XPR5550 Displaying MDC PTT-ID of other radios?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
Mikey
Posts: 410
Joined: Wed Sep 05, 2001 4:00 pm
What radios do you own?: CDM1550 LS+, HT1250, MCS2000

XPR5550 Displaying MDC PTT-ID of other radios?

Post by Mikey »

having problems getting the radio too display the Incoming PTT id's of other radios on its display, I have the 5550 set up to do a pre-key PTT ID and that works fine, but i cannot get it to display the other radios PTT id's on the display when it recieves them, what am i missing here?????


Mikey
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: XPR5550 Displaying MDC PTT-ID of other radios?

Post by d119 »

Is your receive signalling system on the channel in question set to MDC?

Is ID display enabled under that MDC system?
User avatar
Mikey
Posts: 410
Joined: Wed Sep 05, 2001 4:00 pm
What radios do you own?: CDM1550 LS+, HT1250, MCS2000

Re: XPR5550 Displaying MDC PTT-ID of other radios?

Post by Mikey »

Ok, now I feel Stupid. Thanks d119, I had set up the MDC but had only enabled it on the Transmit side, forgot about the receive side on each channel.
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: XPR5550 Displaying MDC PTT-ID of other radios?

Post by d119 »

Glad it worked out.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”