Batboard

BigTex1136

System has not been rebanded yet and I called and checked on the ID today. ID is good so... Alignment issue maybe thats getting little out of my leage or is it. How hard is it to check that?

BigTex1136

OK so I got one for you guys, I have a Motorola MTX 8000 all programed up on a type II system. I put the right key in the right radio ID and the connect tone. I can RX just fine but when I try and key up..... Nothing. Its trying to TX the light blinks and then I just get the long tone. I have 4 othe...

BigTex1136

OK I found my other RSS with the newer one and now I got it going.

BigTex1136

OK so I have been playing with these stupid radios for way to long. They are starting to make me :x So I bought an older laptop to program with old RSS and i thought I had the right RSS but it tells me after reading the radio that the code plug is to new for this. So I am guessing my RSS ver. r06.00...

BigTex1136

There is a cps for the mts as its what I use for mine.

BigTex1136

Sounds like fun. I don't need smartzone and not for public saftey. I do need type II trunking though. So how would one try this??? Sounds like something to play around with.

BigTex1136

Did moto make a CPS that is XP friendly for the MTX8000 radio?

BigTex1136

Dang it but thats what I thought too. Well I guess I will dump XP and load my old 98. Sounds like a good weekend project.

BigTex1136

OK So I found my old MTSX r0600 dated 97 and it loads but it dont read the radios. So I guess my next question would be is my computer the problem? I have a 1.3 ghz processor with 1.24 or ram running windows XP Pro with service pack 3. Do I need to drop down to win 98???

BigTex1136

So I just picked up 6 MTX8000 radios and need to know what RSS they use for programing?

BigTex1136

Ok I tried the F7E and it took it in the RX box for NAC. I also changed the rx unmute to digital csq. two more questions for you guys. First what should my digital modulator type be??? Does it matter I guess? Not doing any TX if that helps. Next if I have the radio in Mixed mode will I here both. It...

BigTex1136

thanks

BigTex1136

Ok I may have a stupid question but I need some help. I have a VHF XTS3000 and I wanted to add some P25 stuff to scan only on it but I don't know the NAC. So is there a CSQ NAC for the P25 world? Thanks

BigTex1136

OK I am wanting to install a VHF radio on my boat. I have a Fiberglass bayliner. I do not want to do a big marine ant. I would like to install a VHF no gain ant. but don't I need to ground the ant. some how?

BigTex1136

Got it taken care of thanks Jim

BigTex1136

How do you take the radio out of the housing. Thanks

BigTex1136

Opps never mind. I figured it out. secure hardware fail. Thanks

BigTex1136

My xts 3000 II is flashing an error 09/10. What does that mean?

BigTex1136

well nice. I have an old panasonic toughbook cf-29 running windows xp pro. LOL dam dos stuff. What about ribless cable, will it work with the lab rss.

BigTex1136

Ok maybe a stupid question, but how do I get my srecord off my XTS-3000 II? I am using cps ver 5.3 if that helps. Thank you

BigTex1136

Ok I know it can be done just not sure what I need. I want to use my VHF mobile radio to TX to my UHF portable radio and my portable to tx to my VHF. That way when I am not in my suv I can still use my 50watt radio for the long range stuff. Sucks living in the sticks. Portables just dont reach the t...

BigTex1136

Just wanted to know if you can get modat flashed to an XTS3000 II? If so how hard would it be to do it?

BigTex1136

Thanks I got it done today. Had to go digging in old files and found an old key to another system and then got rid of everything and add few new conv. stuff. What a pain in the butt this was but thanks for every ones help.

BigTex1136

I am trying to start from scratch on my MTS 2000. There are some old trucking systems that are no longer in use but I cant seem to remove them. Is there a way to format the radio I guess so I can start over???

BigTex1136

Thats what I thought too thanks

BigTex1136

This is for my Mts2000 radio and I am seeing the light flash rapid orange. Does that mean the battery is too hot/cold???

BigTex1136

I have Ver r02.00.02

BigTex1136

So I was wondering this, you know the beeps you here on an Mts-2000 when on a trunking system when you push the ptt button letting you know your conected and ready talk. Well is there anyway you can program the radio to make those beeps anytime the Ptt is pushed no matter on a trunking system or con...

BigTex1136

You know I am starting to figure this out. LoL I bought an MTS-2000 and it can only be programed with CPS software so I am told. I also bought a ribless programing cable for it as well. Now my question is I have MTS-2000 CPS ver. r02 I have been told that any ver. of MTS-2000 CPS software will work ...

BigTex1136

Ok this may sound stupid but I have never used this CPS software yet so I just trying to figure this out. Now I am running CPS ver r040 and I just wanted to know if this works on most all of motorola radios? One program to program a bunch of radios instead of having to find the rss for each radio? L...

BigTex1136

Why is the NMN6217 will not work, I guess my question is what is the diff between the two?

BigTex1136

Will an Astro Saber speaker mic work with a saber non-astro??? I seem to think they will but cant remember for sure. Thanks guys

BigTex1136

Well I didn't think a L bracket would look good. Always thought they were tackie in the front of a car. So I broke down and just put the ant. in the back. Does not look bad. I will be posting some pics later tonight after work. Thanks

BigTex1136

OK I just bought a 2002 Explorer and it has a sunroof. I don't want to mount the ant. way it the back of the roof I would like to keep them closer to the front just to make the coax run. I have a VHF and UHF to install. I was thinking on the sides of the sunroof? Anyone have any extra tips or info. ...

BigTex1136

what else. The other pics were also taken with my phone. just does better in the day light

BigTex1136

A Night shot

BigTex1136

:o WHAT IS HOLLY HELL COULD ANYONE NEED ALL THAT CRAP FOR? That ride is going to burn down to the ground I am sure with that mess of wires and whatever else there is.... As for the remote mount I will probable switch it some day. I do not have the remote mount kit. I think it would look better also....

BigTex1136

OK its not done still have to install the ant. and that has to wait till my next day off. This is a UHF MCX-1000 w/ DTMF mic. I am going to be installing a VHF soon remote mount kit under the AC controls. I will also be drilling two holes for the ant. on the roof. That is later this week. I will kee...

BigTex1136

OK I am moving to Albq. New Mex and well I know they use some diffrant radio system that I know very little about, but I think its EDAS??? Anyways what do I need to scan there system? Also does anyone know of any cool UHF freq. I could put in my Ht-100 to listen to??? I know there are some batlabers...

BigTex1136

Hey very nice. One quick question about your laptop, what is the cord that comes from your laptops wireless network card?

BigTex1136

Can someone tell me more about this radio. Like what it is? It is programable right??

BigTex1136

I have a Uniden Smu-150 2 channel low power mobile that I would like to get programed t be used as a base station. Can anyone on here do this for me? My local dealer cant do it so before I pay to ship to some Uniden shop I am hoping that a batlaber can do it for me.

BigTex1136

Does anyone know anything about a Uniden SMU-150? Is this a VHF or UHF radio? Is it Programable? Thank you

BigTex1136

So how do I get started? What do I need?

BigTex1136

OK I have read alot of this VoIP post and mybe this will be a stupid question but what and how do I use this? Will it work as a normal phone to or can you only talk to other people on the network or whatever? Also How much will it cost a month and what will I need to buy or get? Thanks

BigTex1136

OK. Thanks for the input. I did not know that. So then looks like I got a really good deal on tem. $200 and the acc. I got with them are all NEW looks like. Or really close to new. Still in there boxes but not there bags. Thanks again

BigTex1136

Ok I have 2 UHF Visars with DTMF pads. I looked up the model numbers in batlabs but I didn't see mine on there. What do I have is my question? Here is my model number. Also I have a des number. What is that? Thanks

My Visar Model Number
H05SDH9AA7DN
Type DES #
00000

BigTex1136

$1800 Oh wait you have not seen the rest of the truck. Maybe $1000. No AC, radio does not work, only one door locks, one tinted window, broken U jont, and no spare tire, but I do have good news. I save alot of money by switching to Geico Insurance. :lol: the truck runs GREAT!!! V6 in it and it will ...

BigTex1136

OK I will play with that on monday. Thanks

BigTex1136

OK I have a Visar and I don't think it is TXing the PL all the time. Sometimes the other radios will here this radio and other times they will not. If all the radios are on csq then this radio works fine. Its only on TX. Works fine on RE with the PL on. So does this mean that the PL board in the rad...

Search found 160 matches