Have looked around and have not found any info on if it is possible to move an Astro Spectra 800 radio to the 700 re banded range.
The radio is a model number T04UJH9PW9AN. Model number says it covers the 806 to 870 range now.
Would like to use it for RX only on a P25 system. Have several of these to play with.
Astro Spectra 800 radio mod to 700 operation
Moderator: Queue Moderator
- Victor Xray
- Posts: 845
- Joined: Mon Dec 17, 2001 4:00 pm
Re: Astro Spectra 800 radio mod to 700 operation
Impossible.
Re: Astro Spectra 800 radio mod to 700 operation
for the current price of an 700/800 XTL why bother ?
Re: Astro Spectra 800 radio mod to 700 operation
The synthesizer in the old 800-only drawer is not programmable to 700 MHz channel freqs and spacings, including the mandatory inter-ops. You really do need to acquire an XTL or newer.
Karl - WA8NVW AFA5VB
SHARES + NCS
SHARES + NCS
-
- Posts: 66
- Joined: Mon Jun 01, 2015 6:14 pm
- What radios do you own?: APX6000, APX7000, Quantar, XPR
Re: Astro Spectra 800 radio mod to 700 operation
Same for the ASTRO Saber and XTS3000, you can hex edit the CPS for OOB into 700mhz, but the synthesizer won't lock.
It's better to get an ASTRO25 series radio. They are coming down in price
It's better to get an ASTRO25 series radio. They are coming down in price
Re: Astro Spectra 800 radio mod to 700 operation
OK, thanks for the feedback. I was sort of expecting this answer, but deep down just had that slim ray of hope.
I guess I will strip the radios down and scrap the castings to get a few bucks out of the pile of aluminum.
Jim
I guess I will strip the radios down and scrap the castings to get a few bucks out of the pile of aluminum.
Jim
-
- Posts: 67
- Joined: Fri Dec 02, 2005 7:34 pm
- What radios do you own?: XTS/XTL5000, AS+, etc.
Re: Astro Spectra 800 radio mod to 700 operation
As everyone else said, the pricing is at the part where for an 800 Astro Spectra or XTS3000 I usually gut the controllers/UCMs out of them and toss the chassis/RF boards since they're not worth saving anymore. On the bright side - An XTL5000 with W-series head I've seen as low as $150 and with an O5 head as low as $200... and an XTS5000 or 2500 for around $150-200 as well.