has a W4 remote head on it. I've found this cable at Wiscomm and was wondering if this is what I need to program the XTL, any chance Moto makes a USB version? Any help you can provide is very much appreciated, thanks!

http ...

NCSHP311

No problem

NCSHP311

Read post 3 in the thread that Doug linked for you.

NCSHP311

While I agree with you I still have to say it is whoever's car, they can do what they wish not what I would like for them to do. By the same token I do not want to hear them whine and complain about it. If they are satisfied with a half @$$ install then so be it. If it is half @$$ and they want to ...

NCSHP311

He just said in a previous post that someone had asked him. I am assuming it was a buyer, if he tells them " why yes it is"...... I'm sure you see the bigger picture in a now sue happy world. It was just a bit of advise, I'm not jumping him over it......

NCSHP311

If that is the same one you have for sale I would suggest you inform the buyer of what Terry has stated. You certainly don't want that comming back to bite you in the butt later if something were to happen.

NCSHP311

Your date code is the first 3 digits, the first would be the year which appears to be 2004. How often has that battery been rapid charged?? I'd say the battery is on its way out.

NCSHP311

Well first question, how old is the battery?

NCSHP311

NSPD wrote:You can do it from the menu in the radio. "Call Set Tone" I think is the menu item under Audio/Tones and it will let you listen to each one and make a selection.

Thats it! Thanks Jake!

NCSHP311

Is there a site where I can listen to all the different tones available for the HT1250 to function as a pager. I really dont want to have to change it in CPS and ask for a test then repeat the process.

NCSHP311

10-4 I have an 05 F-150 just wanted to see the set up. I am about to do mine.... I have just been lazy since I bought it!

NCSHP311

Where are the pics?

NCSHP311

RPDM313 wrote:haven't got the radios yet and already getting the firmware upgraded? Damn that was fast! Always worked good for me...even with "OLD" firmware. by the way that is a total joke for a price!

Well I do like to pre plan.

NCSHP311

So I figured I'd give my local MSS a crack at my radios......not after this email! Mind you all I want is a firmware upgrade on two HT1250's.

Good morning.
The flat rate factory repair for the HT1250 portable radio is $299.00 per unit.
This should provide the firmware upgrades that you are ...

NCSHP311

http://www.radioreference.com/apps/db/?sid=284
It's UHF trunking.

NCSHP311

RPDM313 wrote:Two mini phantoms (Gen 3) in the rear window!

Just so you know the mini phantoms are not Gen 3. They are Gen 1!

NCSHP311

Also the keypad is the brain of a smart siren.

NCSHP311

model number D44KMA7JA5BK

NCSHP311

Nexrad16 wrote:FPP with or without a dongle?

Hopefully it would be front panel play with the dongle included!

NCSHP311

Our 800 system is also patched at the console to 280. Do you guys use 155.340 for hospital call ins? NC law mandates that every ambulance in NC regardless of 800 system or not also have a VHF radio! I would check the FCC database for anything close to you with the freq.

NCSHP311

154.280 is NC state fire and 155.280 is NC state rescue as well.

NCSHP311

Grog wrote:
NCSHP311 wrote:Wanna get rid of it? I'll buy!!
You like buying broken radios?

I'm quite sure it can be fixed!

NCSHP311

Wanna get rid of it? I'll buy!!

NCSHP311

tessco?

NCSHP311

pop a hole in the roof!

NCSHP311

Read the manual

NCSHP311

Peter I sent some cash via paypal several weeks ago, it was returned to me lastnight, it was unaccepted!!!

NCSHP311

I have been trying to break down the code I have out of a minitor 4 pager....our tone code is 1129 what are the individual tones? Thanks!

NCSHP311

Our max power is 110 watts.....I believe the antenna can be 150'...if that helps ya?

NCSHP311

A local private ambulance company I work part time at has a 50 watt repeater, connecter to a diapole antenna which the tip is at about 85 feet off the ground. The owner is looking for a way to get more out put, we are looking at the possiblilty of adding an amp? would this be a feasable soulution ...

NCSHP311

rrfd43 wrote:The only thing that would impress you more is when you look in the back of the truck....

And what would be there?

NCSHP311

Most likely because that radio wasnt meant for the application you are trying to use it!

NCSHP311

HLA wrote:what's next, rhino lining to make it bulletproof?

Hmmm Line X is across the street......sounds like next weeks project!!

NCSHP311

I have a systems saber model 3 in VHF, when I power it on everything works fine until I key the PTT button. When I push it the radio goes into monitor mode, it does this every time I go to key up.....any ideas as to what is wrong and what it would cost to fix????

NCSHP311

How exactly do you decode these?

NCSHP311

I bought one off ebay very similar.....good for short distance TX, battery life is about 6 hours maybe 8 if you have a real good charge!

NCSHP311

by the same token can you put a Systems Saber 3 in an Astro 3 housing?

NCSHP311

No one?

NCSHP311

GMC wrote:I like the "saying" on the back .......

nice overall

agreed!

NCSHP311

I have a question regarding HT-1000 cloning. I understand that the two radios in question have to be of the same model number or it will not work. My question is, is it as simple has hooking up the two radios via the cable and turning them on? Could someone please shed a little more light on this ...

NCSHP311

BTW anyone have any gromet tubes they wanna sell I need 8 and 8 cables....

NCSHP311

Oh I like, be expecting a pm from me for some info, I smell a update to my Dakotas interior!!!

NCSHP311

Is there a CPS version of the system saber software avaliable for this radio, or just the old RSS? Thanks!

NCSHP311

There has to be at least 20 % body damage for it to affect the price of a leased Vehicle.......DRILL away!

NCSHP311

yes but in reality it doesent take that long for one and two I dont have 15-20 bucks to blow on new tubes everytime I decide to change vehicles.

NCSHP311

I have a Larsen mounted on the side fo my tool box which works great. You should consider an L bracket on the side of the tool box!

NCSHP311

Why bother saving the lamps?
The hourly rate to remove them and patch the holes must be way more than replacement of the lamps.
We just leave them in and remove the controller.
Much better use of our time
I understand if you are doing this as a business, I do all my own work, plus some installs ...

NCSHP311

I have always used tire patches over the holes with a thin bit of RTV over the edges.

NCSHP311

I agree Rob. I firmily believe it was an attempt to steal Galls' business from SVP as they made a light identical to the full length version of the Phantom. Whelen is usually the first to cry foul if someone remotely copies their idea, looks like the tables might turn!

NCSHP311

SPEC8A SPECTIR8 LED DASH LIGHT AMBER $119.00
SPEC8B SPECTIR8 LED DASH LIGHT BLUE $119.00
SPEC8C SPECTIR8 LED DASH LIGHT WHITE $149.00
SPEC8D SPECTIR8 LED DASH LT RED/WHITE $129.00
SPEC8G SPECTIR8 LED DASH LIGHT GREEN $149.00
SPEC8J SPECTIR8 LED DASH LT RED/BLUE $129.00
SPEC8R SPECTIR8 LED DASH LIGHT ...

Search found 66 matches

XTL5000 Hardware Question

Re: System Saber III and DVP

Re: System Saber III and DVP

Re: What is it with people?

Re: instrinctly safe ht750?

Re: instrinctly safe ht750?

Re: HOT battery question

Re: HOT battery question

Re: HT1250 paging question

HT1250 paging question

Re: 2002 F150 Install Done

Re: 2002 F150 Install Done

Re: Firmware upgrade

Firmware upgrade

Re: Systems Saber on a "newer" TRS

Re: Got it done F150 Install pics to follow!!

Re: Help: SS2000 smartsiren - died!

Spectra bandsplit?

Re: radio sales...........

Pager codes

repeater?

Systems Saber question

Battery date codes

Motorola Cloning

Systems Saber 3???