Hi guys,
I just received a SVR-200. It is an old Tennessee Highway Patrol repeater. The unit has a calibration sticker from about 5 years ago.
I have reprogrammed the frequencies. However, I am having two problems:
1. The receive audio is rather low. I have to turn up the volume on portables about 1/2 or more to get a semi-decent receive volume.
2. Their is no transmit audio. The unit is transmitting and my CDM is receiving, but no audio is transmitted.
The interface unit is a CDM1550. I have set it up the per the Application Notes on Pyramid's website.
Any help is appreciated.
SVR200 help
Moderator: Queue Moderator
-
- New User
- Posts: 4
- Joined: Wed Nov 30, 2016 7:23 pm
Re: SVR200 help
I replied to you over at RR.
1. You can adjust this via a pot on the circuit board.
2. Can't help you on that one.
tl;dr: Contact support. It's free and they'll help you.
1. You can adjust this via a pot on the circuit board.
2. Can't help you on that one.
tl;dr: Contact support. It's free and they'll help you.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.
-
- New User
- Posts: 4
- Joined: Wed Nov 30, 2016 7:23 pm
Re: SVR200 help
Thanks tuckerm, i'll continue it on over at RR.