Batboard

borisf

Hi, I run a corp security team and we have been quoted the items below for an event. As I've never used the wireless versions before only the 3 wire kits, there doesn't seem to be a mic for this. Surely that is wrong but can anyone confirm that the Y adapter also has the mic as part of its features...

borisf

Search the CPS help for "Private Call Confirmed".

borisf

I was wondering if the PMKN4147 USB-to-Mic-RJ45 contained any active components or if it's just a dumb cable like the ones for the older XPR's accy ports on the back.

Has anyone got a pinout?

borisf

There is no way to edit frequency other than CPS, that is why you have to PRE-program. So the help file for the current CPS ist just plain wrong? Mode (Front Panel Programming) Configures the level of access for the Front Panel Programming (FPP) operation. The FPP feature lets the user change certa...

borisf

Simply setting the FPP mode to "dealer" in the CPS does not work for the EMEA ones either. You can still only edit names, admit criteria and TOT per channel. Is there some special accessory or battery that has to be present or maybe a key combination that has to be entered in addition to t...

borisf

Does anyone know the pinout of the TRBO chargers RJ connector?

borisf

Got it, thanks.

borisf

So the talk group value is actually ignored/irrelevant in simplex operation as long as CCs match, but has to be set anyways because that field cannot be empty?

borisf

So what is the preferred way of programming a dedicated simplex channel? Will the radio operate in simplex mode automatically if TX/RX frequencies are the same? Or do I have to set a bogus pair, check "Allow Talkaround" and turn on Talkaround via a side button every time this channel is se...

borisf

KitN1MCC wrote:there was huge thread on the yahoo list on this

Which one?

borisf

MikeOxlong wrote:No, a TRBO radio is limited to one ID in total.

Thank you.

borisf

Plus you have to assign a master radio that dispatches the timeslots, which effectively limits range when used in a portable-only environment.

borisf

Is it possible to have multiple Radio IDs in a single radio so it can be used on different networks/repeater systems? Something like the personalities in analog mode, like a different identity per channel?

borisf

mike m wrote:warning warning my virus protection SW just flagged your so called link to the sound file.

So?

borisf

Andreas wrote:R03.16.00

Thank you!

borisf

Excuse me chiming in but do you know what's the most recent Upgrade Kit for the Waris 5T Portables?

borisf

mfrange99 wrote:codeplug chip for the controller with new freqs and base station identifier being blown.

I'm pretty sure it says "no robot porn" somewhere in the forum rules.

borisf

vamedic826 wrote:Thanks for the responses. Something on the Option Borad was checked

Problem solved.

borisf

Could you post the Decoders that are set up for the Personality that is used on the Channel in question?

The issue most likely lies within the Personality settings on the S5 and PTT tabs or in the way variables are used in the Decoders vs. the content of the Contact List.

borisf

Thanks!

borisf

Thanks for the info.

Can anyone shed light on the performance differences between the primary/secondary band?

borisf

Let's take the APX7500 for example. Can it ... a) receive on both bands simultaneously? b) scan channels from different bands within the same scanlist? c) none of the above?! Is the power output the same on both bands? Are there any differences between the performance on both bands? Please excuse me...

borisf

*bump!

Any news on this Mystery Marketing Module™ ?

borisf

RADIOMAN2002 wrote:I definitly will try and order a pair.

Did you already hear from them?
I saw they got a "starter kit" but wouldn't be surprised if it was sold to corporate customers only.

borisf

I got a yellow coded UHF whip FAE5520A aka 8505241U09 380-400 MHz here that came with a ex-police MT6000E from the UK.

Might that be the source of your antenna, too?

borisf

RFguy wrote:
d119 wrote:If Motorola is involved, you can bet there's something really wrong with the network itself.
That is an ignorant comment and hardly adds value to the subject.

Yay! I love recursive humor!

borisf

Hi everyone! I recently stumbled upon that UK based company called Nabishi. On their website they offer AES crypto boards that are supposed to fit into the Waris HTs (among many other radios). Everything they claim sounds very nice - but I haven't been able to find any Info on the internet except sa...

borisf

Thanks for your advice!

borisf

Sadly I can't put the slider back where it was.

(because I didn't touch it yet.)

borisf

Hi!

When I change the TX power level of a Visar to the maximum value of 127, will I have to re-tune it afterwards or can I just change the value and everything is fine?

Thanks!

borisf

Hi MOTOHCKRs! :lol: I recently aquired some old VISARs and since I'm only used to Sabers and the bigger Jedis here comes the question: After reading the radio to the RSS is the tuning data included in that codeplug or do I have to use the service mode to backup the values to the hard disk? What's th...

borisf

:D I completely understand your astonishment. The monster's for a B-movie set. Of course it's not necessary at all that the setup is working since the Saber isn't visible anyways but it surely would be of great geek value™ if the prop could be used as an on-set intercom. 8) edit: Would it be possibl...

borisf

Hello everyone. I got a H-250 handset which consists of a 150 ohms microphone and a 1000 ohms sepaker. Is there any way of getting this to work on a Systems Saber? I already got a 6pin Hirose adaptor left from another project. So in theory I could just add the matching connnector to the handset... B...

borisf

I didn't even try to fill it since I thought this would be a motion sensor or something similar…

I'll give it a try.

borisf

Come on, this can't be so mysterious...

borisf

LOL…

borisf

Hi everyone.

I just got a Systems Saber that had a PLN7605A option module installed, which I (of course

) replaced with DES.

What is this PLN7605A? Encryption, motion sensor?

Thanks for your help.

P.S.: No CCI stamps anywhere…

borisf

Well, the title says it all:
How do I switch keys on a Systems Saber III if the module is loaded with more than one key?
Is this even possible or are multi-key-modules designed for OTAR operation only?

Thank you.

borisf

AEC,

thank you for the very detailed information.

I'll simply desolder the wire and borrow a KVL to verify that the DES module is working properly.

borisf

Hi everyone. I bought two UHF Saber I off eBay. One is CORE 5D, one 6D. Both of them have DES modules installed, one of them however has the famous bypass wire in place as well. Since I'm lacking a KVL I wasn't able to fill the modules yet. Now my questions: a) Does the bypass wire do any harm to th...

borisf

Any news on the mystery options?

borisf

So what's the easiest way of determining the core version?

Serial#, Model#, RSS?

borisf

Aren't we confusing Jedi and Saber a bit anyway?

borisf

Hi there. I'm just wondering what parts of a Saber R have to be specialized ones and which can be replaced by standard items. Special R-parts: case :lol:, battery Is the antenna a standard one? Can normal speaker mics be used? Is the connection intrinsically safe then? Are all the guts (i.e. RF-boar...

borisf

Hint: The website stated above has moved. Replace all bxa with bis in order to get the links working again.

borisf

Nice install.

Those 1250s look like ugly toys compared to the Spectra.

borisf

Hi everyone. Is it possible to build a KVL-cable for use with a Saber I from an accessory connector? I know some pins may have to be swapped, I know there is a special Hirose connector on the KVL. But is there any fancy circuitry required inside the KVL-cable or is it just a plain connector-connecto...

borisf

Hi everyone. I got a bunch of JEDI Speaker Mics here and I'm not sure which is which. NMN6191B - noise cancelling NMN6193B - standard version NMN6191C - no idea what the C stands for… NMN6193A - comes with a ugly, sticky rubber PTT instead of solid plastic. where does this thing come from? Thanks fo...

borisf

Hi everyone.

What are they using? AES? Any gimmicks such as OTAR?

Regards,
Boris

borisf

Hello everyone!

As stated above - will I need a 2k/XP system or is my Win98SE laptop fin for running the Commercial Series CPS?

Thanks
boris

Search found 52 matches