Pyramid SVR to CDM1250

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
mfdeng5
Posts: 364
Joined: Thu Jan 29, 2004 8:09 am

Pyramid SVR to CDM1250

Post by mfdeng5 »

Hi all having a problem with my SVR200, i cant get it to power once connected to the CDM? I have a cable from Pyramid as well as an after market bought on the flea. Im not very good at these pin-out things to begin with! Anybody assistance would help. Please PM me.
Top
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: Pyramid SVR to CDM1250

Post by n7maq »

mfdeng5 wrote:Hi all having a problem with my SVR200, i cant get it to power once connected to the CDM? I have a cable from Pyramid as well as an after market bought on the flea. Im not very good at these pin-out things to begin with! Anybody assistance would help. Please PM me.

Have you set the jumpers inside the SVR? The app note is on their web page. You will probably need to change JP1 and/or J8 in the SVR.

Jim
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”