Mods, if this isn't in the right form, apologies.
Does anyone know what the proper FCC emission code should be for narrowband 2 slot DMR operation, and for narrowband, single slot dmr operation?
- Sarge
DMR emission code
Moderator: Queue Moderator
Re: DMR emission code
so what would NB simplex DMR voice be.......12K50FXE?
Re: DMR emission code
That would depend on whether the DMR system in question is transmitting voice or dataOldDawg wrote:Mods, if this isn't in the right form, apologies.
Does anyone know what the proper FCC emission code should be for narrowband 2 slot DMR operation, and for narrowband, single slot dmr operation?
- Sarge
fineshot1
NJ USA
NJ USA
Re: DMR emission code
I would make note of either code for reference
Re: DMR emission code
OK - this should answer your question either way
7K60FXD 2-slot DMR TDMA data
7K60FXE 2-slot DMR TDMA voice
7K60FXD 2-slot DMR TDMA data
7K60FXE 2-slot DMR TDMA voice
fineshot1
NJ USA
NJ USA
Re: DMR emission code
ya I got that from the chart.....I was wondering if the codes were the same for simplex dmr channels...
Re: DMR emission code
There is no such emission code as 12K50FXE for DMR. The 7K60FXD and 7K60FXE are used for both repeated and simplex communications.
FWIW: 12K50 isn't even a correct prefix for 12.5khz channels; 11K2 is the 12.5khz channel prefix.
FWIW: 12K50 isn't even a correct prefix for 12.5khz channels; 11K2 is the 12.5khz channel prefix.
- Bryan
"So the best solution is to paint them to blue color and throw them to the sea?" in reference to MTS2000 F01/93.
"So the best solution is to paint them to blue color and throw them to the sea?" in reference to MTS2000 F01/93.