Good afternoon,
Does anyone out there know if the Motorola ACE3640 RTU can use the XTL5000 radio in a conventional (non-trunking) point-to-point mode? The config software, STS, for the ACE3600 RTUs only lists the XTL5000 under the trunking (Smartnet, Simulcast, Smartzone, etc) category.
Regards,
Hugo, W5TAF
SCADA: ACE3640 RTU w/ XTL5000
Moderator: Queue Moderator
-
- New User
- Posts: 1
- Joined: Tue May 12, 2020 7:54 pm
Re: SCADA: ACE3640 RTU w/ XTL5000
Did you ever figure that out???