Salvage Parts From ToolProofed MTS2000

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
dlawman
New User
Posts: 19
Joined: Fri Mar 13, 2009 6:17 am

Salvage Parts From ToolProofed MTS2000

Post by dlawman »

Can someone advise if all boards (except the controller board) can be re-used from a "ToolProofed" MTS2000.
User avatar
Mfire39
Moderator
Posts: 1331
Joined: Sat Jan 17, 2004 8:53 am
What radios do you own?: APX

Re: Salvage Parts From ToolProofed MTS2000

Post by Mfire39 »

Besides the controller, there is only one other board in the radio (Unless it has encryption), and that's the RF board.. You can re-use it.

-Marc
Stupidity creates job security!

If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..

CPS = Customer Programming Software, Not CPS Software.
User avatar
MTS2000des
Posts: 3347
Joined: Sat Jan 04, 2003 4:59 pm
What radios do you own?: XTS2500, XTS5000, and MTS2000

Re: Salvage Parts From ToolProofed MTS2000

Post by MTS2000des »

Don't forget the front cover/display board! This can be the most valuable part, especially if the display is in good shape (no dead pixels).
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”