Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

VISAR speakermike jack on top connector?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

gsmendelson
New User
Posts: 10
Joined: Thu Dec 01, 2011 7:17 am

VISAR speakermike jack on top connector?

Postby gsmendelson » Sun Nov 03, 2013 2:32 am

What is the connector used for the VISAR speakermike ON TOP of the radio?

The jack looks looks like a standard mini stereo headphone one with a screw thread on top. Wiring diagrams show it to be three connector, ground, sleeve and tip.
Can I plug a regular stereo plug into it? It's for a stationary use, so I am not concerned about it falling or being pulled out.

Thanks in advance for any help.

Geoff 4X1GM/N30WJ

CircleBat
Posts: 170
Joined: Mon Oct 08, 2007 3:11 pm

Re: VISAR speakermike jack on top connector?

Postby CircleBat » Sun Nov 03, 2013 11:37 am

This is a threaded 3.5mm plug that is standardized for all Motorola family of radios... you will either hafta purchase an aftermarket speaker-mic/surveillance kit from klein or pryme to fit this connector.... The other option is to purchase an OEM speaker mic from Motorola to fit the side connector or a 3.5mm surveillance kit for the connector ontop

CircleBat

gsmendelson
New User
Posts: 10
Joined: Thu Dec 01, 2011 7:17 am

Re: VISAR speakermike jack on top connector?

Postby gsmendelson » Sun Nov 03, 2013 11:47 am

Thanks, is there a way to buy just the connector? I want to connect it to a computer.

Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Re: VISAR speakermike jack on top connector?

Postby Al » Sun Nov 03, 2013 6:02 pm

Yes, you can purchase just the threaded 3.5 mm connector. It's available from a company in Jaffrey, New Hampshire. Contact Twitco Distributing at 1-800-899-8948 and ask for Everett Parmenter(or anyone who can take an order). They're not very expensive and if you have a problem PM me, I think that I have several in stock. On the web, they're at http://www.twitco.com.

CircleBat
Posts: 170
Joined: Mon Oct 08, 2007 3:11 pm

Re: VISAR speakermike jack on top connector?

Postby CircleBat » Sun Nov 03, 2013 10:10 pm

If i recall,there is a cap that separates the transmit and recieve using that connector on that accessory conector ontop.. you may blow the Audio Amp due to a floating output if you hook it up to a computer...

circlebat


Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: No registered users and 5 guests