Motorola HT1250 - 3.5mm RX Only Earbuds

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
grump
New User
Posts: 19
Joined: Sun Aug 29, 2010 9:24 pm
What radios do you own?: VHF HT1250, EX650

Motorola HT1250 - 3.5mm RX Only Earbuds

Post by grump »

Hello all,
I’ve tried doing searching on this and can’t quite seem to figure this out if this is possible. I’ve seen some various adapters around but I’m not totally sure. So here goes...

This is for a Motorola HT1250 without a speaker mic. I know with a speaker mic this would be easy but it is not a feasible option.

1. Most of the time use conventional 3.5mm consumer earbuds for RX only, no TX is required.
2. If required, unplug earbuds and use radio as a regular HT.

Thanks in advance.
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: Motorola HT1250 - 3.5mm RX Only Earbuds

Post by escomm »

AAHLN9717A with BDN6719A would probably work
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”