I have a broken ht1250 mic, just curious if anybody has made an attempt at soldering the wires into an XE500 mic, obviously all of the functionality would not be there, but has anybody even tried it?
I have gone through all of the pins on the connector and the wires inside the mic to see what is what with my multimeter
What i have so far is:
Pin 1: RED
Pin 2: BLK
Pin 4: WHT
Pin 5: GRN
Pin 6: BLU
then pin 7 goes nowhere, and there is a yellow wire that doesnt go to a pin (unless this is not just a coincidence and something is broken there)
GRN/BLU are attached to the PTT button, RED/BLK go to the speaker, and BLU/WHT go to the microphone.
So if i had say an XE500 with a bad cord that was being tossed out, or something like that, COULD these wires be made to work if soldered to the same functions?
- Board index General General Motorola Solutions & Legacy Radio Discussion
- Search
-
- It is currently Tue Apr 23, 2024 1:14 pm
- All times are UTC-08:00
ht1250 speaker mic mod
The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!
Moderator: Queue Moderator
Return to “General Motorola Solutions & Legacy Radio Discussion”
Jump to
- Administrative
- ↳ Announcements and Forum News
- ↳ Forum Rules
- General
- ↳ General Motorola Solutions & Legacy Radio Discussion
- ↳ Radio Programming
- ↳ Software & Firmware Releases & Issues
- ↳ Codeplug Information
- ↳ NFPA 1802 Discussion
- Current Motorola Solutions Public Safety / Astro Product Line
- ↳ APX NEXT
- ↳ APX Series Subscribers
- ↳ ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers
- ↳ ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
- ↳ ASTRO Experimental - How to do things a little out of the box
- ↳ ASTRO Products Feature Requests & Future Speculation
- ↳ Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Current Motorola Solutions Professional / Business Product Lines
- ↳ MotoTRBO ION Devices
- ↳ Motorola CP/CM Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
- ↳ MotoTRBO Repeaters, Trunking, and Site Infrastructure
- ↳ MotoTRBO 3rd Party Application Discussion & Support
- ↳ MotoTRBO/Business Products Feature Requests & Future Speculation
- ↳ Experimental - How to do things a little out of the box
- Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.)
- ↳ Smartnet/Smartzone/Project 25 (Phase I/II) Systems
- ↳ Base Stations, Repeaters, General Infrastructure
- ↳ Consoles
- ↳ Experimental - Mods, and how to do things a little out of the box
- ↳ Infrastructure Product Feature Requests & Future Speculation
- Focused Discussion
- ↳ Motorola Digital and Voice Paging
- ↳ Converting Motorola Equipment to 900MHz Amateur
- ↳ Test Equipment & RF Equipment Alignment
- ↳ Vehicle Radio Installs
- ↳ Experimental and Next Generation LMR
- ↳ Motorola Digital Radio Compatability
- Off-Topic Discussion
- ↳ Vehicle Warning Equipment Discussion
- ↳ Computer/Technical Assistance
- ↳ Knowledge Base