Hi there I am playing with multikey capabilities in a 800Mhz trunking radio. It seems that I can only strap specific channels/talkgroups to a single key. I was hoping to have mutikey capabilities similar to the conventional side where you can receive on multiple keys and then select the key you wish ...

I'm looking for some wire pinouts to connect a DIU3000 to a PDR3500 portable repeater.

will I use the QUAD connector (C823AA) or the consol connector on the back panel.

Thanks,

Ryan

I found the problem. I had connected a 26-pin data cable (HKN6160A) to the radio (05 head) will live & it went into emergancy, I cleared the emergancy but for some reason every power up it would still emergancy. during further troubleshooting I found that if power was completely removed from the ...

Thanks Jim that was what I was looking for, I should have seen that :lol:

I seem to be having troubles with the Keypadmic side button programming. They dont seem to work. I am trying to get MSG on the top button (no dot) and it comes out on the bottom (two dots). When I reversed it I got just ...

I'm working on a XTL5000 that emergancy at power up. I checked the Radio wide-->Emergancy check box and it is unselected. What else could it be?

Thanks

This is some shots of what I see in the software and what I see on the head. I also wonder where the soft menu items came from when I converted the heads?

I am in the process of converting my W7 head to an 05 control head. I have it up and running and it has assigned itself some of the functionality from the W7 but not all that I need. When I look under Radio Config-->Controls-->05 Control Head, it shows me the where I can assign the buttons, but I ...

Does anyone know where I can find 3.5mm Threaded plugs to fit in the XTS3000 side adaptor. I have looked all over & cant find them, I must be using the wrong keywords. Specifically I am looking for plain plugs in either mono or stereo so I can solder on my own cables

Thansk,
Ryan

Does anyone know of a product out there that will monitor the call recorder outputs (voice audio) from a CIE box and activate an ajustable timed light? We want to use this to indicated that the operator is on a call, the reason we want to use the audio lines is so it will work when the operator is ...

Hey guys thanks for the great support on this, I think I may be a step closer to solving this. I tried draging and droping the tree view and it gave an error message syaing that it could only handle 128 zone/channel combinations and that it had to deleted 64 of ours. If I'm not mistaken I think our ...

The flashcode is what confused me. When I read the radio it had the same flashcode as in the codeplug? Therfore the options should still be the same?

I'll start by saying we are a legit motorola shop. We sent out a radio for repair and the work order said that it replaced:

HLN6458L, FX Front End 800 & reprogrammed firmware.

Because they reprogrammed the firmware we needed to load our codeplug. This is where we get trouble, the RSS software puts ...

I think I am just making a fool of myself here. Please ignore this thread I just realized that we only have the P25 Conventional option not the Trunking option

I did find the BER function under the Project 25 option of the R2670, I still cant get it to work?

Hi there we use 800Mhz Astro Spectras and we have a R2670 test set and I want to perform some Bit Error Testing as well as the transmitter test patterns. Can anyone shed some light on these for me. I havent been able to find any info in the test sets manual.

Thanks, Ryan

Hi there I'm trying to record TX/RX Audio from an astro spectra. I have the TX working fine and the RX from the discriminator. Is there a way to get rid of the discriminator noise and have just the audio? I dont want to come off of the speaker out as it is volume sensative (from control head). I ...

found it! TX can be pulled off of R415 on the command board. Now I just need to sum them together.

Hi there I'm new to the Batboard & this is my first post. I'm wondering how I can get both RX & TX audio to the 15 pin port on the back of a astro spectra mobile. I want to record all comms. I was able to get the RX audio there via pin 21 from the ACCY connector on the command board by moving a ...