Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

BPR40 MagOne Poor Range

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

IRS_BDN_MB
Posts: 30
Joined: Thu Sep 11, 2008 1:58 pm

BPR40 MagOne Poor Range

Postby IRS_BDN_MB » Thu Sep 27, 2012 12:13 pm

Has anyone else had complaints about the BPR40/MagOne both UHF & VHF having poor range right from brand new?

We have noticed that many people who purchase the BPR40/MagOne are returning them due to poor range. When the customer tries a CP200 or a TK2302/3302 they notice an immediate improvement with the range. I tested the power output and receive sensitivity on dozens of BPR40 portables and they are all normal and within the spec's. We have had so many of these radios returned that we refuse to sell them without first providing the customer demo units to see if they will be suitable for their needs. I cannot understand why a brand new radio with good sensitivity and good power output would get noticeably worse range then a different model with the same sensitivity and power output.

Any feedback would be appreciated,
Andy

Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Re: BPR40 MagOne Poor Range

Postby Al » Thu Sep 27, 2012 1:04 pm

I recall seeing a FSB on poor range with UHF BPR40s. It was caused by a mismanufactured antenna(stud too long) causing a direct short to ground at the base of the antenna. You <have> checked this, haven't you?


Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest