Batboard

No, I never solved this. The customer choose to move on and are now looking at Kenwood's products as they are working exactly as they requested.

I have a problem with QC-II decoding on VHF Motorola radios, and I do not know what I am doing wrong. This is an issue on my XTL-5000’s, XPR 6550, XPR 4550, and XTS5000s.

The page is sent out on its correct frequency, the A/B tones are correct. It trips our minitor pagers no problem, as well as all ...

That would help right???

Its VHF, the programmed frequency is 154.1300 and 155.7750 currently.

Thank you,

Higgy

To All:

I am in search of a good Minitor V 2 channel Non-stored voice codeplug. If you can help, please email it to [email protected]

thank you,
Higgy

Wavetar,
Thank you for pointing me in the right direction. I have another computer on the network, so to save the image somewhere other than the laptop's hard drive is not an issue.

Higgy

So here is my dilemma:
I have a Dell Lattitude C610 laptop that I bought through work. It came with nothing more than the computer, a power supply and a mouse. It has windows 2000NT installed, 20gig HD, 1gig processor, and 256 ram.

First and foremost, I want to copy the hard drive so if something ...

To All: I wish everyone a safe and Merry Christmas.

Look here...http://rfparts.com/diamond/mx62m.html

I will assume you have a antenna that will cover 1.8 MHz to 470 MHz......??

Dave

I do not know what kind of antenna it is. This is for on of my newer guys. He came to me asking if I had one and I had to give him the "deer in the headlights" look ...

Hey guys, I am looking to take a Yaesu 857-D and make it so the two antenna ports (VHF/UHF and Lowband) share 1 antenna. I cannot find a product that will allow this, however I could have sworn someone here has done this before.

Can anyone suggest a piece of equipment to make this happen, or ...

What is the output rating for the minitor 2 ear phone jack (watts / ohms) ? Is it different for the MIII,IV, or V?

In theory, could it feed 2 speakers, up to 20 feet away, without an amplifier?

Thank you in advance,
Steve.

The worst part about all this is that they were probably serious when they told you there was a "digital upgrade" for the plectron. They don't know any different, and instead of admitting they don't know, they rather make something up.

Another case in point why the "leaders" of theses cities ...

Same as everyone else, inside with me where its out of the bad stuff. However, if for some reason the radio gets contaminated, it gets deconed by our local chem. specialist company and the bill goes to the company who we responded to.

Sorry to see you go Apco. Another good one gone

SH

Gentlemen and ladies,
I come to this board 2-3 times a day, but rarely post. I have been able to take a lot of very good information from this board and use it. I can say fairly safely that I don't know any one on this board outside of the board itself. If the board was a referral system when I ...

54Ward, Thank you for coming here to offer your assistance. We look forward to talking with you.

I have run into this problem with some of the installs I have fixed for people. Check your grounding on the strobe power supply, and how they ran the power for the supply and the radio. What I have found, is depending on the grounding, the radio would echo the strobe pack over the air. When they ...

I was always told for moto mobiles to double the watts and divide by 12 to get the approx. fuse rating.

SA 06 is the same way. Go to options and select high contrast colors.

A couple of quick questions about diplexers, as I have always went 1 radio = 1 antenna. If you use a diplexer, will both radios still recieve at the same time? If I am transmitting on one, you cant transmit on the other, right? If am transmitting on one, will the other receive?

The reason I ask ...

Thak you for the responses. Will, that is the information I am trying to find. I am also was hoping someone would have a schematic of how they are doing it.

A question for the gurus:
My dad is getting up there in age, but god bless him, he still makes more fire calls a month than I do on our volunteer department. However, the pager isn't waking him up as much anymore, my mom is!!!
Anyways, he has a minitor II with an amp charger with the relay ...

Gentlemen,
I first want to thank everyone for their help. That being said, at 0230am, I finally got so p*$$*d off at the thing that i reformatted the hard drive and fresh installed windows XP Pro. Now it works fine, and faster than it did since I bought the damn thing.

One question though, do I ...

Nope, everything is similar. Like I said, I can run the wizard unto its blue in the face and the computer doesnt even recognize itself on the network. I open up My Network Places after re-booting the computer after running the wizard, and it shows the other 3 computers, but not the itself. I can ...

Gentlemen, I went through and tried renaming the network. That didnt work. I tried running the setup disk on the networked computers, that didnt work. I went through everything, unplugged and plugged everything back in, still no avail. Any other ideas?

Thank you in advance,
STeve

Hello,
I have run into a fairly unusal problem recently. I have a network set up in my house consisting of 2 laptops and two desktops. The main cpu (desktop) in on 24-7 and is hardwired to the router. I also have a 2nd desktop and 1 laptop that are hard wired to the router also. The second laptop ...

Help,
I was sitting here in my office and all of a sudden my backup computer started cycling on and off. It powers up to the Windows XP startup screen and then restarts. It doesnt go past the black windows XP startup screen. Any ideas on whats going on?

Steve

I want to thank everyone that helped me out. ku4zs1's link with the drivers fixed the problem the minute I installed them. I am extremely greatful t o you guys and the mods for adding this section to the board.

Thank you, Thank you, Thank you.

This isnt a laptop, its a desktop, but I will try the drivers you sent me.

The dell auto driver support wont find the correct driver on the computer, and without the ethernet port I cant connect to the net to search for the proper driver.

I appoligize, it is the onboard card that is causing all the fuss.
the system is a Dimension 2400. I was tired when i wrote the initial post and didnt quite explain what was screwed up. Its the onboard ethernet port that isnt working.

ku4zs1 - if you have the right driver for this, can you email ...

I just re-installed windows XP on my Dell desktop. After installing all the drivers that came with the computer, it still will not recognize the ethernet card, and when i try to tell it to reinstall, it doesnt do anything. I have tried everything i can think off to get it to re-install with no ...

Your right, I ment the TK-272g. Thanks Wes for pointing that out.

Is there anyway to make the TK-762g decode QC-II tones like a minitor? I am tired of having to carry both, and my chief insists that he needs me to carry my portable. I know there is options in the programming for two tone, but I'm not sure how to set it up, if that is even what I am looking for ...

according to a tech I talked to the other day, it will be more sensitive, and designed in the old MII case, and use MII accessories and batteries.

TWL, I know why Jim said something good about whelen, they were just showing on the news they have pigs that now can fly.

STeve

We have all department radios engraved with the department name, the year bought, and number in the set of radios bought. So, for a new radio, it would say XYZ FD, and under it would be 04-xx. When it is issued, the person it is issued to fills out a form. The form logs their name, company, badge ...

i am talking about the speaker leads. they are 2 inches at best, and they have to go from 1 end of the truck to the other.

Here is an easy one for you guys. My customer cut the speacker wires extremely short from the siren connector. How can I tell which wire is positive and which wire is negative? Thanks in advance.

Steve

I would definitely look at the Kenwood line then. You can get a TK-*60 series radio, which is 8 channels, no scan for less than $300 if you look around. That price usually includes a new radio, new hi-cap battery, regular rate charger and belt clip. Most dealers will program for you for free on ...

Before I throw you in one direction or another, I and others could use a little more information. What are they being used for? Administration, janitorial, maintence??? How many radios are you looking for? How many channels do you need available? I am a big Kenwood fan, but Motorola also has very ...

I will carry my Sig P229 in 40 S&W anyday. ( I am right now) I does the job, and it doesn't through my weak hand around like my Kimber Custom .45 does. My glock 17 is collecting dust in the vault with my other 9mm's and .357 Sig's. My backup is my .38 revolver in the ankle.

Sig does offer a 10 mm ...

That is a common problem I have found with the P1225's with aftermarket batteries. I have yet to repeat it with any other radio.

I have yet to find a "public safety" style mic for the 272, Kenwood sells a "heavy duty" mic, which is similar to a GP-300 regular speakermic. They can be had for about $45.

I would go with the TK-x80 series from Kenwood. They are pretty durable and will do most of the functions the Motorolas will. The really good thing about the kenwoods are they are unlimited scan. You can scan as many or as few channels that you want, as opposed to Motorola you have a max amount of ...

the older the computer, the better it will be to program a moto radio with. P133 will work with some radios, but not with most. I use a 486 for most radios and it works fine. However, I dont program X9000's or such. I mainly work on genesis, jedi, and Kenwood radios.

I cant seem to find a reference to this style mic anywhere. Do you have a pic of it?

When Cow stated that it held on the vehicle at 60+ miles an hour, I assumed he attempted to test it outside the vehicle also.

My question is - "If you have magnets that are strong enough to hold a radio to the vehicle, and not slowly ride down the surface, wouldnt they damage the radio itself, or ...

I would go with the Kenwood 630/730 combo. I am a kenwood fan, and have used that setup before. Its nice to be able to run both radios from the control head, and though its an orange display, its still a nice alpha display. If you cant afford the *90 series, the 30 series is the way to go.

STeve

since we are on the topic of car starters, how hard would it be to install one on a 2001 Chevy Impala?????

I have dealt with many "other" brand batteries for the jedi series and none of them have compared to original ma "M" batteries IMHO.

Dont get rid of it. If it is a truly asian radio, the mod that has been posted in the other thread should allow you to program that radio. That mod supposedly allows the any market version to be read with a US CPS.

Search found 117 matches

Re: XTS/XTL 5000's nor XPR radios unmuting with QC-II Tones

XTS/XTL 5000's nor XPR radios unmuting with QC-II Tones

Re: MIN V Codeplug

MIN V Codeplug

Re: How do I Upgrade to XP

How do I Upgrade to XP

Re: Merry Christmas

Re: VHF / UHF / Low Band Combiner

VHF / UHF / Low Band Combiner

Minitor 2 Ear Phone Jack Output

Lamp Control via Min II Amp

Home Network

HELP!!!!!! Dell Issues

10/100 card not recognized.

Kenwood Question TK-762g QC-II

Spectra Siren Wire Problem