Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Screwed Up Big Time!!!!

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

w1rc
Posts: 61
Joined: Mon Jan 27, 2003 4:40 am
What radios do you own?: Plenty

Screwed Up Big Time!!!!

Postby w1rc » Wed Feb 22, 2012 4:26 am

This is somewhat embarassing..................but I screwed up.

I was trying to remove a MTS2000 portable from the case which was sticking badly and accidentallly tore much of the end off the ribbon cable that goes from the display pcb to the radio chassis in the process. This is a major bummer because the front cover has the LCD display (which worked perfectly) and the keypad. Looks like 7 or 8 of the lines are cut.

I neeed to know if the ribbon cable is replaceable. If not has anyone had any success repairing the broken lines by carefully scraping the film and soldering thin wires to bridge the cuts in the ribbon?

User avatar
K8TEK
"Dark Chocolate"
Posts: 458
Joined: Thu Apr 08, 2004 12:40 pm
What radios do you own?: Dynatac

Re: Screwed Up Big Time!!!!

Postby K8TEK » Wed Feb 22, 2012 4:50 am

I'm sure you could find other nodes to solder the display cables to, but it would be much easier to just replace the display.

P/N 5105238U83
List $124.95
K8TEK::Tim

w1rc
Posts: 61
Joined: Mon Jan 27, 2003 4:40 am
What radios do you own?: Plenty

Re: Screwed Up Big Time!!!!

Postby w1rc » Wed Feb 22, 2012 6:53 am

Naw, I'm an "Old School" amateur radio operator. We try to repair not replace.

User avatar
Astro Spectra
Posts: 646
Joined: Sat Sep 22, 2001 4:00 pm

Re: Screwed Up Big Time!!!!

Postby Astro Spectra » Wed Feb 22, 2012 10:40 am

Do not solder as the flex usually melts!

Best home brew approach is to back the flex across the break with heavy duty fabric backed tape, scrape the conductors clean then bridge the gaps with a conductive silver paint pen. This is a fragile solution and will not last if the flex is ... well flexed in any way. But it does work.

Another alternative it to give up on the flex and use runs of 30 AWG Tefzel insulated wire wrap wire soldered been the flex connector pins (you usually have to remove the SMT flex connectors). You'll need a stereo magnifier to do this and a vey very fine iron.

Equipment repaired in this way really should be permanently labeled so that nowone relies on it for safety related comms.

User avatar
Motoboy
Posts: 102
Joined: Wed Nov 11, 2009 1:58 pm
What radios do you own?: HT1250 I saved from the dump

Re: Screwed Up Big Time!!!!

Postby Motoboy » Wed Feb 22, 2012 12:14 pm

Or you could replace the flex.

8405310W04 is the part number for the front cover / display flex, and lists for $25.20
8405333W03 is the number for the control flex, and lists for $30.
"I don't have a driver's license, either, and that never got me in trouble!" ~Customer

User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

Re: Screwed Up Big Time!!!!

Postby Tom in D.C. » Wed Feb 22, 2012 12:40 pm

Rebuilding kits of various types for the MTS2000 radios appear on eBay regularly. About a year ago I bought a new display and flex for about $60.00 there. Another approach might be a used-but-okay radio. For some reason the UHF units go begging while everyone seems to want the VHF units.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.

User avatar
motorola_otaku
Posts: 1854
Joined: Tue Jan 13, 2004 7:03 am
What radios do you own?: 2 turntables and a microphone

Re: Screwed Up Big Time!!!!

Postby motorola_otaku » Wed Feb 22, 2012 2:12 pm

Got an old HT1000/MTX no display case? Rob the flex from it.
When exposed to Rapid Fire Growth or Thermal Emergency, two things are lost:
1. Ability to use fine motor skills
2. Presence of mind

Squad5
was mwb9122
Posts: 706
Joined: Thu Jan 28, 2010 8:46 pm

Re: Screwed Up Big Time!!!!

Postby Squad5 » Thu Feb 23, 2012 10:42 am

I have a ht1000 case laying around. Cover shipping and its yours!


Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: No registered users and 4 guests